Question about 1991 Chevrolet S-10 Blazer

1 Answer

Bent A-Arm on a 1991 Chevy S10 Blazer...repair$???

Just need to know how much it would cost to repair a "bent A-Arm"...thinking about buying a 1991 Chevy S10 on craigslist...but need to know what i'm looking at paying for that repair. thanks. also, here's the info in the ad: "NEEDS WORK.
STARTS RIGHT UP AND RUNS GREAT BUT IT HAS A SMALL OIL AND TRANSMISSION LEAK AND THE RADIATOR LEAKS OUT SLOWLY. IT HAS TROUBLE TURNING TO THE LEFT BECAUSE OF A BENT A-ARM.THE ENGINE IS A GOOD CHEVY BLOCK ENGINE AND IT HAS THE ORIGINAL S10 BLAZER RIMS ON IT. THE STARTER IS BRAND NEW AND SO IS THE BATTERY."

is it a good buy at 400 obo?

Posted by on

  • akerockstar May 27, 2009

    thank you...i appreciate your time to help me out with an answer!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,489 Answers

I would guess $500 - $1500 to do this job depending on how much damage was done when the arm was bent.

"SMALL OIL AND TRANSMISSION LEAK AND THE RADIATOR LEAKS OUT SLOWLY." -- the radiator leak could get bad enough to require repair.

I think $400 obo is an okay price, can't get much lower for a vehicle that will get you to the store and back.

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to replace clutch arm cu7z its bented need to know how and where to find paert for a1994 geo tracker


suzuki still sells these parts.
my guess, is the actual upper ,pedal arm broke or bent. as is so common.
it is caused buy not replacing the clutch cable every 100k miles or lubing it. (stripped spline, busted firewall, bent or cracked.)
there are 3 ways.
1: new arm at suzuki (ask for p/n I can tell you)
2: get part off a wrecked kick or tracker
3: pound it straight or weld it.
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

May 16, 2013 | 1991 Geo Tracker

1 Answer

Was rear ended and car frame is visibly bent down. My car is worth maybe 4 to 5 thousand and i dont know if the insurance company is going to consider it totaled or fixable. Its a 2001 Chevy Blazer,


You won't know until you take it to a body shop and get an estimate for repairs.
There may be hidden damage behind the bumper cover too.
The vehicle is a total loss with repairs cost more than 75 percent of replacement value with most insurance companies.

Jan 20, 2013 | 2001 Chevrolet Blazer

3 Answers

1991 Chevy S10 Blazer 4.3 4x4


4170636.jpgThis is all I've got.Hope this helps?

Dec 20, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

IBrake Switch


yes you can, the switch is on the brake pedal arm under the dash, its a bit tricky to get in there, so good luck

Nov 03, 2009 | 2000 Chevrolet Blazer

1 Answer

1991 S10 blazer 4x4 4.3 popping coming from the front


the popping sound is the stabilizer links or the lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with dawn dishwashing liquid and put them back.

Jun 23, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

Need the fuse diagran fo chevy blazer s10 4wd 1991


go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!

Apr 10, 2009 | 1991 Chevrolet S-10 Blazer

2 Answers

Need manual for chevy s10 blazer 1991 4wd. My


You may contact a GM dealer for assitance in getting a manual for that year and model.
I would also recommend getting a good repair manual for that vehicle. The savings for one repair will more than offset the price of the repair book. I use manuals produced by Haynes which can be found in most auto supply stores like Advanced Automotive or Auto Zone.

Apr 10, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

1985 chevy Blazer cranks up, runs rough, then


have you checked, cady, fuel tank, is it getting the right amount of gas and air? plugs and wires, go with general mantinence first then step up. i have a 85 s10 blazer that was a lemon off the lot but has over 300000 on it and it has the same prob i fix it tempurary by flipping the lid on the breather upside down so it gets more air

Mar 12, 2009 | 1985 Chevrolet S-10 Blazer

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...