Question about 2003 Pontiac Montana

1 Answer

04 pontiac montana sliding doors no longer work

Our sliding doors are no longer working on our montana. they just stopped opening. the fuses look good.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

The sliding doors on montana assuming there power have a electrical harness on the bottom track that break and jam the doors but unlikly both have this problem do the doors lock @ unlock if not check switch at drivers door

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dvd player for movies is not working has no power


Possible problems with DVD player after replacing Cabin Air Filter ...

www.topix.com > Pontiac Montana
Apr 13, 2011 - 2006 Montana. Posted in the Pontiac Montana Forum. Leave a Comment ... I recently had my cabin air filter replaced by Jiffy Lube. After they had ... If not, could the dvd player simply blown a fuse and just needs replacing? It just seems ... 14 Famous Movie One-Liners You've Been Quoting Wrong For Years. DVD Repair
Jan 18, 2010
Replace VCR with DVD player in 2001 Montana
Feb 2, 2009
Chevy Uplander "CD Mech Error"
Aug 29, 2008
Reports: 2004-2006 Chevy Uplander Sliding Door Problems ...
Aug 21, 2007
More results from www.topix.com

Pontiac montana sv6 dvd player removal - YouTube

? 1:18
https://www.youtube.com/watch?v=21TTD0ayThc
Oct 15, 2015 - Uploaded by Joshua Freeman
I recently got this 2005 montana sv6 from my grandoa and thedvd player was jamming up and not working ...Missing: movies

Jan 16, 2016 | 2006 Pontiac Montana SV6

1 Answer

Electronics


Reseting the power sliding door gm Montana or venture? In: Chevy Venture, Pontiac Montana [Edit categories]
[iframe style="BORDER-BOTTOM: 0px; BORDER-LEFT: 0px; VERTICAL-ALIGN: bottom; BORDER-TOP: 0px; BORDER-RIGHT: 0px" id=google_ads_iframe_/51859126/answ_desktop_question_answered_600x300_alt_0 height=300 marginHeight=0 src="javascript:"[/iframe]
Answer:

It's in the owners manual under power door. I believe you pull the fuse under the hood for 15 sec with the overide switch in the off position. ...(roesterman adds...).My power door was opening all the way then closing immediately. I used this method to reset door and it worked! This started happening after I had some body work done to vehicle..maybe they disconnected battery or something. Delay locking was locking doors before slider was closing too. This left the door unlocked. I haven't tested to see if this has been corrected by reset yet.

Apr 06, 2014 | 2002 Pontiac Montana

1 Answer

My '99 Pontiac Montana right sliding door and front door do not open. The windows and clock/sometimes CD player don't work nor does the A/C. Is there a fix? The fuses?


2 common possibilities. The plungers and plunger pads on the door and the door jam are corroded. Clean those off with a fine sandpaper, then put a dab of silicone grease on them. Then do the re-set procedure exactly as the steps indicate. If that does not help, then a possible door position sensor or the door control module is bad. A diagnostic using the on/off switch and the open/close switchon the system may indicate a code for door position problem. The door position sensor is part of the door motor/actuator assembly. The control module can be replaced separately. Info from here.

Nov 11, 2009 | 2000 Pontiac Montana

1 Answer

I have a 99 montana passenger side sliding door dont work. Hit either button all it does is clicks and motor seems to be fine.. I went to junk yard bought complete new motor and everything that comes...


I would check the overhead buttons there are two one opens the door, and the other beside it that shows the van crossed out, disables the electric sliding door feature. try playing with that, Also remember, that vehicle must be in PARK for the electric sliding door to open. Make sure the power lock on that door is working, and check the child safety lock when you have it open by the doors catch. Hope that Helps You.

Aug 02, 2009 | 1999 Pontiac Montana

1 Answer

1999 Pontiac Montana passenger sliding door stopped working.


Verify the wiring harness which passes under plastic step & carpet at front passenger side. This wiring harness goes from the firewall to the pillar on the right side and some have crimped connectors in them to act as junction between two or more wires (ususlly the 12volt feed), which deteriorate with time, especially with Salt & Water. Then the electric sliding door stops working and even driver the electric seat can loose power.

May 17, 2009 | 1999 Pontiac Montana

1 Answer

No parking lights, fuse keeps blowing.


There is a ground not connected or a wire open that is causing it to blow

Mar 08, 2009 | 1999 Pontiac Montana

1 Answer

My 1999 pontiac montana rear sliding power door will not work


I went to bulldogsecurity.com and looked up the wiring diagram for this vehcle. However, prior to checking this part, I would check to see if you have a blown fuse. It doesn't hurt and only takes a few minutes. There should be a fuse for that either somewhere on the side of the dash or near the brake pedal area. If not it may be under the hood, but it should be inside the vehicle. You may have multiple fuse boxes. If it has (2) sliding doors it will have a wire for the auto doors in each kick panel (under the plastic trim/molding) when you open the door and look down you will see all of the trim/molding it should snap out or may be held in place with a screw or (2). Once you remove that you should see the wires. It says for the left side it is either light blue or black and the right side is definitely light blue. Trace this wire until you find out where it ends (the motor or switch to control the auto doors) Then test the switch/motor to see if it is bad.

Jan 26, 2009 | 1999 Pontiac Montana

1 Answer

2001 Pontiac Montana


sounds like a fuse went out have u checked ur fuses


Here To Help
Shaun



Nov 25, 2008 | 2001 Pontiac Montana

1 Answer

Auto sliding door


pull inside molding you will see the cables path replace cable he probably broke it

Jun 09, 2008 | 2000 Pontiac Montana

Not finding what you are looking for?
2003 Pontiac Montana Logo

1,810 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...