Question about 2002 Chrysler Town & Country

2 Answers

Speedometer pegs backwards from time to time on my 2001 twn&cntry

My 2001 town & country does the same thing from time to time.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

Hold down the black plastic TRIP METER RESET switch for 10 sec and ti will go into diagnostic mode. I did this and its cool. Do it with the van turned off!

Posted on Sep 27, 2009

  • dj kb Oct 12, 2011

    thank you its working again... THANK YOU!!!

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,489 Answers

The speedometer cable needs lubricating. Disconnect it from the transmission, pull the cable out, coat it with graphite, reinstall it.

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Speedometer and rpm peg out


Try replacing the output speed sensor...Easy job should take @ 1 hour tops!

Apr 08, 2014 | 2001 Chrysler Town & Country

1 Answer

Turn signals on 2001 Chrysler Town & Country cause dash lights to come on and speedometer & odometer quit working


I would say its probably a short or a ground problem at the turn switch or a wire in that area. you need a test light and probably a multi meater and some nohow a ground or wireing problem can even drive a master teck crasy.

Apr 18, 2013 | 2001 Chrysler Town & Country

1 Answer

I have a 2001 town & country 3.8l lxi and the speedometer goes crazy jumping from 0 -120 and then back again. When this happens the car starts jumping if you try to drive it. I changed both sensors...


The PCM does not calculate the speedometer the TCM does.Most of the time if is not a bad output speed sensor it is the connector.You can purchase a replcement connector from the dealer or a local transmission supply house.Also you must have the correct tire size(Pinion factor) programmed into your TCM and this will need to be done with a professional scan tool.

May 03, 2011 | 2001 Chrysler Town & Country

1 Answer

2002 Town & Country minivan, bought it used. Second time I drove it, speedometer stopped working. What could cause that??


Sounds like it could be the speed sensor, it's located on the transaxel just about where the right side axel goes in, try un-plugging it and plugging it back in.

Jan 20, 2011 | 2001 Chrysler Town & Country

1 Answer

2001 Town & Country batterys bad/speedometer got stuck behind 0


a scanner that gets into the instrument cluster computer can reset the needles. or take the dash apart and manually turn dash cluster upsidedown, then the needles will move so rotate untill the needles are reset.

Aug 26, 2009 | 2001 Chrysler Town & Country

2 Answers

Right power seat will not lower


You need a new seat track. The motor is binding, and needs to be replaced.

Jun 10, 2009 | 2002 Chrysler Town & Country

1 Answer

Needle on the speedomer has goon all of the way around and is pegged up against the pin


I had this same thing occur in my 2001 Town & Country, it always happens when I have to do any electrical work that requires unhooking the battery. Once the van restarts, the needle swings around backwards, but there is a small retaining nub that keeps it from making a full revolution. In my 2001 this is easily fixed, you just pop off the dashplate around the upper half of the steering column, and then there are four bolts holding the clear plastic instrument panel cover in place. Once you remove those, you just pull off the speedometer needle, then replace it on the other side of the retaining nub. Be careful when touching the little nub however, it is rubbery and quite delicate. Hope this works for your 2002!

Apr 19, 2009 | 2002 Chrysler Town & Country

1 Answer

My speedometer hand is below the peg that is supposed to stop it at zero. Help..


i had this happen what i did was got on the highway and got up to about 85 and the speed omiter went back to where it should be

Apr 06, 2009 | 2001 Chrysler Town & Country

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...