Question about 1998 Toyota Camry

1 Answer

Back up lights won't turn on when in reverse

When in reverse back up lights won't turn on 98 camry

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Possibly you have a bad neutral safety switch, or the reverse lite switch @ the trans. Get a test lite @ a parts store. Check all the fuses, then turn on the key to the run position (don't start the engine), set the parking brake! Put the car in reverse and check for power @ the lite socket. If you have power, change the bulbs. You'll have to get deeper into the elec. system if there's no power. Good luck.

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't back-up lights work?


Wire harness in trunk. : Toyota Camry Common Electrical ...

repairpal.com > Problems > Toyota > Camry
Ground wire coonection for tail light Camry 1999. All the lights ( license plate, tail,reverse) that are connected to the trunk are not working.... 1999 Toyota Camry.
images for toyota camry backup lights not working

Oct 14, 2015 | Toyota Camry Cars & Trucks

1 Answer

1998 toyota camry won't reverse and hesitating in drive


This could be a fault with the shift valve, hopefully just requiring cleaning. This is accessible with the trans pan removed, best done on a hoist.

Dec 30, 2012 | 1996 Toyota Camry

2 Answers

98 camry leaks coolant on driver side floor defroster won't work


your heater core is at fault,to replace dash has to come partially apart

Oct 17, 2012 | 1998 Toyota Camry

1 Answer

Reset for 99 Camry LE- Red light won't turn off


what red light the brake light for the parking brake?that will also come on with low fluid

Sep 17, 2012 | 1999 Toyota Camry

1 Answer

1996 Camry reverse lights don't work


Check if you are getting power to the reverse light switch. Turn ignition on, disconect terminals to the switch and check for power on the positive terminal using a light bulb or a test meter whatever. If power is there jumpthe 2 terminals and check if light backup light works. If it does replace switch. If ther is no power at switch check wiring from fuse box. If light does not work when switch is jumped check wiring to back.

Sep 11, 2012 | 1996 Toyota Camry

1 Answer

Reverse lights turn off when brake is applied


This would normally mean a loose earth wire to the light , but check the bulbs as well as a bulb with one filament gone can short or earth back through another circuit You can jump a small wire from the chassis to the light assembly body to check

May 16, 2010 | 1994 Toyota Camry

2 Answers

2000 toyota camry check engine light. trac light on. when i step on breaks reverse square indicator on dash board goes on. No reverse lights and rear light indicator on.


wires are pinched and shorting together near the left (drivers side) trunk hinge. brake light power is feeding back through the reverse light wiring. this will also turn on the check engine light with a neutral safety switch malfunction code as the computer also sees this voltage in the reverse light circuit. Find and repair the wiring, pull the EFI fuse in the panel under the hood to clear the code. Hope this helps

Dec 27, 2008 | 1999 Toyota Camry

1 Answer

1998 toyota camry electrical problems


it is a process...testing powers and grounds to find short/open .you need test light , ohm meter , and good wiring diagram to continue

Oct 09, 2008 | 1998 Toyota Camry

2 Answers

Fuel pump 98 camry


There should be an access panel.
Pull up on the back seat at the front edge to dislodge the locking clips.
Note that the clips can be a really tight fit.

Sep 23, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
1998 Toyota Camry Logo

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...