Question about 1985 Nissan 300ZX

1 Answer

Cruise control stopped working

The cruise control on my Z quit working. The light on the inst. panel comes on when you flip the dash switch. But when I push the cruise button on the steering wheel it doesn,t work. The 2nd cruise indicator on the inst. panel doesn't come on. Nor does the cruise engage. I can not find a blown fuse. Is there anything else I could check? If I knew where it is at on the motor maybe I could use a meter on the controller. Can you tell me where this is located?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 3,592 Answers

Check brake switch under dash above the brake pedal. See if sensing wires are broken . or if it uses a duplicate switch sensor check it is engaging properly. Also check you tube on possible failures.
Also in the engine bay the cable from the accelerator petal will attach to the trottle on the engine. Check for another cable at this location from the cruise control and check the cable is not broken .

Check brake globes are functioning and are not blown as well.

Posted on Jun 18, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: Cruise control

Bad relay. They are to the right of the fuses (fuses inside the car). You can see the relays if you open the cover to the fuses (they are big blue cubes), but will need to remove a few screws to remove the panel to get to them. I can't remember which one it is, it might make a clicking noise when you try and turn on the cruise. Or you can swap "matching relays - compare diagram on top" and see what else stop working. I had to replace several, my dash when out, my cruise, and I think one is the fan that blows your ac and heat.

Posted on Jun 29, 2008

betz73
  • 298 Answers

SOURCE: Cruise Control

check the fuse and relay, or you may have vacuum leak at the cruise diaphram.

Posted on Aug 16, 2008

csmock132
  • 4669 Answers

SOURCE: 95 maxima cruise control doesn't work

He needs to resistance check the control switches and check the brake switch.

Posted on Mar 12, 2009

cshubart
  • 146 Answers

SOURCE: my cruise control not engaging

the servo for the cruise is out it located under the hood with a cable going to the throttle body

Posted on Sep 26, 2009

  • 2 Answers

SOURCE: 03 lesaber cruise lights up on steering wheel an

your igntion switch is bad just happen on my 2003 century little black box were your key goes in

Posted on Dec 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Dodge Grand Caravan. I just had new front brakes put on, replaced the front bumper and a lightbulb for the rear blinker. Now my cruise control doesn't work.


Au contrer . the brake pedal should be up all the way, or your sw that turns on brake lights also affects cruse....when your brake pedal is slightly pushed it disconnects the cruise. Did you bleed brakes properly?

May 15, 2017 | Dodge Cars & Trucks

1 Answer

2008 Dodge ram 1500 4x4 4.7 liter, cruise control light comes on the dash. When I push the set button nothing happens and the light that says cruise on the dash stay on but will not engage


Locate and check the fuse, check clutch switch, che k vacuum hoses, and vehicle speed sensor and throttle linkage. Hope that helps.

Dec 18, 2015 | Dodge Cars & Trucks

2 Answers

My 2006 f150 has new brakes and rotors,fluid full but my dash brake light stays on. Soon as you start it and the whole time you drive. Also the cruise quit too. Once the light went off then the cruise


This sounds like the brake light switch or the control switch on the brake pedal is bad or loose. Check under the dash above the brake pedal there should be one or two switches that tell the brake lights to come on and the cruise control to shut down.

Feb 13, 2015 | 2006 Ford F-150

1 Answer

2003 oldsmobile alero v6 -- cruise control stopped working...The cruise on/of button lights up, the green light cruise indicator comes on in the dash panel, but cruise control does not engage when CST SET...


Try checking the small switch at the top of the brake pedal. There may be two one for brake lights and one for the cruise control. To ascertain what is what, pull one wire off and see if brake lights work. If not, then the other switch controls the cruise control disconnect and engage..I you have a DC test light check to see if power is on on both side of the switch with brake pedal up. If so, depress pedal and check power on the other side there should be none, if there is the switch is defective.

Aug 02, 2017 | Cars & Trucks

1 Answer

1990 Camry Cruise Control


It is not the same model, but this may assist, p163 on
http://www.turboninjas.com/camry/be.pdf

Jun 09, 2013 | 1990 Toyota Camry

3 Answers

Crusie control does not work on 2011 gmc sierra 1500 and I've already replaced the switch?


If the switch is replaced,then it can be wiring issue or faulty cruise control board.But as the switch is replaced,get the voltage at the switch tested to confirm the switch is actually receiving voltage.If no voltage received at switch power supply wire then ,apply external 12 volt power to the cruise control switch wire and then see if cruise control comes ON.If yes,then you know wiring is issue.
=============

On this case, to troubleshoot this problem, there are solved help links. Click the link directly and refer the details to solve this problem yourself, with help of diagrams: ------

Ford ranger cruise control not working? http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html

-----------

Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------

Horn and cruise control not working on Plymouth Grand Voyager?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------------

Horn and Cruise control quit working on 2003 Jaguar S-Type?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

-------------

Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500

http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------

Cruise control stop working on 1994 Ford ranger?

http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

----------

Cruise control not working?

http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

--------------

1996 Ford Explorer: Cruise Control Wiring Diagram?

http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html

----------

These will help.

Thanks.

Nov 28, 2012 | GMC Cars & Trucks

2 Answers

Cruise control not working


On these case,to troubleshoot these problem,there are solved help links.Click the link directly and refer the details to solve these problem yourself,with help of diagrams:------
Ford ranger cruise control not working?


http://technoanswers.blogspot.in/2012/02/ford-ranger-cruise-control-not-working.html

----------- Horn and Cruise control quit working?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html

--------

Horn and cruise control not working on Plymouth Grand Voyager?

http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html

------------------
Horn and Cruise control quit working on 2003 Jaguar S-Type? http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html

-------------
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
Cruise control stop working on 1994 Ford ranger? http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html

----------
Cruise control not working? http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html

--------------
1996 Ford Explorer: Cruise Control Wiring Diagram?


http://schematicsdiagram.blogspot.in/2012/06/1996-ford-explorer-cruise-control.html
----------
These will help.
Thanks.

Nov 22, 2012 | 2003 Ford Expedition

2 Answers

The cruise control switch will not engage or set when pushing set button, but the green cruise light is on on the dash.


Check your fuse panels both inside, and outside the vehicle, as well as the connections to the cruise control.

Mar 29, 2011 | Nissan Frontier Cars & Trucks

1 Answer

Cruise control quit working, so where should I check. I would like to know about the wires and fuses and where to trace them down.


The 1994-95 Chrysler Minivans have four electrical panels/fuse boxes.:
  1. Fuse Block Panel (In Dash)
  2. Relay Block (In Dash)
  3. Micro Relay Block (In Dash)
  4. Power Distribution Center (Underhood)
Fuse block is located on left side of instrument panel, behind access door. Speed (cruise) control fuse is No. 14.
Note: If you have an airbag light on your dash litup, it might be something called a clockspring, which you'll have to take to the dealership/garage to get fixed. (Dealership is probably your best bet)
Hope this helps! :)

Oct 20, 2009 | 1994 Plymouth Voyager

1 Answer

In 1998 2wd Grand Cherokee cruise control stopped working


Do the brake lights work now, as they should? The brake light switch generally triggers the cruise control to snooze.

Aug 04, 2009 | 1998 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...