Question about 1991 Toyota MR2

1 Answer

Can't get any gears while engines on without proper slamming them in, have to keep switching off to pull off in 2nd or 3rd? just bought a clutch but think it needs bleeding, where do i start please he

Instructions to bleed clutch

Posted by on

  • jarvis40 May 29, 2009

    well just as i thought, i asked him to bleed the clutch before fitting a new one as its possably the slave cylinder or master cylinder. he didn't do that obviously as the work is done and still its crunching in 1st n second! now there's a new knock on front end and whining noises coming from my gear box

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Hi thankyou for your quick response, very impressed with this site,


i think i'm about to be ripped off hun, i got the clutch being in 2 minds weather that was the cause of the problem, after lengthy discussions with Trevor at tcb i asked specifically for him to bleed the clutch before spending that much this instance, but like an idiot i trusted his word, i just rang to see how the bleed went and it didn't he's gone straight for the clutch,it did need doing but not this week, pretty sure the slave cylinder is still gonna need doing, wwell either way he's gonna have tpo do it, am i correct in thinking the reason no pressure in clutch is due to a biuld up of air over some time, hence bleeding the clutch is the perfect cure?????? i'm so fed up with being taken for an idiot,from now on i think i'll have to invest in some basic tools and just trall through it myself with some helpfull advice from you guys of course,


thanx again for taking the time to reply


regards collette x

Posted on May 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 626 manual 91, 2.2 non-turbo. the other day the gear box wouldn't let me put it in 3rd, then was unhappy with 1st and 2nd and gets stuck in 4th sometimes while driving, by turning the engine off...


The first check I would be doing is to bleed any air out of the clutch slave cylinder. I would be checking that the clutch system is operating and getting full disengagement of the clutch. From you description of the problem everything points to the clutch not working properly from either hydraulic problems or cable failure.

Feb 24, 2014 | 1991 Mazda 626

1 Answer

Problems selecting 1st gear peugeot 106 1.1 zest


If the clutch is a problem you will have difficulty selecting 1st only as the gears would be spinning from the engine revs.. I would say that the front input shaft (clutch shaft) bearing is failing allowing miss alignment of the synchros and not allowing proper engagement of the gears synchro rings. It means removal and repair to the gear box so the clutch can be inspected while the box is out.

Apr 08, 2013 | Cars & Trucks

1 Answer

1994 toyota pickup 4x4 22re 4 cl. I replace the engine and clutch. Onces the truck is run for about 30 mins. I find it stiff in getting to ist gear after a stop. I also sometimes hear the gear grinding...


It sounds like your clutch isn't releasing properly. Do you need to adjust the pedal free play or bleed the hydraulics? If that doesn't fix it you may need take another look at the clutch you put in.

Sep 30, 2010 | 1994 Toyota Pickup

1 Answer

Have 1st 2nd and reverse, no drive 1988 model 2 wd


sounds like 3rd gear clutch is out (it might have blew out a lip seal or something)
pull the pan c if there is a lot of black on the bottom of pan (no 3rd = no 4th either) the 3rd gear clutches are engaged along with the 4th gear clutches to make overdrive
if the tcc cable is out of adjustment it mite shift at wot (wide open throttle) max rpm (5000-5500)
if it just 1,2, neutral its probly clutches

Mar 25, 2010 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

I can not put my car into first or 2nd without really forcing it does this mean the gear box is gone. 3rd and 4th gear work fine


will be clutch cable or clutch hydraulic system fault depending on what car it is could be clutch assembly sticking clutch plate on splines will not be gearbox fault if you can select gears ok with engine turned off

Nov 23, 2009 | 2001 Daewoo Lanos

1 Answer

Mondeo mk3 TDDI 2.0 90ps,x reg- clutch and gears, manual


yeh if not more sorry! does sound like the clutch

Apr 17, 2009 | 2000 Ford Focus

1 Answer

2000 VW Jetta squealing when shifting from 2-3rd and hard shift down when going up hill


hi if its just second to thrid then the clutch is slipping on thrid gear look at the boxes oil level is important but look at the colour is it red and tranperant as this is ok if its brown its a sign of the clutches slipping i would try a stall test on thrid gear first and if its ok second gear [manually] see is the engine stalls at the correct rpm if you thinkabout it imagine you are in thrid gear in a manuual box and suddenly drop into second it would be hard shifting it could also be a faulty thrid gear solenoid yates210456

Sep 24, 2008 | 2000 Volkswagen Jetta TDI

1 Answer

2nd gear clutching


STOP Downshifting!
STOP Forcing gear change, watch the Engine RPMs and shift accordingly, HOMBRE's are as good as the operator's. Hombre's have dash shift indicators which illuminate when it's time to 'shift' and not before, This has nothing to do with gear oil either. If you've drained it, you best fill it immediately and make sure it's ample level. The heat these gears sustain in is inceredible, cooling lubricant is essential. Here's a tip, while engine is OFF, ignition key is engaged, dash is illuminated, depress clutch peddle, keep it depressed and walk through all gears with gear shift, shifting should be smooth and unpeded, including reverse. If resistance is experienced at one or more gears, gear alignment is off as a result of inproper gear shifting while driving. Continue to drive vehicle just shift slower until clutch needs replacement then do an entire drive shaft upgrade. It worth it, it's great truck.

Jul 25, 2008 | 1998 Isuzu Hombre

Not finding what you are looking for?
1991 Toyota MR2 Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...