Question about 2003 Lincoln Navigator

2 Answers

Forgot the factory's code for the door lock pad

How can I find the factory's code for the door lock number pad on my 03 lincon navigator.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The original code is 5 digits next to the fuse box towards passengers front tire on a white label on a black box move bottom 2 wires to see last number.

Posted on Feb 08, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Call the manufacturer they should be able to help u.

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help my 03 Lincoln navigator Driver door unlocks with remote and then locks back when Driver outside handle is pulled i can't unlock Driver door with key I can only open Driver door from inside


Sounds like a door lock actuator motor not working properly inside the door. The door assembly will have to be dissassembled for inspection

May 31, 2015 | 2003 Lincoln Navigator

1 Answer

How do i get the original factory code for the keyless access on the door of my 2005 Lincoln Navigator?


Remove the fuse cover panel located on the passenger sidewall under the dash. Look up above and to the left of the fuse panel. You will see a series of five vertical numbers. This is the factory door code. Keep this number even if you change codes since either code will open the door. Hope This helps you.

Mar 03, 2012 | 2005 Lincoln Navigator

1 Answer

WHERE CAN I FIND THE DOOR KEY CODE?


The universal lock number for ALL Lincolns, and Fords is...press 8 then 9...:) The factory 4 digit code to unlock the door pad is located in the trunk under the lid...sometimes hard to find...You can get free help with this from your local Lincoln/Ford dealer's service manager...they sometimes hace to call the Ford national contact number to secure the factory 4 digit code for your specific Lincoln. There are other uses of the key pad too. Be sure to be persistent with the dealer or national hot line...they can help:) Hope this helps.

Dec 09, 2011 | 2006 Lincoln Town Car

1 Answer

Reset or change door panel code for lincoln navigator 2005. i forget my password code to open the doors.


You cannot change the factory code and you will need it to set a personal code. To find the factory code you will need to open the fuse cover on the passenger side of the vehicle under the instrument panel. Above and to the left you should see a module that has a label/sticker on it with bold numbers (5 of them). Below is a picture of an exemple of the location of the module and how the label looks you may need a flash light. It is down there believe me. Once you have found the code, tried it and am sure you have the right code you can set a personal code, one that you can remember easily. to do this enter the 5 digit factory code. Then within 5 seconds press the 1/2 button. Now enter the new code you want to put in. Once the new code is put in the locks will cycle confirming to you that the new code is put in there. This does not replace the factory code and both codes will work. If you ever want to erace the personal code, press in the factory code and within 5 seconds press and release the 1/2 button within 5 seconds and the personal code will then be removed. I hope this helps you and good luck.


clifford224_599.gif

May 28, 2011 | 2005 Lincoln Navigator

1 Answer

How do you re-program the security code on a 2007


FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. (MAYBE)
KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-Some vehicles use 5 turns of the key instead of 8

Jun 05, 2010 | 2007 Ford Explorer Eddie Bauer

1 Answer

Im lock out of my car i need the factory code number for a 1999 lincon town car signature


you will probbably have to get someone with a kit to open doors most AAA drivers will be able to open doors. After that open trunk on hinge there shuold be a label with 5 numbers that will be your keypad code if it haqs not been changed.

Apr 22, 2010 | 1999 Lincoln Town Car

1 Answer

I don't have a manual for my 2004 lincoln Avaitor but would like to know how I can change the code on the drives door key pad


KEYLESS ENTRY SYSTEM With the keyless entry keypad, you can: • lock or unlock the vehicle doors without using the key. Your vehicle has a factory set 5 digit code that operates the keyless entry system. You can also program your own 5 digit personal entry code. The factory-set code is located: • on the owner's wallet card in the glove compartment • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Programming your own personal entry code To program your own code: 5. Enter factory set code (keypad will illuminate when pressed). 6. Press 1/2 control within five seconds of step 1. 7. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. 8. After the code is entered, the locks will cycle, confirming that the new code has been set. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase the first personal code in favor of the new code. Locks and Security 149 Locks and Security If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control and release. The system will now only respond to the factory set code. Anti-scan feature The anti-scan feature prevents repeated attempts at arriving at a valid key code. The keyless entry pad is disabled for 1 minute after 7 unsuccessful attempts (35 consecutive button presses) at entering a valid key code. The keypad will flash during this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle. Anti-scan will be turned off after: • one minute of keypad inactivity. • the remote entry transmitter UNLOCK button is pressed. • the ignition is turned to the ON position. Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • with the driver's door closed, press the 7/8 control and the 9/0 control at the same time.

Dec 17, 2009 | 2004 Lincoln Aviator

1 Answer

Numeric door codes


you can find the keyless entry codes for the number pad, to unlock and lock your truck, on the keyless entry module, located under dash left side, the code will be the numbers in bold print, these are the factory code numbers

May 22, 2009 | 1997 Ford Explorer AWD

1 Answer

HOW TO OPEN THE DOOR USING THE NUMBER PAD ON THE DOOR


this from the owners manual
Programming your own personal entry code
To program your own code:
1. Enter factory set code (keypad will illuminate when pressed).
2. Press 1/2 control within five
seconds of step 1.
3. Enter your personal 5 digit code.
Enter each digit within five seconds
of previous one.
Do not set a code that includes five
of the same number or presents
them in sequential order. Thieves
can easily figure out these types of codes.
Your personal code does not replace the permanent code that the
dealership gave you. You can use either code to unlock your vehicle. If a
second personal code is entered, the module will erase it in favor of the
new code.
If you wish to erase your personal code, use the following instructions:
1. Enter factory set code.
1 2 3 4 5 6 7 8 9 0
Controls and features
90
2. Press 1/2 control within five
seconds of step one.
3. Press 7/8 control and 9/0 control
at the same time within five seconds
of step 2.
The system will now only respond
to the factory set code.
Unlocking the doors with the keyless entry system
To unlock the driver door, enter either the factory set code or the
personal code (each digit must be pressed within five seconds of the
prior digit). The interior lamps will also illuminate.
To unlock all doors, enter the factory set code or personal code (driver
door unlocks) and press the 3/4 control within five seconds.
Locking the doors with the keyless entry system
It is not necessary to enter the factory or personal code prior to locking
all doors. To lock the doors:
² Press the 7/8 control and the 9/0 control at the same time.
Activating/deactivating
.

May 19, 2009 | 2000 Ford Expedition

1 Answer

Number pad on door


Yes, but you need the factory code also. First enter the factory code (5 digits), then press the 1/2 button, then enter your own 5 digit code. You can use either code now, but there is noo way to erase the factory code.

Mar 29, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
2003 Lincoln Navigator Logo

835 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...