Question about 1997 Chevrolet Cavalier

1 Answer

1997 Checy wiper issues

When i turn my wiper blades on they will go up and down. When turning the wipers off they will go up, down and up and then stop. They will not go back down? Any have any ideas on what is wrong?

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 76,691 Answers

There is a circuit inside the wiper motor called the park circuit, it is what parks the wiper blades in the proper position on the windshield, it is defective. on your car it is park of the wiper motor assembly.

Posted on May 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to have 'step-by-step' instructions for replacing the driver side windshield wiper arm on my 2000 Ford Explorer. Can you help me with this?


  • Turn your wipers off, using the stalk on the left side of your steering column. Turn your ignition off and remove the key.

  • 2

    Pull the wiper blade up to lift it to the service position. Pull the front part of the blade down to position it at an angle.

  • 3

    Pull back the lock pin on the center part of the wiper blade (where it connects to the wiper arm). This unlocks the blade from the wiper arm.

  • 4

    Grasp the blade on each side and pull it down (away from the extended wiper arm) to release it from the "U" clip.

  • 5

    Repeat the process for the other wiper blade, if desired. Removing the driver's side and passenger's side wiper blade is the same.

  • 6

    Install the new wiper blade. Open the lock pin on the new blade, and then insert it into the wiper arm "U" clip. Close the lock pin and lower the wiper blade to its normal position.

  • Jan 29, 2011 | Ford Explorer Cars & Trucks

    1 Answer

    I need to adjust the wiper arm on a 1997 suburban, it hits the side of the window.


    Wiper Arm & Blade (Front) Removal & Installation Wiper Blade To Remove:
    1. Turn ignition switch to ACCY position.
    2. Turn wiper switch to PULSE position and turn ignition OFF when wipers are stopped in the innerwipe position.
    3. Push the wiper blade clip button IN and remove wiper blade from wiper arm.
    To Install:
    1. Insert wiper arm hook through opening in wiper blade.
    2. Place wiper blade pivot in the inside radius of wiper arm hook.
    3. Pull on wiper blade pivot into hook until it locks into place.
    4. Check wipers for proper operation.
    Wiper Arm To Remove:
    NOTE: Mark position of wiper blade on windshield to ensure proper position upon reassembly.
    1. Remove washer hose.
    2. Lift wiper arm from windshield and use a screwdriver to disengage retaining latch.
    3. Remove wiper arm from shaft.
    To Install:
    1. Place wiper arm on shaft so that wiper arm aligns with marks placed on windshield.
    2. Press arm assembly on shaft and push retaining latch IN.
    3. Connect washer hose.
    4. Remove windshield markings and check wipers for proper operation.
    prev.gif next.gif

    Oct 26, 2010 | Chevrolet Suburban 1500 Cars & Trucks

    1 Answer

    I cant figure out how to change my windshield wiper blades on 2001 ford ranger


    How to Replace Wiper Blades Guide (Typical):
    Potential tools needed to replace wiper blades:
    • Flat blade screwdriver (small)
    • Small nosed pliers
    • Latex or vinyl gloves
    • Safety goggles
    To replace wiper blades theactual action of replacing the blade is no big deal, it's the locationof the blade down below the hood that can make it difficult though.Sometimes it helps to open the hood to gain access to the wiper blades.Other times it is helpful if the wiper blade is somewhere in the motionline of wiper action. The trick is to get the wiper to stop somewherein the wiper arc. Turn the wipers to the on position and allow thewipers to start, and then shut the key off when the wiper has arrivedin a desirable position on the windshield. To replace your wiper bladesplease follow the step by step instruction below. Also, watch the How to replace wiper blades video below to gain additional information. The method in which the wiper blades are attached will vary slightly.
    • Step 1: With the hood closed, turn the wiperson, when the wipers are in the middle of their arc turn the key to theoff position. (Note: if this can't be done because of wiper conditionand you want to avoid scratching the windshield please open your hoodto gain access)
    • Step 2: Locate the mounting clips at the top pivot on the wiper blade
    • Step 3: Release the clip and remove the wiper arm
    • Step 4: Match the size of the old blade against the new blade to ensure proper fit and operation
    • Step 5: Reinstall the new wiper blade and recheck wiper operation

    Common Problems:
    • Make sure the wiper blades are the same size as the original blades.
    • When replacing wiper blades not getting the blade onthe mounting pin completely allowing the wiper arm to become dislodgedand possibly causing damage to the windshield.
    • Using wiper blades after the blade has failed permanently damaging the windshield by craving scratches in the wiper arc.
    • Wiper blade can create a chattering noise when theblade is not properly balanced allowing the blade to "flop" back andforth as the wiper direction changes.

    I hope help you with this (remember rated this help) Good luck.

    Sep 16, 2009 | 2001 Ford Ranger Regular Cab

    2 Answers

    How do I remove front wiper blades to replace with new ones on my 2006 nissan quest


    How to Replace Wiper Blades Guide:
    Potential tools needed to replace wiper blades:
    • Flat blade screwdriver (small)
    • Small nosed pliers
    • Latex or vinyl gloves
    • Safety goggles
    To replace wiper blades the actual action of replacing the blade is no big deal, it's the location of the blade down below the hood that can make it difficult though. Sometimes it helps to open the hood to gain access to the wiper blades. Other times it is helpful if the wiper blade is somewhere in the motion line of wiper action. The trick is to get the wiper to stop somewhere in the wiper arc. Turn the wipers to the on position and allow the wipers to start, and then shut the key off when the wiper has arrived in a desirable position on the windshield. To replace your wiper blades please follow the step by step instruction below. Also, watch the How to replace wiper blades video below to gain additional information. The method in which the wiper blades are attached will vary slightly.
    • Step 1: With the hood closed, turn the wipers on, when the wipers are in the middle of their arc turn the key to the off position. (Note: if this can't be done because of wiper condition and you want to avoid scratching the windshield please open your hood to gain access)
    • Step 2: Locate the mounting clips at the top pivot on the wiper blade
    • Step 3: Release the clip and remove the wiper arm
    • Step 4: Match the size of the old blade against the new blade to ensure proper fit and operation
    • Step 5: Reinstall the new wiper blade and recheck wiper operation

    Common Problems:
    • Make sure the wiper blades are the same size as the original blades.
    • When replacing wiper blades not getting the blade on the mounting pin completely allowing the wiper arm to become dislodged and possibly causing damage to the windshield.
    • Using wiper blades after the blade has failed permanently damaging the windshield by craving scratches in the wiper arc.
    • Wiper blade can create a chattering noise when the blade is not properly balanced allowing the blade to "flop" back and forth as the wiper direction changes.

    I hope help you with this (remember rated this help) Good luck.

    Sep 14, 2009 | 2006 Nissan Quest

    1 Answer

    Putting on wind shield wipe for a nissian maxima 97


    in the center of the wiper there is a little plastic, black piece. turn the wiper blade so that blade and the wiper arm make a "T". there is a tab on that black plastic piece that you have to push in, and at the same time you have to push the wiper blade down. easy

    Jun 19, 2009 | 1997 Nissan Maxima

    1 Answer

    Chevy cavalier 1997 wiper issues


    wiper switch need new one or a new relay switch

    May 26, 2009 | 1997 Chevrolet Cavalier

    1 Answer

    How to replace wiper toyota camry


    go too your nearest auto zone and ask for wiper blades for a toyota camry and now got too your car pick up the mechnical arms then turn the upside down now u pull the rubber squeege out then relpace with the new wiper.

    Feb 28, 2009 | 1997 Acura TL Series

    2 Answers

    Rear wiper blades


    No...blade comes off end of arm... If in doubt, most "supermarket" style parts outlets will put it on for free.

    Feb 09, 2009 | 1997 Toyota 4Runner

    1 Answer

    I changed the wiper motor out.  They worked without the blades on, but after installing the blades they tried to move down toward the hood.  I think the motor still works but it seems the shafts are just...


    you may of fitted the blades when the wiper motor wasnt in park

    ok remove wiper arms turn ignition on turn on wipers then turn of by wiper swicth not key motor will stop in park position fit wiper arms in positon try and your done

    Jan 08, 2009 | 1997 Acura TL Series

    1 Answer

    04 dodge ram 1500 wiper arm goes down before going up


    remove wiper arms at the shaft, right at the cowl. each will have a nut on them but it is covered by a piece of plastic that will snap up for access. take nuts off and remove wiper assembly. turn key on turn wipers on make sure shafts turn when on, then turn off the shafts to stop in park position. then reinstall wiper assemblies in their park position .

    Dec 28, 2008 | 2004 Dodge Ram 1500

    Not finding what you are looking for?
    1997 Chevrolet Cavalier Logo

    Related Topics:

    323 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76682 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8531 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...