Question about 1987 Nissan Maxima

1 Answer

Car wont start

I have a 1987 nissan maxima i just replaced the coil due to no spark to the spark plugs but the car still wont start the security light in car keeps blinking could that have something to do with it and if so how do you reset it.got any suggestions i would greatly appriciate it thank you

Posted by on

  • dtownmydream
    dtownmydream Apr 18, 2012

    did you or anyone has found a solution to this problem yet???

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Have you tried replacing the plugs and wires?

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1987 Nissian Maxima and I am not getting any spark at the coil or any where else and I have replaced the ignition module and coil where do I look next


There is a bybass resistor that powers the coil when the engine in running. It most likely is open. It is square, white in color and about 3 inches long with a metal band around the middle for mounting to the firewall or other location close to the coil.

Oct 22, 2016 | 1987 Nissan Maxima

1 Answer

P1335 manufacturer control ignition system 98 nissan maxima


there is code table here: code table
hope it can help u and good luck

Feb 17, 2013 | 1998 Nissan Maxima

1 Answer

2001 maxima wont start after changing crank and cam sensors


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Feb 17, 2012 | 2001 Nissan Maxima

1 Answer

Where do the spark plug and wires go on my 1999 nissan maxima


The Spark Plugs are located under the Coil Pack in the Cylinder Head. You need to remove the silver cover on the front part of the engine which are held down by Allen Bolts to access the Coil Pack. You will need to remove the two bolts holding the Coil Pack to the Cylinder Head. Pull up on the Coil to remove the Coil and inside the hole will be the Spark Plug. The rear part of the engine next to the firewall has no cover so you will need to just remove the Coil Pack. The Nissan Maxima is very picky about the brand of Spark Plugs you replace them with, You should only use NGK Platinum Plugs or Better in your Maxima, Any other brand will make your car run rough.

Aug 05, 2010 | 1999 Nissan Maxima

1 Answer

I have nissan maxima 1990 problem, no spark in coil cable.


check your coil's power connector for voltage. If there is voltage, replace the coil. Hopefully this helps

Let me know if you need further assistance!!

Aug 22, 2009 | 1990 Nissan Maxima

1 Answer

95 maxima hard to start


Remove the high tension cable to the distributor from the ignition unit. Conduct a spark test. If there's no spark, try to replace the ignition coil or the igniter.

May 28, 2009 | 1995 Nissan Maxima

1 Answer

No sparks from spark plugs in the 97 nissan maxima wont start up


This car has seporate coil packs for each cylinder, have you tried swapping the front bad one with a good one to see if they switch ?
The engine you just put in may have come with some blown coils.
Hope this helps
Sam

May 13, 2009 | 1997 Nissan Maxima

2 Answers

No sparks from spark plug


When was the last time the spark plugs were replaced? They sell an "Engine starting fluid" that you spray directly into your air intake hose to aid in the occasional start-up problem. Have used it before, works very well.

May 09, 2009 | 1989 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...