Question about 1995 Suzuki Sidekick

1 Answer

Combinationswitch both my turn signals dont work but the lights, hazards wipers still work. i have check the fuses and the are all ok. i have done some looking and think it may be the combination switch but not sure can some one tell me how much i am looking to spend for this piece or is their another something i can check. and can should this problem be fixed by a licensed mechanic or can i fix it, anything helps, thank you

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You should be able to pick up a combination switch at a self service parts yard(like a Pick N Pull) for about $25-$35.
They are pretty easy to take off.
You need to remove the horn cover. I think four screws. Another four on the **** shaped covers over the combination switch itself.
Once the horn cover is off. You need a steering wheel puller. Very inexpensive at any automotive shop.
Pull the steering wheel, and the combination switch should pull straight up. Follow the wiring down the steering column and you will find a large plug. Unplug it and the switch will come off in your hands.

Good luck.

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My wipers dont work and my right signal light flashes fast and my rear wiper dont work. some kind of sensor problem but not sure where that sensor is


ck fuses for wipers and rear wiper, the signal flashes fast most likely because theres a bulb out, turn on the hazard lights and see which bulb is out.

Jul 05, 2010 | 2001 Chevrolet Blazer

1 Answer

Signal and hazard lights dont turn on


Look Behind The Clock On The Dash, Take That Out and There Should Be Two Connectors One Is For The Hazards And Signals And the other The Clock If They Are Not Connected The Hazards And Signals Wont Work. You Will Need A Flat Head To Take The Clock Out. Hope That Helps.

Mar 11, 2010 | 1998 Honda Accord

1 Answer

I have a 2004 ford taurus and my turnsignals dont work anymore. In the morning they will work a couple times but after that they dont work i checked all the fuses but someone told me i may need to change...


the multifunction switch is a common problem on fords. the switch controls the wipers, turn signals, high beams and hazards, and sometimes only 1 part of it will fail. in your case it sounds like 2 parts fail at the same time.

Feb 20, 2010 | 2004 Ford Taurus

1 Answer

My brake, hazard and turn lights dont work, i


well u have two seprate problems the hazards and turn signals have a flasher that needs replacing if the fuse is good on the fuse box marked signals .and there is a brake light switch under the dash board near the brake pedal it has two wires on it check the wires make sure they are connected if so replace the brake light switch

Nov 13, 2009 | 2002 Chevrolet Astro

2 Answers

No brake lights, turn signals, or 4-ways.


Did you actually check the bulbs? I believe your brake lights, signal lights, hazards all use the same bulb for each side.

Your brake lights may be your brake switch just above your brake pedal.
The signals could be your electronic flasher module (EFM) located under the dash near the steering column.
Your hazards may be affected by the EFM, but not likely and the switch for your hazards may be faulty

Sep 10, 2009 | 1998 Chevrolet Blazer

1 Answer

2004 monte carlo. Turn signals dont work. The stalk still works with other functions, such as wiper, brights. The fuse is fine. Could it be a bad relay? When u push the stalk up or down nothing happens on...


try pressing the hazards on and off if they still don,t work replace the flasher unit. it is built into the hazard switch( all one unit ) change this and all will be good.

Aug 30, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

No rear turn signals, front turn signals light but dont flash


the problem is a bad flasher. $10.98 at advance auto. remove panels under steering wheel with 9/32 socket. It is hard to see turn blinker on to confirm it should tick each time. should take about 1/2 hour.

Jun 01, 2009 | 1999 Cadillac DeVille

1 Answer

1993 mark VIII blower motr stopped working, Also the hazard and turn signals not working. I replaced the 30 green fuse. did not solve problem,but this 30 fuse controls both haz and blower. So it must be a...


Dont know whay the blower motor doesnt work, but that age with these cars (I have two 94 Marks) both have had the turn signal switch replaced for problems with hazards not working, wipers not shutting off, etc.
To check your climate control system: Press OFF and FLOOR at the same time, release, then hit AUTO. That will make it self-test. You will get 888 (ok) or an error code (024, 025, or such)

Jan 18, 2009 | 1993 Lincoln Mark VIII

Not finding what you are looking for?
1995 Suzuki Sidekick Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...