Question about 2000 Land Rover Discovery

1 Answer

How to upgrade headlamps

Can somebody help me how to change headlamps 2000 model to 2003 model

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

Yep, there are lots of guides out there on eBay or similar, personally I like the one written by TD5Alive, but they're all mostly the same. It boils down to cutting a good bit of metal out of the existing structure of the front end, and then mounting the new light clusters & eyebrows.
Not 100% sure if I'd be happy doing it to mine TBH, it does seem a bit "bodgy". May just buy the front end off a crunched one (that still has a front end of course!) and use that...

Posted on Feb 24, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000. How do I replace headlamp housing?

This video is for a 2003 - 2007 Saturn. For references you can use your type vehicle specs. from 3 years earlier to 3 year later than your particular model car when seeking information or doing repairs on your vehicle. hope this helped.

Dec 05, 2015 | Saturn SC2 Cars & Trucks

1 Answer

I clean my trotle body on my Altima 2003 and it's going up and down the trotle has to replace or how canfix somebody help me please

Did you disconnect the battery negative cable for 5 minutes after the cleaning to reset the idle control system, if not do that.

Jun 14, 2012 | 2000 Nissan Altima

1 Answer

Change headlamp bulb

Instructions on how to change a headlamp bulb are on page 5-56 in the 2003 Pontiac Bonneville Owner's Manual.
If you do not have an Owner's Manual, you can download a PDF version at the link below (direct link)
2003 Pontiac Owner's Manual

May 03, 2012 | 2003 Pontiac Bonneville

1 Answer

How to change the headlight assembly on a 2000 Ford Focus

Information for replacing the headlamp bulbs is covered on page 234 of the Owner's Manual.
If you need an owner's Manual, you can download a free copy (PDF Version) from Ford. Just click the link below.
2000 Ford Focus Owner's Manual

If you are wanting to replace the entire headlamp assembly, There are 4 screws holding the lamp assembly in. This link has pictures and instructions that will get you through the removal process.
Ford Focus HID Headlamp Upgrade Step 2

Apr 28, 2011 | Ford Focus Cars & Trucks

1 Answer

Headlamps inoperative daytime running lamps come on then go out jumped out headlamp switch ground circuit out still no headlamps.

It sounds like your DRL RELAY/Headlight relay. I had this happen with a 2000.

Please rate me if this helps You.

Here is some info that I hope is helpful to you.

This first part is how to disable the DRL
TOYOTA. From the Toyota technical service bulletin EL011-00 Web site for specific models determine where the module is; either the DRL relay or the body ECU, connector number, pin #. Oct 6,2000.

Avalon 1999 DRL relay D4 pin 1
Avalon 2000 body ECU B5 pin 6
Camry S/D 99* DRL relay D6 pin 23
Camry S/D 00* DRL relay D6 pin 10 *twilight sentinel
Camry Solara99/00* DRL relay D6 pin 23
Celica 2000* body ECU B6 pin 17
Corolla 99/00* DRL relay D3 pin 23
ECHO 2000 DRL relay D2 pin 12
4Runner 2000 DRL relay D8 pin 2
Land Cruiser 99/00 DRL relay D8 pin 2
MR2 Spyder 2000 DRL relay D2 pin 12
RAV4 99/00 DRL relay D17 pin 2
Sierra 99/00 DRL relay D4 pin 2
Tacoma 2000 DRL relay D8 pin 2
Tundra 2000 DRL relay D7 pin 2
-disconnect battery- Then remove the wire with pin attached and tape to the harness. (consider just cut and tape the wire) -check operation- [except the 2000 MY-Avalon, additionally you need to ground the wire at the module end of the cut wire]

And here is the Headlamp relay part number.

1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif ACDELCO 1pixel.gif 1pixel.gif E1717C 1pixel.gif 1pixel.gif [RELAY-HEADLAMP] RELAY,HDLP OEM#89057700 ALL MAKES

Mar 19, 2010 | 1998 Toyota Corolla

1 Answer

How do you change the headlight in a 03 grand cherokee.

Remove the jack screw attaching the top of headlamp to the headlamp mounting module.
Grasp upper inboard and lower outboard corners of headlamp and pull headlamp outward.
Remove all of the bulb sockets from headlamp module.
Separate the headlamp from vehicle.

Bulb removal:
Remove the headlamp.
Turn the bulb socket one quarter turn counter clockwise.
Remove the socket from lamp
Remove the bulb from socket

To install, just do everything in revers and take extra care not to touch the new bulb to ensure a long life. Good luck and hope this helps.

Jan 11, 2010 | 2003 Jeep Grand Cherokee

2 Answers

How do i change headlight on a 2003 Murano

To change the headlight bulbs, you will need to remove the wheel liner cover to gain access to the back of the headlamp assemblies. Then you can pull off the screw cap / cover that seals the bulb into the headlamp assembly for the bulb you want to change. Once the cap is off, you will need to disconnect the harness from the back of the bulb. With the harness off, you will then need to either twist a black lock ring to release the bulb, or you will need to push on a metal lever to release the bulb (this varies on models and high and low beams).
Install in the reverse order....

Nov 16, 2009 | 2003 Nissan Murano

1 Answer

How to remove headlight

The headlamps should be held in by two large pull clips . Pull up on them and the headlamps should slide out.

Oct 05, 2009 | 2003 Ford F150 Regular Cab

1 Answer

Parking light burnt out

You should be able to get to it by removing the headlight

  1. Remove the headlamp fasteners.
  2. Using a pry bar, gently pry in the center area of the headlamp assembly. Pry the headlamp assembly straight forward in order to unsnap the headlamp ball stud from the ball stud socket.
  3. Slide the headlamp straight forward and disconnect the headlamp electrical connectors from the forward lamp wiring harness.
  4. Remove the headlamp from the vehicle.

May 04, 2009 | 2003 Buick LeSabre

1 Answer

I need to change the headlamp bulb.

  1. Disconnect and isolate the battery negative cable.
  2. Remove screws attaching headlamp module to upper crossmember.
  3. Remove headlamp module from vehicle.
  4. Disconnect wire connector from back of headlamp.
  5. Remove bulb from headlamp unit.

CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

  1. Connect wire connectors to the back of headlamp module.
  2. Place headlamp module in position.
  3. Install screws attaching headlamp module to upper crossmember.
  4. Connect battery negative cable.

Mar 21, 2009 | 2003 Dodge SRT-4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

80637 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides