Question about 2002 Buick Rendezvous
My dash blinks on and off and the radio and windows don't work when this is happening the car keeps running though 2002 Buick Rendezvous when i turn my key to on or start my dash is flashing and door locks keep locking my windows dont work and a/c dont work ... a couple of times it started normal and no blinking and a/c worked but no windows Please email me with any help email@example.com Thanks Kevin
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Our 2002 did the same thing. Easy cheap fix! Pull the wheel off and check the wiring that goes to the wheel sensor. You will find after removing a few inches of wrap, a broken wire or two. This could be on either wheel, so check both. Fix the wires back up and you are good to go. Hope this helps!
Posted on Aug 01, 2008
I cannot find the 2004, but you can buy it from the dealer. You can download the 2003 and 2005 from this link. http://www.extendedgmwarranty.com/owners-manual/buick_owner_manuals.html
Posted on May 22, 2009
Hello, I work for a GM dealer in Texas. I have seen this issue a couple of times, on your model and several times on the Trail Blazer. That vehicle has a cassette type ignition switch, that have had some issues. It can lose one leg of the switch intermittently and cause several things to go nuts. I just looked on our service site and there are no bulletins related to the issue. If you know a tech at a dealership, have him scan the vehicle for codes and send them to me. Also ask him to check the power mode operation on the scanner, It will let you know for sure if it is a ignition switch.The switch is easy to change and costs about $35 so it is not going to break the bank. Electrical problems are difficult to diagnose at best but really hard not being there to do the testing. If you can give me any codes/ power mode info I will be better able to help you. Good Luck
Posted on May 29, 2009
the BCM needs to be programmed to operate the computer. a GM techII is now required to calibrate BCM to airbag, stereo, keyless entry, and control pcm data. This is required to make it all work. a gm service should have it done within an hour or less just call and ask them how much it would be to program new BCM. it might cost @$75 to $125 but it is needed, to allow the BCM to work properly.
Posted on Sep 11, 2009
Testimonial: "ok...i bought the bcm on line (used)...but the gays in the dealer says i have to buy a new one..because the used cannot be to reflashed...or recoded."
Tips for a great answer:
Feb 09, 2016 | 2002 Saturn L-Series
Sep 17, 2014 | 2002 Buick Rendezvous
Aug 13, 2014 | 2005 Buick Rendezvous
Nov 29, 2017 | 2002 Buick Rendezvous
May 08, 2012 | 2002 Buick Rendezvous
Jan 29, 2011 | 2002 Buick Rendezvous
Dec 27, 2010 | 2002 Buick Rendezvous
Jun 19, 2010 | 2002 Buick Rendezvous
Nov 20, 2009 | 2002 Buick Rendezvous
May 29, 2009 | 2002 Buick Rendezvous
206 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: