Question about 1994 Honda Civic

1 Answer

Trying to replace ignition, trying to remove the old ignition.

My car was stolen and recovered, how ever my ignition is busted. i am trying to replace the ignition on my 1994 honda civic dx.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

This is not hard to do, first remove all the steering column plastic, then you'll see two bolts with no heads on them. Take a chisel and a hammer and loosen the bolts, counterclockwise. Install the same way except the new lock assembly will have reverse hex screws you torque down until the heads break off. good luck.

Posted on May 27, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Car was stolen & recovered. A key& remote were not recovered. Can I deactivate the remote & replace it with a different one?

Boyd, the dealer can change ignition and fobs/remotes and the program to differ from original.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Apr 17, 2016 | 2005 Nissan Maxima

1 Answer

My 2004 ford PU was stolen when I got it back they had bust the ignition and used a screw driver to start it. Can I bypass the ignition and if so how? Thank you

No you do it properly and have the ignition barrel replaced together with any other broken parts. It's not a major exercise and it can be done for you in a day when the parts are available.

Jan 10, 2016 | Ford Cars & Trucks

1 Answer

My ninety nine Acura Cl was stolen and ignition switch was damaged so I bought a new one and it came with three keys two black and one gray key after installation the car will turnover but wont start...

Question?. do you still have the original keys. The reason that I ask is you have 2 options, take the car to a dealer (towed) and they can reset the computer. Option 2 is easier, take your original key and your new ignition (obviously you know how to remove the barrel because you have changed it), take both to a good locksmith and have your new lock recoded to your old key (take the keys so they can remove the barrell), this will allow you to use your old key and your computer will forget that it was stolen The option is yours
Merry Christmas

Dec 14, 2013 | Cars & Trucks

1 Answer

Will not start after installing new battery . Old battery was stolen from car . All fuses OK. Fuel pump is OK. Spark appears a bit week when plug wire tested to earth while engine is cranked .Could it be...

if the battery was removed wrong it could have damaged the ecu. the ecu does not like the positive lead removing first. even without the ignition being on a little power still goes into the ecu. you might be able to repair the ecu some ecu's in the old type ecus had a fuse on the ecu board it could of just blown this.

Jul 20, 2017 | 1990 Toyota Corolla

1 Answer

Broken ignition switch

you can purchase a complete column from a salvage yard make sure it comes with a key.Usually its cheaper that way than trying to repair your old column. Hope this helps

Mar 27, 2010 | 1998 Ford Windstar

1 Answer

My car was stolen and they busted ignition and

check your fuses they probably shorted something blowing your fuses, if not that check plug in for light switch in back it may have got pulled or by coincidence the light switch may have gone bad. when you pull the switch do your dash lights come on if not it is in the switch

Nov 25, 2009 | 1994 Saturn Sl

1 Answer

Ignition key busted off in the ignition.Ignition

dont even try it,,, you will never get it working again,
take it into a lock smith they will even cut you a new kye at the same time,,,
but if you realy fell brave try long knows pliers to pull out the stub end

Nov 15, 2009 | 1999 Land Rover Discovery

1 Answer

My keys was stolen in robbery so i replaced the old key ignition with new one but new keys do not have chip and car won''t start what can i do p.s lost the old ignition

You must get a new ignition at dealer, then your dealer will have to program the key it will never start without that chip..

Jun 06, 2009 | 1994 Oldsmobile 88

1 Answer

99 Plymouth breeze Ignition cylinder

put key in and turn to aux position then push lock pin down and barrel comes key cut it off

Dec 01, 2008 | 1999 Plymouth Breeze

Not finding what you are looking for?
1994 Honda Civic Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides