Question about 2000 Chevrolet Astro

2 Answers

Location of the camshaft sensor on a 2000 chevy astro van

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

The sensor is in the distributor you can get it out with out pulling the distributor but its tight and has to be perfect .... pull the cap off and then the button youll see a sensor under a metal cup looking thing with a wire harness coming out of it i believe you need torks bits for the whole job if you go to any parts store and buy one then pull the cap this will make more sense.
Good luck and hope this helps.

Posted on May 26, 2009

  • rick585
    rick585 Nov 19, 2012

    The Ignition module is in the distributor.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 3,433 Answers

Front of engine next to crankshaft pulley..

Posted on May 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the camshaft position sensor for


They are located on each head if im not mistaken on the corner near the air intake boot that goes to air filter. The cylinder head close to the radiator is 2 4 6.

Sep 20, 2014 | 2000 Lexus ES 300

1 Answer

Where are yhe fuses located on a 2000 chevy astro van located


Have you checked your freon level? The compressor will not engauge when the R134 level is too low .More than likely you need to recharge the system after 14 yrs you may have a small seal leak. Try picking up a recharge kit with a gauge attachment. This has worked well for me on my 3 Astros I currently own. Othwise the fuse box is on the drivers side left of the steering column.

Jun 27, 2014 | 1997 Chevrolet Astro

1 Answer

Fuse location


Fuse panel is usually located under the dash by the driver's feet or under the hood.

Sep 30, 2013 | 2000 Chevrolet Astro

1 Answer

I have a 96 chevy astro van and i drive it down the raod and it dies starts back but engine lights comes on , whats the problem ?


BEST CODE SCAN VECHICLE BECAUSE PROBLEM COULD BE IN THE HVS IN THE DISTRIBUTOR,FAULT IN IGNITION COIL OR CAMSHAFT POSITION SENSOR.

Aug 03, 2011 | 1996 Chevrolet Astro

1 Answer

Ineed to know where is located the oxigen sensor in a 95 chevy astro van


the front sensor or "sensor one " is located on the drivers side in the exhaust Y-pipe, sensor two is located near the catalytic converter

Jan 14, 2011 | 1995 Chevrolet Astro

1 Answer

I need to know where is located the oxigen sensor for a 95 chevy astro van


They are the sensors that are in the exhaust. I believe that there are three in this van. Depending on what engine it has. They are the only sensors in the exhaust.

Jan 14, 2011 | 1995 Chevrolet Astro

2 Answers

Where is the fuel filter on a 200 chevy astro van


should be around tank. Thank you for asking and I hope this helps you.Please leave me a 4 thumbs up.

Jul 20, 2010 | 2000 Chevrolet Astro

1 Answer

How to change a fuel pump on a 2000 chevy astro van


It is located in the gas tank, you will need to remove the sending unit at the top fo the tank. To access the sending unit, you will need to drop the tank by removing the straps. It is a big tank so drain as much as possible and disconnect the batter before you start.

Hope this helps

May 20, 2010 | 2000 Chevrolet Astro

1 Answer

97 Chevy Astro van lugs, like it misses, B4 finally cranking on


crank shaft sen. is easy enough to change.its mounted near timing chain cover,cam sen.is somewhat harder,its in the distributor,id doubt that both are defect

Mar 09, 2009 | 1995 Chevrolet Astro

Not finding what you are looking for?
2000 Chevrolet Astro Logo

1,131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...