Question about 2002 Jaguar S-Type

1 Answer

2002 jaguar s type driver's side rear tire is stuck.

1 lug nut will come off, other 4 spin in place and won't come off. Several people have tried, and still no luck.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Looks like you will have to get another rim, and have someone blow off the nuts with a tourch. all studs will have to be replaced

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Montero Sport removing the rear passenger tire has a flat


Hi,

Changing the wheel/tire on this vehicle is not significantly different from any other car or truck.

You will need to first pop off the center cap if you have one so that you have a clear shot at the wheel lugs.
Use your tire iron or a 21mm socket and breaker bar to loosen all lug nuts 1-2 turns.
Place your jack under the vehicle.... if you are using a scissor jack you can use the pinch weld of the body just forward of the rear wheel (the vertical stamped metal rib), or if you have a bottle jack or floor jack you can also lift from the front of the trailing arm or directly below the axle behind the wheel.
Once the wheel is off the ground, remove the lug nuts the rest of the way.

At this point the wheel should come off. If it is frozen on the truck from age/rust, you can use a rubber mallet to strike the back side of the sidewall to help jar it loose. If you do not have a mallet you can kick the inside side wall with your foot, however you do not want to do this if you are using a scissor jack or if you are on uneven ground, so as to avoid knocking the truck off the jack.

With the wheel off you can take it to a shop for dismounting/replacement of the tire; this can not be done without special equipment.

Place the repaired wheel/tire or spare on the truck and tighten the lug nuts finger tight so that the wheel is flush (not tilting).
Lower the jack and remove it.
Use your tire iron or 21mm socket and breaker bar to tighten the lug nuts the rest of the way.

If you are using a spare tire, the tail gate mounted spare is removed by simply taking off the lug nuts holding it on; The under-mounted spare is lowered to the ground by unscrewing the 21mm nut located under the cargo cover in the rear center of the truck. This nut operates a winch which will lower the tire to the ground when turned anti clockwise, and draws it back up to the truck when turned clockwise.

Jun 26, 2017 | Cars & Trucks

1 Answer

Lug nuts on front drivers side pasat 99 stuck


iam totally confused here now please explain what you are trying to do here in plain english with no american terminology like lug ? because this word means a worm you dig up at low tide to go fishing with.

Jan 06, 2013 | 1999 Volkswagen Passat

1 Answer

Changing tire. after lungs r removed is there still a lock on tire to prevent from sliding tire off


GIVE TIRE SIDE WALL SWIFT KICK WITH FOOT TIRE SHOULD COME OFF.IF ALL LUG NUTS BEEN REMOVED.

Sep 04, 2011 | 2002 Jaguar X-Type

2 Answers

Having difficulty changing front drivers side tire on the Jaguar x type 2003. the tire is flat and we cannot seem to remove the tire


If all the lug nuts are removed and the tire will not come off it is frozen onto the hub. This is really common with aluminum wheels. If you can safely support the vehicle so that it will not fall off the jack you can try kicking the backside of the tire. This will work most of the time.

If that doesn't work put the lug nuts on till there just snug and then loosen them 3 or 4 turns. remove the jack and drive the vehicle back and forth until the wheel falls off the hub.

Everyone I work with as well as myself, have at least a four pound plastic deadblow hammer just to remove the wheels that this happens to.

Jan 30, 2011 | 2003 Jaguar X-Type

1 Answer

Deformed lug nut on 2002 jaguar x-type 3.0 (17 inch wheel), deformed with 12 point socket wrench spins now. How to do you remove ?


find one size down socket and extension bar then use hammer carefully but firmly to bray onto lug nut once on use ratchet with a piece of pipe placed over topof ratchet handle for extra leverage and should crack off if not u can buy extraction kit from motorspares shop or you could hit top of nut with chisel to score then take normal wheelnut thread on backwards ie flat edge first ov er-tighten then slacken this should cause it to get a bite of lugnut and loosen both hope this helps

Nov 19, 2010 | 2003 Jaguar X-Type

1 Answer

How do you take the rear wheels off of the 2004 dodge ram 1500


hi, if just taking the rear wheels off the vehicle, you will need a hydraulic jack, or vehicle lift of some kind, jack stands to place under the vehicle if you are using the hydraulic jack. You will also need either a 4 way tire iron, or some combination of a 7/8 in socket and a 1/2 in drive breaker bar, the socket needs to be 1/2 in drive as well. this tools maybe rented from local auto parts stores if you do not have availible. now, the lug nuts(the nuts holding the wheels on) may not be 7/8 inch size, depending on the rim package you have, there will be only five of course though. before you jack up the vehicle, you must break the lug nuts loose. take either the 4-way tire iron, or the breaker bar and use a lot of force and turn counter clockwise with the wheels on the ground, and the vehicle in park, with the parking brake on. break all five lug nuts loose(able to turn easily, by hand if desired) on both sides. then you must locate the vehicle frame underneath, and use the jack on the frame point only, never on the axleshaft or body part, and jack up one side of the vehicle until the wheel hangs freely, and place a jackstand next to the hydrualic jack close to touching the frame. lower the vehicle onto the jackstand and make sure the wheel will hang freely. repeat on the other side until both sides, wheels are hanging freely. then remove the lug nuts with either the tire iron, socket and breaker bar, or by hand. once all lug nuts are reomved, pull the wheels off. that should just about do it, hope i didn't leave anthing out, if putting back on, reverse steps, but hand tighten clockwise until tight against the studs, then lower the vehicle down and tighen each lug nut in a star fashion. make sure to tighten very well, you don't want the rims to fall off while driving. good luck.

Jun 17, 2010 | 2004 Dodge Ram 1500

2 Answers

How do I remove the brake drums


How to Replace a Brake Drum
(DIY Complexity: Moderate / Time: 2.1 hours)

Parts:
1. Brake Drum

Tools:
1. Jack Stand Set
2. Mallet Hammer
3. Flat Head Screwdriver
4. Floor Jack
5. Combination Wrench Set
6. 3/8 in. Drive Ratchet
7. Tire Iron
8. Socket Set

Supplies:
1. Brake Cleaner

Steps:
Step 1 Secure the vehicle on a level surface, making sure the vehicle will not roll or lean when jacked up.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 Remove the rear wheel hub caps (if necessary) to gain access to the lug nuts. Using a tire iron or lug nut wrench, break loose the rear wheel lug nuts but do not remove.
o Tip: Turn the lug nuts counter clockwise to loosen. If the lug nuts are too tight, use a breaker to gain more leverage.

Step 3 Using a floor jack, lift up the rear of the vehicle.
o Tip: Using an aftermarket floor jack, instead of the original equipment (OE) jack, can make the job easier and safer. Verify the condition of the floor jack before use.

Step 4 Secure the vehicle with jack stands on both sides for safety before starting any work. The pinch welds or the frame rails are the two best locations. Do not rely on the jack to hold the vehicle up while working.
o Tip: Try to find a flat, level, and strong surface to put the jack stands.

Step 5 Remove the lug nuts. Remove the rear wheels.

Step 6 Remove the brake drum by pulling it outwards.
o Tip: Make sure the parking brake is released before removing the brake drum.

Step 7 Visually inspect the brake drum for cracking, scoring or grooving. If any of these conditions are found, the brake drum will need to be resurfaced or replaced.

Step 8 Visually inspect the brake shoe linings and drum brake components for damage or wear.

Step 9 Replace worn components if necessary.

Step 10 Install the new or resurfaced brake drum.

Step 11 Reinstall the wheel. Torque the lug nuts to the manufacturer’s specification.

Step 12 Remove the rubber grommet from the backing plate. Insert a screw driver into the slot and turn the star wheel adjuster to adjust the brake shoes out.
o Tip: Turn the star wheel adjuster until you feel a slight drag while spinning the wheel.

Step 13 Road test the vehicle.

Hope this help.

Mar 23, 2010 | 1999 Hyundai Accent

5 Answers

Can not remove lug nut caps 2003 x -type jaguar


I have an 04 xj8. the lug nuts are a good bad example of half baked engineering. the lug nuts are fabricated from ugly steel with an 11/16 hex end. to beautify this, Jaguar overlays the nut end with a stainless steel 3/4 inch cap, crimped to the nut. On top of this, the nut is to be torqued to 90+ ft-lb! The only way to remove the lug nut without damage is with a SIX POINT socket and a breaker bar or an impact wrench. Using a 12 point socket will deform the cap, causing the wrench to spin on the cap and or the cap to spin on the nut itself. If that has happened, it is possible to recover using a 15 oz or thereabouts ball peen hammer and a deep 3/4 inch impact socket (the black ones). Line up the socket to the cap, doing a best guess to where the flats are and give the socket a light blow. Keep trying that until the socket seems to stick on, then hit it harder. Eventually you will find the right point and the socket will go on and reform the cap. Then a breaker bar can remove the cap/nut. New assemblies can be had for about $6 from "partsbin" or "autohausaz".

Apr 11, 2009 | 2003 Jaguar X-Type

1 Answer

I own a 2002 jaguar x-type and i need to know the lug nut or wheel nut size


I believe the size is the measurement from any of the flat sides of the lug nut across to a flat side directly across from it. So to make it easy to measure, just remove one, and I assume it would be measured as metric. An easier way would be what size metric socket fits the lug nuts? That would be the nut size.

Dec 16, 2008 | 2005 Jaguar S-Type

Not finding what you are looking for?
2002 Jaguar S-Type Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...