Question about 1990 Ford Econoline

2 Answers

AC blower motor switch inop

1990 ford E-150 heater/AC blower motor switch does not work

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

You may have a vacuum line disconnected. check your engine and listen for the hissing of the vacuum line.

Posted on May 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 59 Answers

THE SWITCH IS BURNT OUT AND THE CONNECTOR IS ALSO DAMAGED TOO. REPLACE THE SWITCH PN YH445 FORD PN E6DZ-19986-A AND CONNECTOR WIRING PIGTAIL KIT PN
WPT-103 MOTORCRAFT PN 1U2Z-14S411-BA.

Posted on Jul 08, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

localwonder
  • 6784 Answers

SOURCE: AC blower motor switch inop

the switch is blown. you will need to replace this resistor switch asap.

Posted on May 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHERE on a 1990 FORD TEMPO location is the RELAY that controls the switch to the heater blower ???


IT BE NEXT TO THE BLOWER MOTOR WITH WIRES GOING INTO IT HELD ON WITH TWO SCREWS CALLED A BLOWER MOTOR RESISTER.

Dec 16, 2015 | 1990 Ford Tempo

1 Answer

Heater and air stopped working on my 2000 Ford Focus zx3


CHECK BLOWER MOTOR FUSE AND RELAY.SEE IF POWER GOING TO BLOWER MOTOR YOU HAVE FAULTY BLOWER MOTOR.IF BLOWER MOTOR FUSE AND RELAY OKAY.IF NO POWER GOING TO BLOWER MOTOR BUT POWER AT AC AND HEATER CONTROL SWITCH. BLOWER MOTOR HAS POOR GROUND OR AC AND HEATER CONTROL SWITCH IS BAD.

Jun 12, 2011 | 2000 Ford Focus

1 Answer

I have a 1990 ford van e-150 and the blower motor for the heater doesnt work. I would like to know if it can be bench tested to make sure that it doesnt work before i buy a new one. Ive already replaced...


YES BLOWER HAS A 2 WIRE CONN GIVE IT 12 VOLT POWER FROM A BATT & A GROUND & IF BLOWER MOTOR IS GOOD IT WILL RUN IF IT DONT RUN BLOWER IS BAD NOT SHORE WITH WAY POWER OR GROUND GO REV. WIRES FROM BATT IF IT DONT WORK FIRST TIME

Sep 27, 2009 | 1990 Ford F150

2 Answers

Blower doesnt work on 1990 ford van e-150. I


most likely the blower motor! but could be the blower motor resistor! does it work on high setting? if so it is the blower resistor if not most likely the blower itself!

Sep 18, 2009 | 1990 Ford F150

1 Answer

Heater blower switch does not work


check the fuses, one might be marked heater/ac or something like that. if all your fuses are good and you still have the same problem then you will probably have to replace the blower motor. on most cars you can replace the blower motor resistor and that's the solution to the problem. for your vehicle ford has chosen to make the resistor and motor all one unit so both must be replaced at the same time. no idea what it costs but it looks like you have to take the dash apart to get to it. if you can find one at a junkyard you might be able to swap parts out and get it to work again. hope that helps

Jun 06, 2009 | 1990 Ford Aerostar

1 Answer

AC blower motor switch inop


the switch is blown. you will need to replace this resistor switch asap.

May 28, 2009 | 1990 Ford F150

1 Answer

2004 Ford F150 - AC/Heater blower speed 1 & 2 not working.


You might have a bad speed selector switch, or your blower motor resistor is faulty.

Mar 17, 2009 | 2004 Ford F150

3 Answers

A/c heater blower don't work


try to bypass and apply 12v to motor directly, this will tell you if it's the motor or the switch

Aug 01, 2008 | 1990 Jeep Cherokee Limited

Not finding what you are looking for?
1990 Ford Econoline Logo

570 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...