Question about 2003 Jaguar X-Type

2 Answers

Car security system do not respond to remote(new battery)

My 2003 X Type jaguar car remote does not lock and unlock the car door.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try re-programming key fob. It's also on fixya.com. I did it and it just worked

Posted on Jun 01, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi,when you remove the key from the ignition,does the little flap in the barrell flip down?.if not the key fob wont work.it thinks the key is still in the barrell.after a tiny bit of wd40 on the key it was ok.it pickled me head for ages.maybe its that. paul

Posted on Jun 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Security system won't let car start.was working fine needed a battery. changed battery now won't run,, just cranks over


Close all doors and trunk and lock with key and hold key in the lock position for about 10-15 secs. Then open with key and start the car. Feedback welcomed. Thank you.

May 16, 2015 | 2003 Jaguar S-Type

1 Answer

2003 Jaguar X-Type... I unplugged the battery cables to reset the computer, now it won't start. What do I do??


Does it click at least? Most likely battery terminals are dirty and need to be cleaned and greased. Could be security system needs to be turned off at driver's door lock, left quarter turn, twice.

Oct 13, 2013 | 2003 Jaguar X-Type

1 Answer

Jaguar x-type 2.5 se problem with remote central locking


Do you smoke in the car? could be that the infra red sensor in the car (usually near the interior mirror) needs cleaning. I bought a Renault Scenic which had same problem, it would only unlock from very close to the car. After trying new battery in the remote I cleaned the sensor and never had any more problems. PS I assume you've tried a new remote battery?

Jun 10, 2012 | 2003 Jaguar X-Type

1 Answer

How do I program key fobs on a 2003 Jaguar X-Type?


Full details can be found at http//www.bluejag.co.uk Jaguar X-Type Programming (Pairing) a Remote KeyFob X-Type 2.0, 2.5 and 3.0L
keyfob.jpg

Programming or pairing a new remote Keyfob for the X Type is a very simple job that will cost a substantial amount if it is done by Jaguar. It's annoying but this may need to be done if your Keyfob battery has been allowed to go flat, or the car battery has been removed for any length of time.
Follow these steps exactly and you should have no problems, pairing old or replacement Keyfobs for your car.

1.)I would recommended that you ensure all key fobs are fitted with new batteries. ( Click here to see battery replacement guide).
2.)Get in the car and close the drivers side door.
3.)Put the key into the ignition and turn to position I.
4.)Wait 5 seconds
5.)Turn the key quickly to position II then back to I four times.
6.)You should hear a single chime.
7.)Remove the Key
8.)For each Keyfob in rapid succesion. Press any single button on the keyfob you wish to pair, you should hear a chime as each Keyfob is paired with the security system. After the chime do the next Keyfob.
9.)Check operation of each Keyfob.

Sep 14, 2011 | 2003 Jaguar X-Type

2 Answers

My battery was no good on my jaguar s type 2000 and i purchased a new one after installing i try to start and it wont start soundsas if i have no gas and the horn comes on


you're cars security system is activated. de activate and you should be good to go. It happens when you disconnected power to car.

Mar 23, 2011 | 2001 Jaguar S-Type

1 Answer

Security system has car locked up... will not start


I have found that if your security system on the car has locked itself the normal procedures are:
  • Using the remote, turn the alarm on and off. Sometimes it takes more than one try.
  • Using the key, lock and unlock the drivers side door (may take more than one try). Do this with the door closed.
  • You may also need to try unhooking the battery for a few minutes and then after hooking up the battery (the alarm may activate and sound off when the battery is hooked up again) try one or both of the first 2 steps.
If these do not work you may have a defective security module. This may end up being a dealer fix at that point unless someone else has another suggestion. Hope this gets ya going...

Sep 11, 2009 | 2004 Jaguar S Type

2 Answers

04 jaguar x type 2.5 problem with locking mechinisum


have you try pressing the unlock botton two times if the replace batteri on remote or test umlock swich on passanger side

Jun 09, 2009 | 2004 Jaguar X-Type

3 Answers

2004 xtype jaguar key fob suddenly stopped working car locked and alarmed if i use key in the door will the alarm go off if so how do i stop it


Your key fob needs reprogramming, and yes the alarm will go off when you open the door, but you have enough time to put the key in the ignition which will prevent the alarm sounding. Car is usable until you get the fob sorted by locking and unlocking using the key.

Jun 07, 2009 | 2003 Jaguar X-Type

1 Answer

Keyless remote wont work


try to reprogram the remotes using these instructions..........
i assume for 02 explorer not th 05 frestyle listed (although similar procedure)
Remote Transmitter Programming NOTE: All remote transmitters are programmable and must be set at the same time.
  1. Make sure that the anti-theft system is not armed or triggered and key code programming is not active.
  1. Open the door, then press the driver door lock control switch UNLOCK button.
  1. Turn the key from OFF to ON 8 times within 10 seconds, with the eighth turn ending in ON. If the program mode is sucessfully entered the doors will lock and unlock to confirm.
  1. Press any button on a remote transmitter, and the doors will lock and then unlock all doors to confirm that the remote transmitter is programmed. All remote transmitters must be programmed within 20 seconds of each other. Up to four remote transmitters can be programmed to the vehicles security module each time programming mode is entered.
  1. If the door locks do not respond for any remote transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Locks, Latches and Entry Systems — Late Build or Locks, Latches and Entry Systems — Early Build in this section.
  1. NOTE: Exiting is acknowledged by locking and unlocking the doors if at least one remote transmitter has been programmed.
    Exiting the programming mode is accomplished if one of the following has occurred:
    • The key transitions to OFF.
    • 20 seconds have passed since entering programming mode or since the last remote transmitter was programmed.
    • Four remote transmitters have been programmed.

Jun 02, 2009 | 2005 Ford Freestyle

1 Answer

Programming keyless remote


2003-04 Mazda 6 REMOTE PROGRAMMING


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!

Good Luck.

Jul 12, 2008 | 2003 Mazda Mazda6

Not finding what you are looking for?
2003 Jaguar X-Type Logo

648 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...