Question about 1992 Honda Accord

2 Answers

Do i need a special tool to take the harmonic balancer off

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Well it depends what balancer you are pulling off. There are two, the dampening pulley that needs no special tools, and the actual balancer shaft gear right behind the dampening pulley which requires a puller. Both need the dampener holder tool. just a large hex insert that holds the pully in place so you can remove the bolt holding them on. You may need an impact wrench to take it off, and a torque wrench to torque it back to 159ft/lbs when you are putting it back on.

Posted on Oct 03, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 6,982 Answers

Not really special, but, you need a harmonic balancer pulley removing tool...Lots of larger parts store either loan them out or rent them. (if you buy one you may get to use it again in five years,unless you are a tech.) Why are you taking it off?

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the location of the harmonic balancer on my 2.2l Ecotec engine. Car is 2004 Chevrolet Cavalier LS.


CRANKSHAFT PULLEY IS THE HARMONIC BALANCER.YOU NEED THESE TOOLS TO REMOVE HARMONIC BALANCER, YOU NEED HARMONIC BALANCER REMOVER AND INSTALLER TOOL.YOU NEED A LARGE PIN SPANNER WRENCH TO HOLD HARMONIC BALANCER IN PLACE WHILE LOOSEN THE HARMONIC BALANCER BOLT.

May 21, 2011 | Chevrolet Cavalier Cars & Trucks

3 Answers

How do you remove the harmonic balancer on a 1987 GMC R3500 with a 454?


You remove the giant bolt, then you use a harmonic balancer puller, which essentially bolts up rather than using claws to grab. The bolts of the puller go into the pulley fastening bolt holes.

Something must happen to protect the crank threads, a spacer, using the retainer bolt, or whatever, just do not kill the threads.

Feb 25, 2011 | 1987 GMC R3500

2 Answers

The bolt will not come out og the harmonic balancer


try useing an air impact gun the vibration from the gun usally vibrates them off good luck

Dec 13, 2010 | Oldsmobile Achieva Cars & Trucks

1 Answer

Replace harmonic balancer 1996 mitsubishi 3000gt


mcdevito75 here, You"ll need speciall tools for this job, let your local shop do the job.

Jun 16, 2010 | 1996 Mitsubishi 3000GT

1 Answer

I need to chance the crank sensor on a '96 buick park ave. 3800 v-6, what am i going to have to take off to do it ?


Passenger tire, passenger inner well cover, serpentine belt, pulley that attaches to harmonic balancer , nut for harmonic balancer, then harmonic balancer. Sensor is screwed to engine. Disconnect battery prior to and before install of sensor. The 3800 has a special balancer puller designed just for it, not sure were you could rent one it is a specalty tool.

Mar 19, 2010 | 1996 Buick Park Avenue

1 Answer

How to remove the dampening ring on a 1989 dodge dynasty. Iam replacing the water pump


there is a special harmonic balancer puller (and i do mean special) don't use a regular one or you will messup the harmonic balancer you can rent the tool at autozone it's free rental,,, they charge you for the tool but you get your money back when you return the tool works great

Feb 25, 2010 | 1989 Dodge Dynasty

1 Answer

Crankshaft Position Sensor and Camshaft Position Sensor


REMOVE OR DISCONNECT

  1. Serpentine belt from the crankshaft pulley.
  2. Raise the vehicle on a hoist.
  3. Right front tire and wheel assembly.
  4. Right inner fender access cover.
  5. Using a 28 mm socket, remove the crankshaft harmonic balancer retaining bolt.
  6. Crankshaft harmonic balancer using tool J 38192 or equivalent.
  7. Sensor electrical connector.
  8. Foreign object deflector.
  9. Sensor and pedestal from block face.
  10. Sensor from pedestal.
INSTALL OR CONNECT:

  1. Loosely install the crankshaft sensor on the pedestal.
  2. Position the sensor with pedestal attached on special Tool J 37089.
  3. Position the special tool on the crankshaft.
  4. Bolts to hold the pedestal to the block face, torque to 20-40 Nm (14-28 lb.ft).
  5. Torque the pedestal pinch bolt to 3-4 Nm (38-40 lb.in).
  6. Remove special tool J 37089.
  7. Place the special tool 37089 on the harmonic balancer and turn. If any vane of the harmonic balancer touches the tool, replace the balancer assembly.
  8. Balancer on the crankshaft.
    • Apply thread sealer (GM 1052080) or equivalent to the threads of the balancer bolt.
  1. Torque the crankshaft bolt to 140 Nm + 56°(104 lb.ft + 56°).
  2. Foreign object deflector.
  3. Electrical connector.
  4. Inner fender shield.
  5. Tire and wheel assembly, torque to 140 Nm (104 lb.ft).
  6. Lower the vehicle.
  7. Serpentine belt.

Jun 02, 2009 | 1994 Buick Regal Gran Sport

1 Answer

How to remove and replace harmonic balancer on 1990 honda accord 2.2 engine


You need a special tool to hold the harmonic balancer with while you break the center bolt loose. Once loose, should wiggle off.

Mar 07, 2009 | 1990 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...