Question about 1998 Ford Windstar

1 Answer

DIAGRAM HOW TO REMOVE FUEL PUMP FROM TANK WINDSTAR 98

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 500 Answers

I can't give you a diagram... but to get thr fuel pump out of the tank, there is a lock ring that holds the pump in, to remove the ring use a BRASS punch and a hammer to turn the ring counterclockwise. you will see some tabs that stickstrait up in the air- you can use those to turn the ring. remove the ring and the pump may have to twist to the left or right- but most likely will pull right out.

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change out a fuel pump on 1999 windstar van


A diagram, don't think so, or it won't help

You remove a couple fuel tank straps & drop the
tank down & remove the pump from the top

If you find that a challenge have a repair shop do it

Go to You Tube Video to watch any fuel tank removal,
if you have no idea of what is required

It can be done at home & I have done several, but it is not fun

Mar 05, 2013 | 1999 Ford Windstar

1 Answer

My 98 ford windstar keeps dying while im driving.I know it is an electrical problem.A lot of people keep thinking its my fuel pump but i don't think it is .I drive my car only to local areas just as...


The fuel pump fuse blowing is an indication of the fuel pump wires may be shorted inside the tank.
If you drop the tank and remove the module, you may find the insulation burned off some of the pump wires.

Prob a good idea to take it in. If it is happening to your model, it may be a re occurring problem for that model and mechanics may have seen it before.

Sep 23, 2011 | 1998 Ford Windstar

2 Answers

I need to know how many fuel pumps that a 1998 ford windstar has please?


Hi, the 1998 Ford Windstar has only one fuel pump which is located in he fuel tank. You have to bring down the fuel tank from the cAR, Once the tank is removed, you can remove the fuel pump lock ring on top of the tank. It screws off counterclockwise......

Jul 04, 2011 | Ford Windstar Cars & Trucks

2 Answers

I need change the fuel pump


Hi, The fuel pump is in the tank. You will have to remove the tank to get at it. Good luck

Jun 21, 2011 | 1995 Ford Windstar

2 Answers

Ford windstar 98 gl 3.8


would have thought so ,but it could have an electronic overload sensor though ,

Mar 11, 2010 | 1998 Ford Windstar

3 Answers

The fuel gage doesn't work can anyone tell us where the fuel sensor is locate at on a 98 windstar.


It's located in the gas tank with the fuel pump. Part call sending unit.Hope this was helpful,good luck

Jan 21, 2010 | 1998 Ford Windstar

1 Answer

98 windstar replaced fuel pump still won t start


u may need some fuel tank cleaning, rust may be clogging the fuel line thats why the fuel cant get thru, change the fuel filters too. hope this helps

Jul 03, 2009 | 1998 Ford Windstar

1 Answer

Remove fuel pump from tank ford windstar 98


To gain access to the fuel pump, it is necessary to remove the fuel tank.
  1. Depressurize the fuel system and remove the fuel tank from the vehicle.
  2. Remove any dirt that has accumulated around the fuel pump module attaching flange, to prevent it from entering the tank during service.
  3. Turn the fuel pump module locking ring counterclockwise using a locking ring removal tool or a brass drift and remove the locking ring.
  4. Remove the fuel pump module.
  5. Remove the seal gasket and discard it.

To install:
  1. Put a light coating of grease on a new seal ring to hold it in place during assembly. Install it in fuel tank ring groove.
  2. Insert the fuel pump module into the fuel tank, then secure it in place with the locking ring. Tighten the ring until secure.
  3. Install the tank in the vehicle.
  4. Install a minimum of 10 gallons of fuel and check for leaks.
  5. Install a pressure gauge on the throttle body valve and turn the ignition ON for 3 seconds. Turn the key OFF , then repeat the key cycle five to ten times until the pressure gauge shows at least 30 psi.
  6. Check for fuel leaks at the fittings.
  7. Remove the pressure gauge.
  8. Start the engine and check for fuel leaks.

May 26, 2009 | 1998 Ford Windstar

2 Answers

Need instructions on changing fuel pump in a 2000 ford windstar


Tank—Fuel Removal
ani_caut.gif WARNING: Do not smoke, carry lighted tobacco or an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may ignite, resulting in possible personal injury.
ani_caut.gif WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before servicing or disconnecting any of the fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel causing personal injury or a fire hazard.
NOTE: The fuel tank comes equipped with a composite protective shield mounted with the support straps on the right side of the fuel tank. Make sure the protective shield is installed correctly whenever the fuel tank is installed.
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-00.
  1. Relieve the fuel pressure. For additional information, refer to Section 310-00.
  1. Drain the fuel tank. For additional information, refer to Section 310-00.
  1. Raise and support the vehicle. For additional information, refer to Section 100-02.
  1. Remove the fuel tank filler pipe hoses.
    • Remove the clamps.
    av1551a.gif
  1. Disconnect the fuel pump connector.
    av1552a.gif
  1. Disconnect the tank connections:
    1. Disconnect the fuel lines. For additional information, refer to Section 310-00.
    1. Disconnect the vapor tube fitting. For additional information, refer to Section 310-00.
    av1553a.gif
  1. Remove the center fuel tank strap bolt and remove the support strap.
    av1554a.gif
  1. Position a safety support under the fuel tank.
  1. NOTE: Safety support not shown for clarity.
    Remove the fuel tank support strap bolts.
    av1556a.gif
  1. Partially lower the fuel tank while swinging the fuel tank support straps away from the fuel tank. Remove the straps and lower the fuel tank.
Installation
  1. To install, reverse the removal procedure.
    av1557a.gif
    av1555a.gif
    Module—Fuel Delivery
    Special Tool(s) st1698b.gif Fuel Sender Wrench
    310-069 Removal
    1. Remove the fuel tank (9002). For additional information, refer to Tank—Fuel in this section.
    1. Clean the area around the fuel pump mounting flange.
    1. Remove the fuel module connections:
      1. Disconnect the fuel tank pressure sensor electrical connector.
      1. Disconnect the fuel fittings. For additional information, refer to Section 310-00.
      av1559a.gif
    1. If repair or installation of new fuel lines or a new electrical harness is necessary, remove the fuel lines or harness from the fuel tank retaining clips and remove the appropriate assembly.
      av1560a.gif
    1. Using the special tool, remove the fuel module retaining ring.
      a0023621.gif
    1. ani_caut.gif CAUTION: The fuel delivery module must be handled carefully to avoid damage to the float arm and filter.
      Remove the fuel delivery module from the fuel tank.
    Installation
    1. NOTE: Make sure that the areas around the fuel delivery mounting area and the fuel delivery module flange are clean.
      NOTE: When installing the fuel delivery module, make sure to align locator tabs on the fuel tank mounting flange.
      To install, reverse the removal procedure.
      av1563a.gif
      a0023620.gif

May 26, 2009 | 2000 Ford Windstar

Not finding what you are looking for?
1998 Ford Windstar Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...