Question about 2003 Isuzu Axiom

1 Answer

Brake light cover wont come off?

I Removed the screws holding the brake light cover, however the cover still wont come off so i can change the bulb.. I dont know how to get the entire cover off... whats still holding it? and how do i get it off?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

You have anouther screw inside on piller.

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing the brake light lamp/bulb


the plastic posts are guides /support they just slide into place attached to lens just slide/pull the lens off

Jun 18, 2017 | 1995 Toyota Corolla

1 Answer

1990 Toyota 4 runner How do I replace brake light bulb?


which brake light? if it is in the sides, drop the tailgate/back door and remove the screws holding the tail light assembly in and then it should just pop out. If it is a 3rd brake light, 2 screws hold the cover in and remove those and carefully pry the plastic cover out and gently pull on the bulb

Feb 04, 2011 | 1990 Toyota 4Runner

1 Answer

I can't figure out how to get my 2003 Tundra taillight assembly off . I have removed the two bolts inside the tailgate area but it is still attached to the fender on the other side of the assembly . I have...


Unscrew the screws that are securing the brake light cover to the body of the Tundra. Pull the brake light cover off the body of the Tundra. Place the screws in the brake light cover and set it on the bed of the truck. Pull the burned-out light bulb out of the light fixture and discard it. Insert the new brake light bulb into the light fixture. Pump the Tundra's brakes to make sure the new bulb is working correctly. Replace the brake light cover on the body of the Tundra and replace the screws.

Sep 09, 2010 | 2003 Toyota Tundra

1 Answer

How do you change the brake light on the 2006


the carpet cover comes off the rear deck in the back windo then you will find the screws that hold it down

Apr 22, 2010 | 2006 Hyundai Sonata

3 Answers

How do I change brake light bulb of Nissan Sentra 2008


Was able to complete this job successfully:
It's a little tricky to do without pictures, but I don't have any available right now.
  1. Access the trunk
  2. Remove the material covering the light. You'll need to remove the black pegs by lifting the centre part. A flathead screw-driver will help. There are 2 to remove -- one directly behind the brake light and another at the top of the trunk.
  3. Pull back the material to expose the brake light wiring and the metal frame of the car.
  4. There are 2 nuts / screws to remove near the entrance of the trunk. Both are about 4 inches apart and hold the tail light's cover in place. Remove both.
  5. Using a bit of force, you will be able to pull off the entire tail light from the frame of the car. This is done on the exterior of the car.
  6. Rotate the problematic light from it's housing (it should come off with ease) and pull it out of the socket. Brake light and indicator are a 3057K bulb.

Jun 21, 2009 | 2008 Nissan Sentra

2 Answers

My high level brake light has bruned out,(third brake light). I was informed by the dealer the back window panel has to be removed to replace the 3.00 dollar bulb, total cost 75.00 dollars. With some


replace the bulb...??? This requires you remove the rear package deck (to access the bulb & socket). to do this, remove the seat bottom (two bolts hold the rear seat bottom to the chassis, then remove the bolts which hold the shoulder cushions (LH & RH - 12mm bolts) then remove the cosmetic molding around the trunk access (7 to 8 screws) then remove the "C" pillar covers (SRS curtain airbag LH & RH) to access the rear deck package & access the third brake lamp bulb. replace it, then reassemble.

May 26, 2009 | 2006 Hyundai Sonata

1 Answer

Ford Expedition brake light replacement


once those two screws are removed grab both sides of the light and pull out, the lights are held in with to pop locking pins and those two bolts

Mar 26, 2009 | 2005 Ford Expedition

2 Answers

Removing rear light assembly on honda odyssey 2006


Yes, there is a "spear point" plastic clip that is still engaged into a socket type holder in the front outboard portion of the tail lamp assembly. Pry gently with a tape wrapped screwdriver at the front outboard corner of the assembly and the clip will release. You will then be able to see how the clip works and will be able to align and engage it first when replacing the tail lamp assembly.

-T

Jan 24, 2009 | 2007 Honda Odyssey

1 Answer

Rear brake light...


  1. Pop the trunk
  2. Remove the two Phillips-head screws holding the cover on
  3. Using a slotted screwdriver, pry the cover away from the side of the vehicle (carefully!)
  4. Twist the bulb seat away from the cover, a 1/3 turn counterclockwise.
  5. Pull the old bulb out; discard according to any local laws
  6. Push new bulb in
  7. Test both your turn signal functions and brake light functions!!!!!
  8. Return bulb assembly to cover; twist 1/3 turn clockwise to reattach it
  9. Push tail light assembly clips into the seats on the side of the vehicle
  10. Replace the two Phillips-head screws holding the cover on
  11. Close the trunk; clean up

Jan 20, 2009 | 1997 Ford Escort

3 Answers

Right brake light out 2004 Prius


Th other post is incorrect, the 2004 has LED brake lights that are part of the tail light assembly. you have to replace the whole assy. There are two screws that hold the assy in, they are both covered by white cable clips. The clips just pull off and then you can use a 10mm wrench to remove the nuts on the screws. My brake light stopped working and during the removal, the LEDs started working again, hopefully you will find the same situation as the LEDs are supposed to last for years.

Nov 29, 2008 | 2004 Toyota Prius

Not finding what you are looking for?
2003 Isuzu Axiom Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...