Question about 1999 Daewoo Lanos

1 Answer

Where is the timing mark for the camshaft on a 2000 Daewoo Lanos? hey would you send me any pictures of how they look like the timing marks of a 2000 daewoo. i installed the timing belt on my car but is not running at all. i would like to know if you can send me any timing marks to see what i did wrong when i replaced the head gasket.

Posted by on

  • Jimmmyj May 11, 2010

    Single cam or Twin cam?



    Single cam is top cog 12 oclock and lined up with cover mark.

    bottom cog 6 oclock and lined up wiyh cover.



    Twin cam is top cog 12 oclock and lined up with cover

    pre tensioner is other line up position.



    Send me your email address and i will send you pics.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Daewoo Master
  • 450 Answers

Single cam or twin?

Where is the timing mark for the camshaft on a 200 - 466b3f3.jpg 1f27bcc.jpg

Posted on May 28, 2009

  • Steve Hurc
    Steve Hurc May 28, 2009

    couldnt see pics so try again



  • Steve Hurc
    Steve Hurc May 28, 2009

    twin



×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to torke cylinder head bolts and camshafts in a 2000 daewoo lanos 1598 cc


cylinder head bolts and camshaft support holddowns ( there the same bolts )

step 1 18 ft lbs.

step 2 70 degrees

step 3 70 degrees

step 4 30 degrees

Jul 02, 2011 | Daewoo Lanos Cars & Trucks

1 Answer

Where should timeing marks be set on 2000 daewoo lanos


there should an underhood sticker with that specification, it's with spark plug gap

Jul 04, 2010 | 2000 Daewoo Lanos

1 Answer

Engine timing belt 1600 daewoo lanos


It connects the crankshaft to the camshaft, which controls the valves that let the air fuel mix in and the exhaust out of the cylinders

Apr 14, 2010 | 2000 Daewoo Lanos

1 Answer

Timing belt marks 2001 lanos 1.6 liter


The camshaft sprockets have an indention on them you will align them to the inside horizontally so they are side by side. The crankshaft sproket also has a timing mark on it and you will align that with the timing mark on the rear timing belt cover vertically. The tensioner aligns with with the notch on the automatic tensioner bracket. Hope this helps you.

Nov 29, 2009 | 2001 Daewoo Lanos

1 Answer

I need to know how to set the timming marks on the 1.6 double over head cams to replace timming belt


timming marks on cams face each other 3 and 9 o clock crank mark at about 6 o clock mark in cover and sump auto adjuster arrow should be in v mark to set this requires turning water pump by loosening water pump bolts slightly be warned some times this causes pump o ring seal to leak if turning.

May 19, 2009 | 2000 Daewoo Lanos

1 Answer

Locating camshaft positioning sensor on 2000 Daewoo Laganza


hi,
it is under the upper timing belt cover between the camshaft gears. According to the manual touching anything related to timing belt requires removing million parts including right front wheel. I suspect this might be an overkill just to remove upper timing belt cover.

So my advice would be to get it done by some mechanic as u will not be able to do it and may damage other parts also.

Thanks!
Sandy

May 18, 2009 | 2000 Daewoo Lanos

1 Answer

Locating camshaft positioning sensor on 2000 Daewoo Laganza


when you open your hood and you look on the valve cover you see on your left side of top of your cover a cable sticking out from a black piece that is the positioning sensor that cranksup the car

Mar 03, 2009 | 2000 Daewoo Lanos

Not finding what you are looking for?
1999 Daewoo Lanos Logo

871 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...