Question about 1989 Toyota MR2

1 Answer

Easy and best way to replace crank bearings in a toyota mr2 1989

There is no problem just need to know how?

Posted by on

  • its420_us May 11, 2010

    Only way, is to remove the engine from the vehicle.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

If you meen the crankshaft, the engine has to be seperated from the transmission.

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I do to start a Toyota Hiace 5L Engine that won't start with easy start?


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Oct 05, 2016 | Toyota Cars & Trucks

1 Answer

How to replace a front wheel bearing on a 1995 toyota surf


I do not know but I ended up have to get a replacement wheel assembly on my Toyota Corolla. I replaced the wheel bearing it self 3 times in 6 months. Do not know if the assembly was damaged when the inner race was pressed out / in.

Make sure you know what you are doing and use a very reputable machine shop that has experience with Toyota wheel bearings.

Best, Jim

Mar 08, 2011 | Toyota 4Runner Cars & Trucks

1 Answer

Rear wheel bearing replacing


This is a bit of a messy job, but fairly easy. First, you'll want to locate or purchase a repair manual for your vehicle (CHILTON is best). If these are not pressed in, then you can do this at home. If they are, a mechanic will be your best bet unless you know someone with the right tools who can help you, or do this for you.

Visit your local auto parts dealer to determine if these are pressed in, or if they are external (loose fit) bearings.

Please let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

Jun 14, 2010 | 2004 Toyota RAV4

1 Answer

I HAVE A MK2 MR2 WITH A BIG END BEARING NOISE,I HAVE BEEN TOLD ITS A SIMPLE REPAIR, AND CAN BE DONE WITHOUT INVOLVING ENGINE REMOVAL, CAN ANYONE CONFIRM?


Yes and no... The most common problem in the bottom end is with cylinder number 1. It gets oil starved. This is in the 3sgte. Not sure what motor you have. You can change the bearing without taking out the engine....But you will have to drop the sub frame and oil pan. Problem is, is that you dont know if the crank needs reground and or resized. Or if the rod is bad and ovaled. The bearings wont fit.... you can replace the bad bearings.YES! But how long will it last since it wasnt done correctly? Best case. If there is no damage to the crank and rod? Sure it can last a long time with the rite size bearings. But chances are the rod is bad, the crank needs reground/ or its bent it will need machined. good luck

Dec 27, 2009 | 1991 Toyota MR2

2 Answers

1996 Camry, 150k. Engine bearings showing beginning wear-and-tear signs (shards in oil pan). Can these be replaced, or is another engine the only option?


These can be replaced. In a worse case scenario they can be replaced with the engine installed although extensive disassembly is required to include cylinder head removal. You will want to have the Crank turned and all connecting rods and make sure they are done at the same time by the same servicer. This is to ensure that you get the proper Connecting rod and Journal and main bearings.

Aug 28, 2009 | 1996 Toyota Camry

1 Answer

Conrod bearings need to be replaced in the engine that is 3y engine model for hilux and i want to know whether any adjustments needs to be done after installing the bearings


If the bearings need replacing the crankshaft will need grinding. After the crank has been ground you will have to buy suitable main and conrod bearings EG: 10thou undersize.
After fitting new bearings to the reground crank no adjustment is necessary.

Jul 01, 2009 | 1987 Toyota Pickup

2 Answers

Toyota tercel 95 no have spark in the sparplug


If not cranks at all check the battery for charge, starter, fuses
If cranks no start check wiring(replace) , distributor cap (replace), rotor, ignition coil
Please kindly let me know if you need more info
Good Luck

Feb 13, 2009 | 1995 Toyota Tercel

1 Answer

87 22r motor


sounds ok but you cannot tell untill you got it stripped as to the condition, the crank can go oval if it has been like that for a while so check when it's stripped, best of luck

Feb 04, 2009 | 1987 Toyota Pickup

1 Answer

Front brake rotors 1995 toyota 4runner


If you have 6 bolts going around the center (manual lock in/lock out) hub, you are going to be there a while. The center hub needs to come off, and ALL of the internal wheel bearings need to come out. The whole locking hub must be removed in order get the rotor off. This is NOT an easy job, and you need a special tool to loosen/tightem the wheel bearings. Figure 2 hrs per side if you have all of the proper tools & skill level.

Sep 27, 2008 | 1995 Toyota 4Runner

1 Answer

Wheel bearing


HI, For replace the front wheel bearing. on a toyota corolla 03
You need a hydrualic bench.
Because they goin pressed.
I recomend go to a repair shop, is not easy.
It's take about 2 hour to do. with the right tools.

Jun 28, 2008 | 2003 Toyota Corolla

Not finding what you are looking for?
1989 Toyota MR2 Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...