Question about 1995 Oldsmobile Cutlass Ciera

2 Answers

Need l head bolt for cutlass ciera. l998 - 1995 Oldsmobile Cutlass Ciera

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 35 Answers

Your local auto parts dealer can also supply bolt as well. You may have to purchase a set of bolts as they may not sell them seperaretly. I recently purchased a set for my 95 ciera for $35-40. It is extreamly important to follow the torque specification and sequence in which the fasteners are tightened. It may be a torque plus angle specification, i.e. torque to 65 lb-ft and turn an additional 90 degrees (Example) it is extreamly important to follow these torque instrutions to achieve proper clampload in hed bolt. Also, on the top of the bolt will be markings 10.9 or 11.9, make sure the bolt your are replacing has the same numbers. This is the strenght of the bolt, color should be similar as well, silver or black. ( fasteners 101). You could also check a local bolt wholesaler too.

Posted on May 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

Go to your local GM dealer and ask for the head bolt you need. They will supply it for you

Posted on May 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you release tension from the serpentine belt to change water pump on a 89 oldsmobile cutlass ciera?

In the middle of the idler pulley/tensioner, there is a bolt head (I think it is a 13 or 15mm). Use a wrench or socket to turn it away from the belt, this will release the tension on the belt and allow you to remove the belt. Be careful, it is spring loaded....

Oct 02, 2013 | 1994 Oldsmobile Cutlass Ciera

2 Answers

Do you know where the 2 bolts are on a starter for a 94 olds cutlass ciera s?


Jul 08, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How do I access the low beam headlight bulb on a 1995 Olds Cutlass Ciera?

remove side marker lamp 3 screws #15 torx head
remove grill 5 #15 torx head screws
now remove the headlamp 4 10 milimeter bolts

Jun 02, 2010 | 1995 Oldsmobile Cutlass Ciera

1 Answer

94' Cutlass Ciera S needs engine, have 92 Buick Century engine.

as long as they are the same size and type of motor the mounts will be the same as long as with the trans bolt pattern.

May 19, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

I need to replace a dead battery on an '89 Cutlass Ciera.

No's just a couple of bolts to do it ...good luck

Jan 03, 2010 | 1989 Oldsmobile Cutlass Ciera

1 Answer

How do I change the oil pan gasket on a 1990 olds. cutlass ciera(International Series).

you will have to un bolt the front engine mount raise the engine and then you may be able to get to the pan bolts but if you're not mecanically inclined you need to consult your nearest dealership

Oct 04, 2009 | 1990 Oldsmobile Cutlass Ciera

1 Answer

1994 old cutlass ciera 3100 blown head gasket.

Get a Chilton's book on the car. It will take you thru the whole job, and give you the torque specs for putting it back together. You will need a torque wrench, foot pounds, and a good socket set.

May 04, 2009 | 1994 Oldsmobile Cutlass Ciera

1 Answer

1995 Oldsmobile Cutlass Ciera SL 2.2 head bolts torque and sequence

you have long bolts and short bolts, long bolts go in positions 1,4,5,8,9 - short bolts remaining positions, all long bolts go in back of engine, toward fire wall or front of dash, those are positions starting at passenger side to drivers side, 8,4,1,5,9, so 1 is in the center position, 9 on drivers side. short bolts in front, positions passenger side 7, 3, 2, 6,10, stud is in position 10. Tighten bolts in sequence, starting at 1, long bolts get 32Nm, short bolts get 29Nm, next pass torque all to 58NM, than final pass add an angle of 100 degrees, little more than 1/4 turn with wrench. Bolts should have 11.9 on head, the tightening specification is called a torque plus angle to yield, that is why in your gasket kit is tells you to replace the bolts, it is recommended. I know, because I am the GM Manager for fastening engineering. Hope this helps

Mar 28, 2009 | 1995 Oldsmobile Cutlass Ciera

1 Answer

1990 olds cutlass ciera

the bolt has come out of the belt tensioner on a 1990 Oldsmobile cutlass ciera i need to know what size the bolt is can you help

Feb 05, 2009 | 1990 Oldsmobile Cutlass Ciera

1 Answer

How to change a starter in a 1992 oldsmobile cutlass ciera

disconnect battery,three bolts hold it to bell housing and two wires ,one is the feed the other activates the solonoid Easy job to do but dirty dirt grease and muck

Jan 24, 2009 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1995 Oldsmobile Cutlass Ciera Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides