Question about 2006 Mitsubishi Outlander
Brake pads were shot, I replaced the rotor. Had to beat hard to get it off because the e-brake shoes were rusted. I got the pads and rotor replaced but the noise was still there. I removed the e-brake on that side just to see if that was the cause. The noise still exists and the rotor hub is hot. Is there a bearing back there that could be shot?
There is a race bearing on the back side of the rotor. If you haven't replaced it, I would strongly recommend it. You should change those out every time you change your rotors. Most new rotors come with new race bearings, if it did come with a new one (and it isn't shot yet), pull it out and pack it with grease. Wear latex gloves, put a pile of general purpose grease in your hand, and start stuffing the grease into the bearing until it comes out the other side.
Posted on May 27, 2009
Maybe u should change the rear axle differential
Posted on Feb 04, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 16, 2015 | 2008 Mitsubishi Endeavor LS
Jan 14, 2015 | 2003 Hyundai Santa Fe
Oct 24, 2014 | 2006 Chrysler Town and Country
Aug 04, 2017 | 2006 Ford Freestyle
Feb 01, 2011 | 2006 Chevrolet Silverado
Sep 25, 2009 | 2003 Mitsubishi Outlander
Sep 09, 2009 | 2006 Kia Sedona
Jun 12, 2009 | 2003 Mitsubishi Outlander
904 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: