Question about Hyundai Motor 2003 Elantra

1 Answer

Help plz I have a Hyundai 2003 Elantra that i bought as is. a month later tried ti get the inspection but didnt past come to find out the wireing in the car were not put together right from the guy i bought it from. i think it might have a shortage in the wires. my mechanic said he couldnt fix it. any one no what i should do? n about how much it would cost. thanks!!!

Posted by on

  • blackmalljor May 27, 2009

    thank u so much.. helped a lot.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

If you want to fix it yourself, you can go to http://www.hmaservice.com/ and register. You'll have access to lots of info about your vehicle. If not, take it in to a Hyundai Dealership and have it diagnosed - depending on what's wrong, they'll give you an estimate of repairs (parts & labor + tax).

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 elantra all 4 windows stopped working. checked 30 amp fuse in dash.. was good. checked relays box with fuses in it under hood. Didnt see anything blown. What else could cause all 4 windows to stop...


Wiggle the wires going into the door from the pillar where the door hinges are while trying to put the window up or down if nothing happens then change the master switch.

Feb 28, 2011 | Hyundai Motor 2003 Elantra

3 Answers

Hyundai elantra GT 2003 electrical problem (mirror, gauge, clock


Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Sep 24, 2009 | Hyundai Motor 2003 Elantra

1 Answer

2003 Hyundai ELantra shifts hard sometimes after proceeding thru a stop sign or a red light. My mechanic says my car is fine drived for 20 minutes the noise don't occur. Later in the night the noise is...


is the shifting due to the transmision? or the engine? i had a friend who's car did something simular, diffrent car though and a older model. turns out, it indeed was the fuel pump, when they thought it was the tranny. try some Lucas for the transmission. if that dont help then i would let the mechanic drive it.

Jul 23, 2009 | Hyundai Motor 2003 Elantra

1 Answer

2003 Hyundai Elantra.. Numerous problems with the alarm.....


Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

Jun 27, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Help


I think I responded to your request before. Take it into a Hyundai Dealership and they'll diagnose it give you an estimate of repairs (parts, labor & tax)
Nuff said. OR you could go to http://www.hmaservice.com/ and register (vehicle VIN) then you could check it yourself with the info you would have access to (manuals, wiring diagrams, service bulletins, etc.)

May 29, 2009 | Hyundai Motor 2003 Elantra

1 Answer

2002 sonata code P0121 throttle/pedal position sensor A CKT RNG


You need to check the wiring between the ECM/PCM/ECU and the sensor to ensure the sensor is getting the voltage that it should be as well as the voltage it should be putting out. Also check the sensor itself you may have bought a bad sensor. Good luck to you. Thanks for using FixYa!

Sincerely,

JC

Jan 03, 2009 | 2000 Hyundai Elantra

1 Answer

WIPER ARMS WILLN OT MOVE


pinion gear or gearbox damaged. Replace.

Dec 26, 2008 | Hyundai Motor 2003 Elantra

Not finding what you are looking for?
Hyundai Motor 2003 Elantra Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...