Question about 1987 Peugeot Liberte

2 Answers

I have a peugeot expert van 02 model 1.9 diesel fault is indicators stopped working and no hazard lights all lights flash when using central locking ive checked all fuses in interior and in engine area and all are fine i have no manual for this van so im in the dark as which fuse it is or if its a relay and where is its location can you assist please. Hi, I have the same problem on my 03 plate Expert, I have changed the flasher relay unit behind the dashboard by the steering columb but still have this intermitent problem, sometimes they work and sometimes nothing, help please on what might be the problem???

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 249 Answers

Check to see if you have power at the hazard light switch, it could just be unplugged, if u can get another good switch swap them over, i know its a power prob to that haz switch.

Posted on Aug 16, 2009

Testimonial: "Excellent, thanks, problem solved."

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Worked for me to just changed the hazard switch. Thanks.

Posted on Oct 21, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audi a6 avant door


If all else fails you may need to change the central lock system control module. You need to supply dealer with Vin #

Apr 01, 2014 | 2003 Audi A6

2 Answers

Rh indicators flashing fast .all bulbs lit .normal speed on lh and hazards


you have a bad earth or ground if your american (HI) if this is a peugeot then its most likely a fault with the back light ,its a common earth between all the bulbs and i bet if you remove the back light bulb holder thing you will see the other bulbs glowing as the indicator come on ,also the stop light will light up the other bulbs clean the bulb bases and grease the bases with vasaline then find the common earth and run a new cable from a bolt to the chassis nearby and iam sure it will cure it

Oct 10, 2012 | Peugeot 406 Cars & Trucks

1 Answer

Key fob on my 54 plate peugeot expert van will not work after replacing the battery,no visible led on fob


most cars need a reset when being worked on even as simple as changeing the battery find fuse box look for fuse Labled (hazard or HZD) remove for 15.sec. then put back in it should reset the ECU

Apr 04, 2010 | 2005 Peugeot 405

1 Answer

My indicators have stopped working also the heater


If the the indicator light's illuminate ,when turned on ,the signal flasher is at fault .
Replace it.

Mar 07, 2010 | 1991 Peugeot 405

1 Answer

Peugeot expert 1.9 diesel van 2005 non turbo/ engine wiring fault


If the engine management light is on you should get it plugged in to a diagnostic tool.Also check the wiring with an ohm meter .

Mar 03, 2010 | 2005 Peugeot 405

2 Answers

Peugeot Expert Van- Erratic temp guage & 'STOP' dashwarning light


temperature sender unit top of engine cylinder head make sure its okay
and make sure wire going to it is not grounding
if it grounds or earths it will send the gauge up and down

Feb 22, 2010 | Peugeot Liberte Cars & Trucks

1 Answer

2004 Ford f-250 diesel. The hazard lights and turn indicator lights do not work. The fuse is good. The problem is not in the multifunction switch. I can not find a flasher relay.


Ford is notorius about the hazard switch going bad in the column. I have three trucks from 95 thru 02 that have the same problem. we just don't use the hazards and the turn signals work.

Oct 26, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Indicators are not working


had this before where the front indicators were not working and like you it drove me mad because the vehicle was booked in for its inspection.straight away i suspected the hazard switch,Anyway i had a spare flasher unit so i changed it and they worked ,So after i came back i took the old flasher unit apart and cleaned the contact on the solonoid and that started working as well when i put it back in.

Oct 24, 2009 | 2005 Peugeot 405

2 Answers

Peugeot Expert van Alarm


i have a new van but need to remove dent in bumper

Jun 12, 2009 | 2006 Peugeot 604

1 Answer

While driving my hazard lights keep going off at will what should i do ? The central locking unit is in situ but the there is no actual alarm and although you press the key and the indicator lights flash...


a hazard fuse is big and round mainly silver in color usually under the steering wheel or in the glove-box or on the side of the dash when you open the door

Apr 22, 2009 | 2007 Audi A3

Not finding what you are looking for?
Cars & Trucks Logo

1,140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...