Question about 2002 Ford E-Series

Open Question

EF ford falcon beeps on start and every 45 minutes of running

The beeping continues for 20 to 30 seconds. Beeps repeat in 45 minute cycle. It is similar to the warning beep if lights left on after ignition turned off.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 9 Answers

SOURCE: Beeping

When you turn key on check if airbag light on instrument cluster comes on. 5 beeps is the tone to let you know your airbag light in instrument cluster is inop..

Posted on Sep 04, 2008

Ad
  • 1 Answer

SOURCE: Beeping noise - 2005 Mustang

I have a 2005 Mustang, and sometimes if you have something in the passenger seat (like a bag or purse) the car may think that it's someone sitting there without a seat belt. Other beeping sounds come from your blinker being on too long while driving, your trunk may not be closed all the way, or your door may not be closed all the way, or your over head lights may be on. It's so easy to rub up against the light when you get into the car, and in the daytime you won't know that it's on. Your dash will light up, but it's such a quick flash, you can't tell what it is.

Posted on Sep 11, 2008

mrgreenz
  • 962 Answers

SOURCE: beeping sound inside cab of 1997 ford f150

Disconnect the battery negative cable then reconnect. See if that helps. Battery life should run up to 4 years.if you replace the battery yourself , you may experience some check engine light or other lights on the dash. But do the same. disconnect the negative termonal and let sit then reconnect. you may have to do this several times. the computer de-programs when the battery is removed. you have to let it re-program itself.

Posted on Nov 23, 2008

  • 1 Answer

SOURCE: stop light and handbrake warning sign keeps coming up on my dash

You need to top up your brake fluid right up to the max line - works a treat!!!

Posted on Mar 24, 2009

  • 532 Answers

SOURCE: Beeping noise from a 2000 Ford Expedition

sounds like what my Ford Bronco has done,is your air bag light on?The beep 5 times in my truck was the module for the air bag,i

Posted on Apr 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

7 beeps at startup on a 2000 Ford Explorer


Sounds like your anti-theft immobilizer has kicked in. As long as you have the original lock, and key fob with immobilizer chip, the standard way to re-pair the key and lock is to remove the battery leads for 30 minutes and reconnect.

You are better reading Codes with a code reader which will give you an accurate display with a numerical code.

There are a few clues here.

http://www.ford-trucks.com/forums/132672-explorer-5-short-beeps-every-20-seconds-or-so.html
Explorer 5 short beeps every 20 seconds or so Ford Truck Enthusiasts Forums

Feb 29, 2016 | Ford Cars & Trucks

1 Answer

My Falcon seems to take a while to start and I have to press the accelerator as well or it will stall, whats the deal?


My 2004 BA Falcon won't start. Apparently it's low - Fixya

www.fixya.com/cars/t12343045-2004_ba_falcon_start_apparently_s_low
Apr 8, 2012 - Apparently it's low on - Ford 2005 Falcon 4.0 question. ... Ba engine generally is strong, common fault is ecu, if hard starting when cold, pour hot water on computer and it ... If the headlights do not dim or go out, then the battery is likely ok..... Automatic 2004 BA Falcon stalls while driving ... Open Questions:.

My xr6 won't start. Comes up saying immobilized. - Fixya

www.fixya.com/.../t12430461-xr6_start_comes_up_saying_immobilized
Feb 6, 2012 - My xr6 won't start. ... Question about 2005 Ford Falcon 4.0 ... you will get airbag errors popping up for a few weeks then after a while it .... in a while it willstart and run for about 20 seconds, then it dies and won't start. ... Open Questions: ...You may NOT copy or distribute the content that appears on this site ...

Ford falcon sometimes won't start - Ford - Automotive - Whirlpool ...

forums.whirlpool.net.au > Automotive > Ford

WhirlpoolOct 26, 2010 - I have a EF Falcon that has an intermittent problem with starting. ... It might take a minute or 5 minutes or persistent retrying. ... Normally if you wiggle the T-Bar around it will then start. ... motor with a rebuilt unit, I had a remove starter on myalarm, and would use the remote start while using my jack-handle to ... Worst Car You Ever Owned
Jun 1, 2012
LPG conversion problems with stalling - Ford
Jan 16, 2012
More results from forums.whirlpool.net.au

2006 Ford Explorer Engine Stalls While Idling: 24 Complaints

www.carcomplaints.com/Ford/Explorer/.../engine_stalls_while_idling.sht...

Jan 27, 2016 | 2005 Ford Falcon 4.0

1 Answer

Loud repeated beeping upon start up


without scaning veichle do not do anything.mostly you need computer program.try

Apr 26, 2014 | 2004 Cadillac SRX

1 Answer

Beeping noise interior 2001escape


Same as the Ford Ranger. The Airbag Interlock for turning the Passenger side air bag off has a burned out light. You can dismantle this unit and replace the light with one from ford but it has to be soldered in place.

Oct 21, 2012 | 2001 Ford Escape

1 Answer

Car beeping at me. (not the horn)


Hi Laura,, You'll need to take the vehicle and have a diagnostic scan carried out. The warning is because something is wrong and if it is something that is not obvious, you need to find out what is being reported. Regards John

Jan 02, 2012 | 1999 Volkswagen Passat

1 Answer

'02 Rendevous beeping randomly, no lights or trouble indicatiors on. Beeps when parked, beeps while driving, no rhyme or reason apparant. sometimes goes 10 or 15 minutes without beeping, other times beeps...


The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings through the left front speaker. The radio receives audible warning requests via the class 2 serial data line from the IPC or body control module (BCM). If the radio receives multiple audible warning requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
Fast rate chime--200 pulses per minute
Medium rate chime--150 pulses per minute
Slow rate chime--50 pulses per minute
Single chime

Is the sound heard different from typical Audible Warnings ?

Fasten Safety Belt Warning
The radio activates the fasten safety belt audible warning as requested by the IPC. The IPC sends a class 2 message to the radio indicating the chime frequency, slow rate and duration (5 pulses). The fasten safety belt warning sounds and the fasten safety belt indicator illuminates when the following occurs:
• The ignition switch transitions to ON.
• The inflatable restraint sensing and diagnostic module (SDM) detects that the driver's seat belt is not buckled, signal is low. The IPC receives a class 2 message from the SDM indicating the driver's seat belt status.
If the seat belt is buckled when the ignition is turned on, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime stops. If the seat belt is unbuckled after the initial transition to ON, the chime does not sound.
Headlamps On Warning
The radio activates the headlamps on warning as requested by the body control module (BCM). The BCM sends a class 2 message to the radio indicating the chime frequency, fast rate and duration, continuous. The headlamps on warning sounds when the following occurs:
• The ignition is OFF.
• The BCM determines that the driver's door is open, signal is low.
• The BCM determines that the headlamp switch is in the park or head position.
Key-In-Ignition Warning
The radio activates the key-in-ignition audible warning as requested by the BCM. The BCM sends a class 2 message to the radio indicating the chime frequency, medium rate and duration, continuous. The key-in-ignition warning sounds when the following occurs:
• The ignition switch is OFF.
• The body control module (BCM) determines that the driver's door is open, signal is low.
• The BCM determines that the key-in-ignition switch is closed, signal is low.
Turn Signal Reminder
The radio activates the turn signal warning as requested by the IPC. The IPC sends a class 2 message to the radio indicating the chime frequency, medium rate and duration, continuous. The turn signal warning sounds when the following occurs:
• The ignition switch is in the RUN position.
• The turn signal switch is in either turn position, sensing, within 1 second, an open to B+ transition in the turn signal control circuit, left or right turn.
• The vehicle has traveled a distance of 1.2 km (¾ mi) by counting pulses on the vehicle speed input circuit.
The IPC turns OFF the turn signal reminder when either the ignition switch is turned to the OFF position, or the turn signal switch returns to the OFF position, sensing, within 1 second, no transitions from open to B+ in either of the turn signal control circuits, left turn or right turn.
Additional Chimes
The following chimes will turn ON when an associated indicator/message turns ON in the IPC/DIC:
• ABS indicator
• AWD Disable indicator
• Battery/Charge indicator
• Brake indicator
• Change Engine Oil indicator
• Door Ajar indicator
• Hot Coolant Temp indicator
• Low Brake Fluid indicator
• Low Fuel indicator
• Low Oil Level indicator
• Low Oil Pressure indicator
• Low Tire Pressure indicator/reset
• Low Washer Fluid indicator
• MIL (Service Engine Soon) indicator
• Oil Life Reset
• Park Lamp Out indicator
• Rear Hatch Ajar indicator
• Service Traction System indicator
• Service Vehicle Soon indicator
• TRAC OFF indicator
For a description of an indicator refer to Indicator/Warning Message Description and Operation .
For diagnosis of an indicator refer to Symptoms - Instrument Panel, Gages and Console .

Did the Mechanic check for DTC'S - diagnostic trouble codes in the BCM or insturment cluster ? Did you try a Buick dealer ?

Jul 09, 2017 | 2002 Buick Rendezvous

3 Answers

When i am driving my suzuki ignis (1.3,manual,2001)in a traffic(more than 45 mins)engine starts to miss(check light indicates) and it stops.cant start it for about 10-15 mins


I have a 2001 Suzuki Ignis and I have a similar problem. When I start the engine 5 beeps are heard and the hazard lights turn off and on with each beep. Also after I have been driving for about 45 mins 3 beeps are heard and the hazard lights turn off and on again. However my engine does not stop running. I have asked people about it and they think that it has something to do with a lose wire in the security system? Any help would be greatly appreciated!

Oct 11, 2010 | 2001 Suzuki Swift

Not finding what you are looking for?
2002 Ford E-Series Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...