Question about 2004 Toyota Sienna

1 Answer

Mirror popped loose on my 2004 Sienna

I just need to know how to pop the glass mirror back into place on my 2004 Toyota Sienna passenger's mirror. Everything else is intact. Can I do this without having to remove the door panel?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 351 Answers

If you push the glass gently to either the left or right you should be able to see a couple of screws that hold all the mirror working parts in place.
As all these parts are made from plastic it is possible that a plastic part has broken and allowed the mirror to come out
Hope this has helped

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Side mirror glass popped off when i bumped the garage...i just want to pop it back on


knowing the car maker would help answer that

if its and adjustable mirror
should have clips
would require firm pressure to refit
no guarantee the mirror part or housing or clips wont break

Oct 17, 2016 | Cars & Trucks

1 Answer

Remove glass from outside car mirror


you should be able to get a grip on the outside edge of the mirror. from there it is a matter of carefully prying it until the clips release. It may also have the center ball and socket which can be quite stubborn at times. good luck!

Mar 17, 2015 | 2000 Toyota Sienna

2 Answers

I have Toyota sienna CE 6cy of 2007. The passenger side mirror is broken and I want to buy another one to change. When I go to web to buy it is asking me if it is heated or not. I am not sure if it is...


call Toyota and ask thim you might need to get the vin# they should give you the info,,,also if you have CERTI FITT near where you live they are the cheepest place,,,,,,IF IT IS ONLY THE MIRROWER THAT IS BROKEN...you can pull the rest of the glass off the frame go to Autozone or Orileys they carry replacement mirrower's for about 12.oo to 18.oo

Dec 23, 2010 | 2007 Toyota Sienna

1 Answer

I have a 2003 volkswagen jetta. i need to remove the glass on the front drivers side and front passenger side doors and replace it with new glass.after i remove the door panel how do i do this?


The panels have 3 t20 torx screws on the bottom and one philips head near the mirror. Under pull handles there are 3 philips on the drivers and 2 philips on the passengers sides. Pull the panels from the bottom and lift the panels up. There are 2 black rubber plugs in each door, pop each plug out and the glass is held in place to the clips on each side with either a 10 mm bolt or t30 torx bolt. Move the glass to the point where you can see the bolts, loosen, but don't remove the bolts. Once loose, you can pull the glass loose. Once loose, lower the window a bit, angle the rear of the glass up and pull it out. The glass may be epoxied in place, as VW had a problem with windows coming loose. If so, try to pop the rubber in the clamp loose (above the bolts you see through the holes) and reinstall it with the window removed.

Dec 22, 2010 | 2003 Volkswagen Jetta TDI

1 Answer

Need to get a "backing


I need the same thing for a 2004 Explorer Sportrac. I can't find the "backing plate" either. Only the glass. No junkyard will sell me only the plate and glass. I did find a complete mirror assembly (housing, gasket, glass) for $37.89. This includes shipping. I got it from partsgeek.com. It just arrived today and looks to be perfect. I have not installed it yet. Hope this helps you out.

Nov 06, 2010 | Toyota Corolla Cars & Trucks

1 Answer

Describe how to change the passenger mirror on a 2007 Toyota Sien


Hi, First remove the door panel. (The connector for the mirror is behind the panel just to the left of the door handle.) The arm rest cover pops off by gently prying upward at the corners near the door panel and along the outer edge of the arm rest. Then remove the 2 screws. Remove the screw that holds the door handle bezel on. Remove the little plastic plug to the left of the door handle as well. This reveals yet another screw to remove. Now you can gently pull the door panel away from the door. The little plastic clips will pop out of the door. If they come away from the door panel they easily fit back in place in the metal retainers built into the door panel. You can now disconnect the connector and remove the 3 10mm mirror bolts.
With respect to the door handle bezel on the inside of the door, to remove it you must pull/slide the bezel away from the door hinge. It should move an 1/8 to 1/4 inch. There is a little tab that hooks inside the door handle mechanism and two small holes, top and bottom, that slip over little pegs on the mechanism. I broke this tab while removing the bezel on my car. This was the most difficult part, on my car, to remove.
Take care

Jul 23, 2010 | 2007 Toyota Sienna

1 Answer

How to change passenger side view mirror


there should be a cover over it on the interior, pop that off and you should see thebolts holding it on. You can't just replace the glass, you'll need the whole assembly

Feb 12, 2010 | 2004 Toyota RAV4

1 Answer

Passenger side mirror popped out of housing, need to reattach


According to the factory service manual you need to first connect the mirror defogger terminals (if equipped). Next, line up the tab clips on the back of the mirror that fit into the slots of the mirror mount. Push in the bottom of the mirror fully and then use a cloth covered flat-tip screwdriver and place it between the top of the mirror and the mirror housing and press downward. This should engage the tab clips into their corresponding slots in the mount. When finished, check to see that the mirror adjusts properly. Sounds easy but I'll bet its tricky. I haven't done this repair before so write back with a comment and less us all know how it went.

Apr 24, 2009 | 2004 Honda Odyssey

3 Answers

Need to replace the passenger side mirror,glass only. does anybody know if the plastic backing plate the mirror is attached to pops out of the holder? If it does, it would make it easier to fit the new...


Just replaced the mirror glass myself. Don't have all the answers but can tell you this much.

The passenger side mirror on my 2004 Odyssey was hit by a projectile which caromed off the upper door frame. Left standing was a functional mirror base (motor driven part which has four, short, horizontally mounted rods) still attached to the mirror shroud and a separate assembly of the mirror glass and plastic mount.

I purchased the mirror glass alone online from a Honda dealer, removed the old mirror glass from the mount, and mounted the new mirror to the mount. To do this, look at the tabs which hold the mirror to the mount, and slide the mirror across the mount in the obvious direction. It will take some force. I had the benefit of having the mount/mirror glass blown out of the mirror shroud so it wasn't too difficult. If the broken mirror is still mounted to the mount and inside the shroud, push the bottom of the mirror inward so the top edge of the mirror can clear the top of the shroud. Then pull up on the mirror glass to slide it off the mount. This will take some force but fortunately, the mirror glass is already broken so you don't have to be gentle. Wear gloves or protect you hands while doing this.

Reverse the process for install the new mirror glass.

Now for my key tip. I had to remount the plastic mount/mirror glass assembly onto the motorized mirror base. I could see that it snapped in, with proper alignment, by pushing straight in. I applied quite a bit of force and simply could not get it to snap in place. My solution, was to put the assembly in a 200F oven for 15 minutes to heat the plastic to make it more flexible. Using paper towels to handle to avoid burns, I aligned the closures with the four, small, horizontally mounted rods, and with a moderate amount of force, the assembly snapped into place.

Hope this makes sense. I believe most people will only have broken mirror glass and not have the plastic mount with mirror glass come off the motorized base as I did.

Apr 19, 2009 | 2004 Honda Odyssey

3 Answers

Replacing RH Side view mirror on a 2006 Toyota Sienna


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jul 29, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
2004 Toyota Sienna Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8725 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...