Question about 2005 Chevrolet Equinox

1 Answer

Need to replace driveshaft carrier bearing, will not come off transmission end.

How to remove drive shaft on 2005 Equinox

Posted by on

  • Anonymous Mar 28, 2014

    Carrier bearing went out fixed it now why is mytrooper ls manual transmission grinding really bad even in neutral and while driving

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

First mark the relationship of the two yokes and then remove the universal joint. Now that's done remove the retainer clip from the top of the slip yoke and gently tap the slip yoke out being careful not to damage the splines on the shaft. the bearing that ins on there is pressed in so (A) you can bring it to someone with a press or (B) use a gear/ pulley puller. If you attempt this take your time and have patience don't break anything and think safety first.

Posted on Jan 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i check allowable movement in rear drive shaft differential on a 2005 chevy equinox


There is no "cheking"to be done other than what you have done already.The movement,ANY movement,only means the universal joint is shot and needs replaced.I'm sure you've noticed a steady vibration.It's coming from bad U-joint.Replace it.

Jun 22, 2014 | 2005 Chevrolet Equinox

1 Answer

Drive shaft/how to remove from auto


if it is front wheel drive pulled the tire and hub assembly off should pop right out if it is rear wheel drive there are nuts and bolts holding it in really easy to do should be four on the front and four on the back in a rear wheel drive

Feb 08, 2014 | 2005 Chevrolet Equinox

1 Answer

How to remove drive shaft from auto


you have to pull your tire and hub assembly off then it should pop right out

Feb 08, 2014 | 2005 Chevrolet Equinox

1 Answer

2007 CHEVY EQUINOX DRIVE SHAFT REMOVAL


I own an auto repair shop and just replaced a very good customer's driveshaft in an a 2007 Equinox. The center u-joint was bad and due to the way GM manufactured this particular shaft the u-joint is not serviceable. So instead of a $15. u-joint and some labor we bought a $545. drive-shaft and my customer really got the shaft. Replacing the driveshaft is not a diy job. The cv joint that bolts to the transmission is tricky. Maybe Obama can GIVE them some more money. As far as I am concerned Ford is the only USA manufacturer building agood vehicle

May 12, 2012 | 2005 Chevrolet Equinox

1 Answer

2005 EQUINOX AWD HAS A BAD SHAKE VIBRATION WOBLE IN IT WHEN ACCELERATING BETWEEN 35 AND 55 MPH GOES AWAY WHEN YOU LET OFF GAS, TOOK REAR DRIVE SHAFT OUT AND DROVE IT, STILL HAD SHAKE/WOBLE/VIBRATION


COULD HAVE LOW AND HIGH SPOTS IN THE BRAKE ROTORS.CHECK TIRES FOR DEFECTS.COULD NEED FRONT END ALIGNMENT OR BAD WHEEL BEARINGS CAUSE WHEELS VIBRATION.

Jun 09, 2011 | 2005 Chevrolet Equinox

1 Answer

How do i get the rear drive shaft off?


Remove the four bolts at the rear diff, then pop shaft off the diff and then slide it out of transfer case if its four wheel drive if it two wheel drive slide out of trany. hope this helps.

Sep 05, 2010 | 2005 Chevrolet Equinox

1 Answer

Tear in cv boot on 2005 chevrolet equinox


You will have to get the booth replaced, but this meens stripping the drive shaft.

Aug 14, 2010 | 2005 Chevrolet Equinox

Not finding what you are looking for?
2005 Chevrolet Equinox Logo

4,340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...