Question about 1987 Toyota Pickup

1 Answer

Suspension bushings compatibility

I have a 1987 Toyota Hilux, LN56, 2L engine.

I need to replace all the suspension bushings but I can,t find them (do not want to buy the OEM stuff) I want to replace them with those high performance urethane bushings but the only ones i can get are for the LN55 model.
I want to know if those models share the same bushings or if they are different.

Thanks for your help. Gilberto.

Posted by on

  • Thanks, but my Toyota pickup did not came with the 22R engine. It came with 2L engine, which uses diesel fuel. The chassis is the same ? or the fact that it is diesel means that the chassis is different ?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 272 Answers

According to the three sites I checked all of the Hilux models from 1979-1997 have interchangeable bushings.

Posted on May 28, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I am converting a 1996 hilux surf 3.0 petrol to 1kz turbo diesel engine with an ecu and electonic pump system.

You have a major task in front of you .The wiring and computer are not the same. get the computer and wiring loom from the donor engine vehicle. You will have to rework the exhaust system ,cooling system, transmission and drive shaft, rework the front suspension springs because of extra weight. Do check with the main roads department or other body as they may refuse to register or insure it.

Aug 10, 2014 | 1996 Toyota Hilux

1 Answer

2007 dodge caliber suspension arm bushing clunking noise how do you replace it?

It is really hard to say at this point. You are asking a question about a 2007 Dodge Caliber, posted under the heading of 1998 Toyota Avalon, and are making reference to a "suspension arm bushing", which could refer to probably at least 20 different parts of your suspension system.

Jun 17, 2012 | 1998 Toyota Avalon

1 Answer

How to replace lower control arms on 1987 Toyota 1 ton pickup

Disconnect stabilizer bar and shock. Remove Lower ball joint. Remove the two bolts that hold the lower suspension arm to the frame. A lot of times the later model trucks these bolts are completely seized requiring them to be cut and you will need to special order the bolt and bushings from the dealer.

May 05, 2010 | 1987 Toyota Pickup

1 Answer

Need schematic/diagram front suspension 1999 toyota tundra need to tighten suspension, put in new bushings

give these websites a try and if all fails stop by your local Toyota dealership in the parts department and they be able to print you off the pictures and diagrams you will need wish you the best of luck Michigan Man.

Mar 08, 2010 | 2000 Toyota Tundra

2 Answers

1994 camry makes a rattling noise in rear suspension when i hit a bump and have already replaced struts and mounts and stablizer links

are you sure your exhaust aint rattling??ive seen people come in for suspension when its the exhaust,check the mounting bushings,and brackets

Dec 06, 2009 | 1994 Toyota Camry

2 Answers

1999 celica , when going over bumpy road surface get clunken noise from rear end ?

Sounds like you have worn bushes in one of the suspension components. Check the swinging arms for movement or undue slack in the mountings.. If you find any then you may be able to replace the bushes yourself as long as they are not steel cast types, for those you will need a press. Be very careful when releasing the suspension and make sure you restrict the suspension itself, coil spring compressors or release the tension on torsion bar systems. Leaf springs should have a centre bolt holding the spring together and make sure you check all joints for movement including sideways movement. If you are in any doubt about undertaking this repair, DON'T. Seek a professional as injuries can result from incorrect procedures..

Nov 28, 2009 | 1984 Toyota Celica

1 Answer

Hilux surf lower wishbone bushes need replacing .is it a hard job

If you are experiencing grinding noises when turning, it is usually the top strut bearings above the springs that transmits noise inside.
These get the worst of salt spray - so often turn to dust. You will need to drop the suspension to check this area out.
It could be that this ball joint is suspect too, but you can only tell with the pressure off it.
Also check other rubber bushes when the suspension is off, as wear on an inner one may not normally be noticed. Uneaven tyre wear is usually an alignment problem - so have the tracking checked by a garage with Laser equipment.

Jan 03, 2009 | 1993 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides