Question about 2000 Oldsmobile Intrigue

3 Answers

Signal lights work intermittently

When using lever for signal lights when turning, lights sometime don't come on or make a sound ....

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 42 Answers

For an intermittant problem I'd recommend removing the flasher unit -- it is plugged into a socket, so you can just pull it out.

Clean the contact pins on the flasher and replace it in the socket.

That should do the trick.

Posted on May 27, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

Change your flasher fuse, usually located underneath the dash clipped to the steering column or in the fuse box, usually silver and round or yellow/black and rectangular

Posted on May 27, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a 98 and the contacts on the bulb **** try to remove the bulb and clean the contacts its usually the front bulbs

Posted on Jul 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 volvo S70 turn signal


Get a schematic for the car and clean and work every connection in the wiring to your switch. Also chemically clean the innards of your switch(s)

Sep 15, 2017 | Cars & Trucks

1 Answer

No brake, turn signal, or flashers at rear of 2006 chevy express 2500


Sounds like a bad turn signal switch. I bet if you wiggle the turn signal lever while you have your foot on the brake pedal the left and right brake lights ill intermittently work.

Apr 09, 2013 | 2006 Chevrolet Express Cargo

1 Answer

No break lights, high beams, or turn signal lights


Do they work intermittently? Do your low beams go out sometimes when you put on turn signal? Do hazards work sometimes and if you play with switch they work off and on? I just had a problem with headlights would go off if I put on turn signal and if I jiggled the turn lever they would come back on and had trouble with all light working intermittently, brakes, turn and hazard. It was a Turn signal switch problem.The contacts in the switch were bad, all corroded and green when I took it apart. I know you wouldn't think this would affect brake lights but hey all run through this switch because of hazards and high beams. I got a new switch from dealer and all is working great now. Here's a link a link I used for switch replacement instructions. http://www.jeepforum.com/forum/f11/write-up-replace-turn-signal-switch-97-xj-620147/
If it isn't a fuse or wiring issue I would look into the switch.

Apr 02, 2011 | 1997 Jeep Wrangler

1 Answer

2001 Town & country brake lights not working, but the third brake light and tail lights are working. I also just replaced the brake light switch thinking it was the problem, but it wasnt


I think the brake light and turn signal are on the same bulb on these, correct?

If so do the turn signals work?

If they do than I would bet that the turn signal switch itself is the problem. The power for the brake lights is routed through the switch (except for the third brake light that is supplied power directly form the brake switch). The turn signal switch will interrupt power from the brake switch and supply power from the turn signal flasher depending on if the right or left turn signal is engaged.

Sometimes wiggleing the lever or pushing the four way flasher button with the brake pedal depressed will intermittantly cuase the brake lights to work. If this is the case than it is the turn signal switch that is causing the problem.

Feb 11, 2011 | Chrysler Town & Country Cars & Trucks

1 Answer

Left turn signal stops working intermittently. sometimes it begins working again when I jiggle the lever. even this works with less frequency as time passes.


I recommend that you change the relay of the signal light or check the wire of the left signal light.Iin some cases you can find water inside of the signal light case, .

Oct 21, 2010 | 2000 Dodge Caravan

1 Answer

Intermittent wipers don?t work properly, 98 dodge van


Mine was the Body Control Module (BCM). Switched it out (needs to be programmed) and everything was fine.

Sep 14, 2017 | 1998 Dodge Grand Caravan

1 Answer

Turn signal problems on 98 Grand Voyager


Replace the turn signal relay. (daylight running lights and turn signal in one unit) It costs about 50 dollars.

Jun 21, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Intermittent clicking sound


This is a fairly common problem on the '04 Grand Am.  I recently fixed the problem on mine.  The problem is in the contacts inside the multifunction switch which is comprised of the turn signal lever and windshield wiper level.  If you remove the plastic covering around the stearing wheel (simple just a few hex head screws) you can see the multifunction switch directly ontop of the steering column.  Remove the screw holding it in place and disconnect the several wires in the back.  The whole unit will come right out, you can take in your house and fix the rest.  If you open it up - there several screws required to do this - you will see copper contacts where the turn signal lever touches to indicate its position (left right or off).  Clean this off well with a damp paper towel to remove the grease and reapply some dielectric grease to the contacts.  Put everything back together and you should be click-free!  The problem seems to be that over time the contacts wear down and arching can occur between the contacts, thus confusing your turn signal clicker and allowing it to click at random times.  Cleaning it out gets rid of any metal fragments in the grease and the new grease will act to prevent the arching.

Apr 02, 2009 | 2004 Pontiac Grand Am

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...