Question about 2005 Dodge Ram

1 Answer

Removing tailght lenses cover?

How do you take the tailight lenses off to change the bulbs?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Drop the tail gate and there are screws where the gate was and if i remember correctly they are torx screws and u just pull straight out the whole cover cause it's clipped into place. when u have the whole tail lamp in your hands unplug the power connecter then use a phillips and unscrew the housing and replace the bulbs. The bulbs are a real pain in the *** cause they have that small little metal piece that breaks all the fricken time. well it does for me anyways. good luck

Posted on Jun 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you change the tail lights?? How do you access the bulbs??


drop tailgate look beside light fixture there are 2 screws on inside of bed, remove and then lift out lens, bulbs are in backside on lens.

Mar 28, 2011 | 1987 Nissan Pickup

1 Answer

How to change a brake light


On most new cars you need to go in trunk peal back carpeting or remove plastic cover,locate nuts holding tailight in place, remove nuts,(make sure you get all of them)grab taillight and slowly pull away from back of car.If it dosent come off fairly easy you missed a nut or 2.Once your holding tailight in your hands just turn socket on back of light to get to bulb.

Feb 12, 2011 | 2008 Pontiac G5

1 Answer

HOW TO CHANGE A HIGH TAIL STOP LIGHT


open truck. remove access cover on tailight assembly. Turn the plastic tail light plastic bulb holder 1/4 turn, pull out burned bulb.

Feb 01, 2010 | 1998 Lexus ES 300

1 Answer

I have tail lights, but no brake lights


the brake light switch has it's own fuse that is on all the time. test light power at the switch? push the peadel down and both wires should be hot if they are theres more.! turn on the hazard flashers do the brak lights flash brightly? That proves the bulbs the sockets and the wires if they do. if not the cicirt boards in the tailghts can be bought at discount part stores and their better than the ones that came with the truck but they'll fail too. Before buying them turn the flashers on and remove the tailight and unplug it. turn the parking light on tooas you need to see some thing that works also, Find a good ground for your test light and probe each wire of the plug one wire the brown one will be on steady the yellow or green wire will be flashing if the front of the truck is OK the other two wires are the backup light and the ground wire if the test light works and the light doesnt check the bulbs their good chang e the circuirt boards

Aug 12, 2009 | 1988 GMC K2500

1 Answer

How to change tail light bulb on 1999 buick lasabre


Remove cover from rear of trunk to access nuts. Remove tailight all 4 nuts. Pull tailight out. You will see the bulb sockets behind the tail light assembly. Turn counter clockwise to remove socket. Install same way.

Jul 26, 2009 | 1999 Buick LeSabre

1 Answer

Replace turn signal bulb on a 2000 monte carlo


inside your trunk you must pull back carpet exposing bolts holding tailight in. remove those bolts and pull tailight out. you can then remove sockets by turning counter clockwise. replace appropriate bulb

Jun 21, 2009 | 2000 Chevrolet Monte Carlo

1 Answer

Replace Tailight Bulb. Brake/Running


did you remove the rear access cover in the rear inside quarter panel?

Feb 23, 2009 | 2005 Jeep Grand Cherokee

2 Answers

1993 tail lights not working, brakelight ,work an turn sigles work. but no tailghts.


sometimes they are seperate bulbs i would check all the bulbs if there all okay then u might have a short somewhere

Oct 27, 2008 | 1993 Mazda MX-6

Not finding what you are looking for?
2005 Dodge Ram Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...