2004 Ford Ranger Logo
Anonymous Posted on May 27, 2009

04 Ford ranger door glass replacement diagram anyone have one?

  • Marvin
    Marvin May 11, 2010

    yes there is one in the Ford factory service manual, this doesn't help you, try ebay for a used manual

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 38 Answers
  • Posted on May 27, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: May 27, 2009
Answers
38
Questions
0
Helped
30695
Points
99

Go to the public library or buy a service manual at the auto parts store for your truck. You should buy one if you plan to keep the truck a long time. If no manual can be found. You have to roll the window all the way down and remove the window crank and the door handle so the door panel can be removed. then remove the window mechanism from the door. Then install the new glass into the frame and tighten the screws (not too tight) the glass will brake. Tape and paper the new glass for protection and then re-install the same way it came out. Put the rest of the parts back together.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2002 Ford Ranger wiring diagrahm

There's no way anyone can post hundreds of pages of wiring diagrams for every iteration of the 02 Ford Ranger. See this post on how to get the diagram you need
https://ricksfreeautorepairadvice.com/get-car-wiring-diagram/
0helpful
1answer

I have a 2005 Ford ranger 3.0 v6 that has been stalling when driving and the inertia switch has been popped but I cant seem to find one online for a replacement part. Does the 04 switch fit it?

The replacement kits (includes Conversion Kit. Includes Switch And Bracket, Cowl Trim Door, Instruction Sheet) are the same for 2004 & 2005 models. Since it includes the trim, the kits are sold by the interior color. Ford discontinued just the switch (made a change) some time back. Ford OEM auto parts Motorcraft filters license plates
0helpful
1answer

Turn signal harness 2002 ford ranger 14a320 diagram turn signal connector wire colors and ppin location

images for Turn signal harness 2002 ford ranger

Ford explorer turn sinal problem got fixed - YouTube

? 3:23
www.youtube.com/watch?v=I2SUGIvYAWc
Jul 12, 2013 - Uploaded by Raybob216 My 04 exployer left turn signal and break light not working fix loose wires behind ... bulb and come to find out wire had popped out of the harness. ... How to Change Ford Explorer 2002 Flasher Relay for Hyper Flasher Relay ... How To Install Replace Turn Signal Wiper High Beam Switch Ford Ranger 95-98 ...
2helpful
1answer

99 ford ranger interior lights wont shut off

the problem is caused by a defective door ajar/dome light micro switch, there is one for each door, they are mounted to the door latch assembly inside the door, to replace it you must remove the door panel and the rear glass run channel, most likely the drivers door is the one that is defective since it sees the most use, they are a real pain to get out,they twist in and the old one will be a bear to remove, twist it out counter clockwise to remove from latch
1helpful
1answer

How many Oxygen sensors in Ford Ranger 1994

There are 2 O2 sensors on your Ford Ranger.  There will be one a foot or two before the catalytic converter and one a foot or two after the converter.  I don't have a diagram but you will only need to look for the identical sensor located up or downstream from the first one that you replaced.
1helpful
1answer

I NEED A VACUUM INE DIAGRAM FOR A 1986 FORD RANGER 2.9 EFI

Make sure that your truck vaccume line goes into the intake manifold where there is a vacuume spiggot at the base of the carb. You may have iadvertantly hooked it up to the wrong place.
0helpful
1answer

Help!!

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

here you go
0helpful
1answer

1992 Ford Ranger Healights

HAD THE SAME PROBLEM

REPLACED THE BLINKER/FLASHER/HIGH/LO/WHINDSHILD WHIPER UNIT $70 AT YOUR LOCAL AUTO ZOO EASY FIX THREE SCREWS FROM BOTTOM OF COLUM. REMOVE PLASTIC COVERS REMOVE 2 SCREWS FROM BLINKER UNIT REMOVE TWO CONECTORS AND INSTALL NEW

HOPE THIS HELPS
Not finding what you are looking for?

203 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...