Question about 1994 Chevrolet S-10

1 Answer

Anifreeze spraying out of my engine on drivers side 94 chevy s10 pickup

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

It has to be one of four things:

1. burst hose on radiator
2. hole in radiator
3. bad water pump
4. blown head gasket
You should be able to visually identify these by looking under the hood while the engine is running. If it is a water pump you should have heard a screeching sound prior to symptoms. If blown head gasket there will be water in your oil. Drain a little oil and see if it is creamy colored rather than black. If no antifreeze, you may see water floating on the oil.

PS- I thought of something else, it could be your radiator cap. When they go bad they let water escape.If it is spraying from behind your engine, it could be a heater hose burst. Oh yeah, if it is overheating before spraying it could be your thermostat.

Good luck,
bob

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the brake roter for my 94 s10 chevy pickup


once tire is off there should be two torx oor allan key bolts behind the caliper, unbolt until able to get caliper off. then using a hammer gently tap on the back of the rotor should come off

Jul 09, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

Where is the starter on a chevy s10 1998


http://www.ehow.com/how_6114322_replace-starter-chevy-s10.html Just replaced on my 96 a month ago this should help Mine was under the driver side of the truck

Nov 05, 2010 | 1998 Chevrolet S-10 Pickup

2 Answers

Cant seem to locate Drivers and passengers side Headlight assembly for 1997 Chevy S-10, 3door, 6 cyl.


even at a salvage yard? go to RCSR.com (Rancho Cordova Specialized Recyclers) and get their 800 number, tell them that a 928 Porsche guy from Tahoe sent you to them and I will bet they can ship the part to you in three days for a good price...if you mean locate in the engine compartment try removing the headlight first...

Oct 03, 2010 | 1997 Chevrolet S-10 Pickup

3 Answers

Need firing oder for 1999 chevy s10 pickup 4.3L


1999 Chevrolet S10/T10 P/U 4.3 liter V-6 VIN "W"

66379a1.gif

Hope this helps (remember to rate and comment this).

Sep 15, 2010 | 1999 Chevrolet S-10 Pickup

3 Answers

2002 s10 zr2 runs rough bogs down when you


First check for any cracked pipes leading into the intake manifold If all OK (with no codes showing it probably is OK) try checking the fuel pressure regulator. If you smell fuel from the pressure regulator vacuum side arm (when the vacuum line has been disconnected) it needs to be replaced.

May 28, 2010 | 2002 Chevrolet S-10

3 Answers

Where is the fuel filter located on a 4.3 liter v6 chevy s10


the fuel filter is located on the driver's side of the vehicle, at the front corner of the truck bed.

Mar 10, 2010 | 1999 Chevrolet S-10 Pickup

1 Answer

How do I remove drivers side door panel on 1998 Chevy S10 pickup to repair/replace window regulator?


i think there are screws around the door handle on the in side that need to be taken off the the rest just pop out

Feb 01, 2010 | 1998 Chevrolet S-10 Pickup

2 Answers

Chevy S10 Pickup Starter. Removed the two bolts


Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Mar 14, 2009 | 1998 Chevrolet S-10 Pickup

2 Answers

Needing 94 s-10 pickup 4wd vacuum diagram


i would try putting a c-clamp on the vacuum actuator on the fenderwell and see if the 4wd engages. they go bad alot. Good Luck

Mar 12, 2009 | 1994 Chevrolet S-10

1 Answer

Fuel Pressure Regulator


not sure on an s10 but it should be close to the same position as a full size truck. Should be in the engine compartment, drivers side on top of the motor on the fuel rail. Held in by a snap ring or a c ring. When you buy your part, ask the salesman and they should be able to tell you for sure.

Mar 07, 2009 | 1999 Chevrolet S-10 Pickup

Not finding what you are looking for?
1994 Chevrolet S-10 Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...