Question about 2000 Ford Ranger SuperCab

2 Answers

Power locks won't work from remote

My power locks work when the button is hit on the door. But do NOT work from the remote. I replaced the battery in the remote... and it still doesn't work. Does replacing the battery... causes the remote to need a reprogramming? I have a 2000 Ford Ranger. How do I reprogram the remote?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

No you dont have to reprogram the remotes. Please give as much info as you can about the problem. What is working and not working. Is every other function working with the unit. Is this an after market autostart or OEM (from FORD) or is it one of the vehicle security systems?

Posted on May 28, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 91 Answers

Make sure the button inside the remote makes contact with the outer plastic, might want to open it an try to press it an see if it works...!

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key fob will not reset after replacing battery for my 2001 volvo v70?


Just replacing the battery in a key fob should not require any reset! If the power door locks work using the remote or key then it could be the switch is faulty!

Oct 20, 2014 | 2001 Volvo V70

2 Answers

Is there a way to unlock the rear door of a 2004 jeep liberty from the inside


If you hit the unlock button in the door 2 times, it should unlock the tailgate. Otherwise you may have to go back to the dealership and have them program a new remote for you. If the battery in your remote went dead, it may work again by replacing the battery.

Jul 11, 2014 | 2005 Jeep Liberty

1 Answer

Door locks won't lock/unlock


What kind of vehicle is it?

May 02, 2017 | 1999 Chevrolet Blazer

1 Answer

Power door lock switch?


Sounds like the drivers door lock switch is bad an as far as the auto start remote the contacts under the button get dirty and won't make contact, open the remote like changing the battery and you can probably get at the contact button, if it's a little carbon button they can be cleaned with a pencil eraser and then paper tower with a bit of rubbing alcohol, if it's an actual switch you can try spraying some contact cleaner into the switch. let it dry before you put the battery back in.

Nov 11, 2012 | Ford F-150 Cars & Trucks

2 Answers

2002 VW Cabrio alarm problem: alarm will not un-set. Door will not lock using the key OR the remote. Hitting "alarm off" button on remote, it unsets, then arms again immediately. With engine...


i have a 2002 vw cabrio and won't start after i took out the battery everbody is telling me that anti-theft is lock mode how do i rest it so i can start my car

Nov 08, 2010 | 2000 Volkswagen Cabrio

1 Answer

Door Lock Malfunctioning


power door lock solenoid may need replacement

Jul 04, 2009 | 2007 Mercedes-Benz C230 Sedan

2 Answers

Remote controls for factory alarm system are not working.


Resynchronization may be necessary due to the security method used by the remote keyless entry system. The transmitter does not send the same signal twice to the passenger door module (PDM). • The PDM will not respond to a signal that has been sent previously. This prevents anyone from recording and playing back the signal from the transmitter. • The panic button should still operate normally when the system is out of synchronization. • Resynchronization may be necessary under the following conditions: - The battery in the transmitter is very weak. - The battery in the transmitter was replaced. - The battery in the vehicle has been in a low or no charge condition for an extended period of time. • In order to resynchronize the transmitter with the PDM, perform the following steps: 1. Stand within 1.5 meters (5 ft) from the vehicle. 2. Simultaneously press and hold the LOCK and UNLOCK buttons on the transmitter for 7 seconds. The door locks should cycle in order to confirm resynchronization.

Apr 30, 2009 | 2003 GMC Yukon XL

1 Answer

Frnt door power locks are screeching and/or locking continuous


First replace the battery in your hand set, second drop some all purpose oil into the locks on the door.

Feb 08, 2009 | 2000 Ford Focus

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...