Question about 1997 Mercury Villager

1 Answer

99 MERCURY VILLAGER

OCE MY VEHICLE RAN HOT IT WOULD BUCK AND ****, SO ONCE IT FINALLY WOULD NOT RUN ANY LONGER, WE HAD THE CATALYC CONVERTER REPLACED, COME TO FIND OUT THE DISTRIBUTOR WAS REALLY BAD, SO THAT WAS REPLACED FOR AROUND 300.00. THEN THE VAN RAN FINE, AND NOW I'VE NOTICED BETWEEN 40-50MPH..JUST LIGHLTY ACCELERATING THE VEHICLE STILL BUCKS AND JERKS.IS IT STILL THE DISTRIBUTOR, I HAVE REPLACED THE SPARK PLUGS, ONE OF THE WIRES THOUGH IS NOT CORRECTLY FITTED ONTO THE DISTRIBUTOR ( THE WHOLE DISTRIBUTOR FOR THESE VANS HAVE TO BE REPLACED) COULD THAT ONE WIRE BE THE CAUSE..ALSO CEL IS STILL ON, HAVE NOT HAD THAT DOUBLE CHECKED YET, THOUGH

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

Claen the MAF sensor in air intake tube with carb cleaner and a toothbrush. Gently brush & spray the 2 wires. Then disconnect the battery for 2 hours and then drive for 10 miles while colputer relearns engine controls and the clean MAF sensor. May run rough for 10 miles.

go here too
http://autos.groups.yahoo.com/group/villagerquest/

Posted on Jun 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix my Mercury Villager 2002 with random misfire?


How to Fix error code P0300 for random misfires on your car ...

diy-auto-repair.wonderhowto.com/.../fix-error-code-p0300-for-random-...
Oct 15, 2010 - How to Fix error code P0300 for random misfires on your car ... amisfire (code P0304) on a 1999 Mercury Villager 3.3L · How to Fix error code P0500 ... I reset my codes and it ran fine for a couple of days, then I started getting ...

(code P0305) on a 1999 Mercury Villager 3.3L - auto repair

diy-auto-repair.wonderhowto.com/.../troubleshoot-misfire-code-p0305-1...
Sep 7, 2010 - The vehicle is a '99 Mercury Village, 3.3L, with 150000 miles on it. The chief ... How to Fix error code P0300 for random misfires on your car ...

2000 Villager Misfire - Car Forums and Automotive Chat ...

www.automotiveforums.com > ... > Mercury > Villager
May 24, 2010 - 2000 Villager Misfire Villager Car Forums. ... i was told that the 3.3L engines of 1999-2002 nissan quests/ mercury villagers are INTERFERENCE engines! ... Hope the following may help, and I will post if my last fix works. ... I have a 1999mercury villager that is showing a random multiple cylinder misfire ...

Rough Idle - 2000 Mercury Villager - RepairPal

repairpal.com > Questions > Mercury > Villager > 2000 Mercury Villager
Repair the code issue, because your Villager has OBD-II which is a very helpful Diagnostic system. Upvote (4) ... My 1999 Villager was running poorly; rough idle, lack of power at highway speeds and the engine problem light indicated random miss-fire, etc. I had new spark ... Have code po306 cylinder 6 misfire detected.

P0301 - OBD-II Trouble Code - RepairPal


Dec 17, 2015 | 2002 Mercury Villager

1 Answer

Code 0430 cleared as soon as I had catalyc converter replaced, now 2197 comes up


Year make model engine size all critical to be able to help you.

Jun 21, 2012 | 2004 Lincoln LS

1 Answer

97 villager replaced motor now transimmison wont shift


Did you put the bolts back in the torque converter on the transmission?

Feb 21, 2012 | 1997 Mercury Villager

1 Answer

1999 Mercury Villager will not run more than ten minutes. After about a minute or so,it starts running worse and then finally shuts down.


it is the cam sensor in the distributor. must replace distributor. import experts on ebay $200
very common on 99.

go to villager quest yahoo group for more help. 3000 members free.

gerry

Jul 30, 2011 | 1999 Mercury Villager

1 Answer

We have a 1999 Mercury Villager which will not run more than ten minutes. We replaced the throttle position sensor,fuel filter and have ran injector cleaner through it with no improvement at all.


Check the codes, you should find that you need to replace the crankshaft position sensor and/or the camshaft position sensor. You can take it to most auto parts stores and they will put it on a meter and run the code test for you.

Jul 30, 2011 | 1999 Mercury Villager

1 Answer

Ran out of gas. vehicle started, ran, drove home,


the fuel pump runs for 5 seconds when you turn key to ON. It runs all the time whie cranking and after engine starts.

Spray some starting fluid into throttle body & see if it starts then. If yes, pump may be bad. Can you hear pump run in fuel tank?

go here

http://groups.yahoo.com/group/villagerquest/

May 13, 2010 | 1993 Mercury Villager

1 Answer

Lose of power on acceleration like its starving


Sounds like there is a load of dirty fuel in that gas tank. Ran good for a while after changing fuel filter, then began to run poorly again. Remove fuel tank, drain and clean out, replace fuel filter AGAIN. That should cure it. Hope this helps

Jun 18, 2009 | 1993 Mercury Villager

1 Answer

What it means p1166 and p1167 on a mercury villager 99


p1166 and p1167 are Air/Fuel ratio code sensor codes (O2 sensor codes) heater circuit problem

Jun 02, 2009 | 1999 Mercury Villager

1 Answer

1996 Mercury Villager with idle problems


Make sure there is no vacuumm leak.
Check and let me know.Then i would be able to tell you all the steps for troubleshooting.
Thanks.

Mar 30, 2009 | 1999 Mercury Villager

Not finding what you are looking for?
1997 Mercury Villager Logo

Related Topics:

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...