Question about 1996 Ford Explorer

1 Answer

Need rear brake pad and rotor replacement

I'm grinding the rotor on the rear brakes. What do I need to fix the problem? What's the cost for new pads and rotors? THanks!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

Just the basics, Brake pads range from $25-65 depending on what kind of quality your looking for. If the brakes are grinding, you will need 2 rotors ranging from about $50-70 per wheel. On top of that, after you pull the wheels you will have to determine if the calipers are frozen or hanging up. Calipers on that truck run about $75 apiece. You didn't specify if it had ABS brakes so I based everything on standart disc brakes. Hope this answers your question. Best of luck.
Greg

Posted on May 26, 2009

  • Greg Margossian
    Greg Margossian May 28, 2009

    If you found my solution to have thoroughly answered you qustion, kindly rate the solution to the degree you feel you were helped. Thank you very much.

    Greg

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I feel a vibration when I step on stop brake pedal. Could this be my brake pads need changimg.


yes it could be worn brake pads, it may also mean that the discs themselves are warped. Less likely are worn bushes in steering. Hope this helps

Feb 04, 2016 | Cars & Trucks

3 Answers

WHy dose my brake pedal push back and make a grinding noise


Look through the openings in your front wheels and look at the front rotors-are they gouged up? You are probably running metal-to-metal, pads to rotors.
Chances are real good your rotors will have to be replaced along with new pads, but if you catch it early enough you might be able to have them machined, although nowadays that is hardly easy to get done and the savings usually is not as significant as it once was.

May 23, 2011 | 1995 Pontiac Bonneville

2 Answers

My brakes sound like they are grinding


check rear rotors and front rotors for rust buildup (flahlight helps). does the vehicle shake when you come to a hard stop? You will either need to have a front or rear or both brake job (rotors cut or replaced and new brake pads) If the vehicle is shaking when coming to a stop, its probably your front pads. If your hearing the noise from the rear its the rear pads or it you hear it from the front its the front pads. If there significant rust build up or your pads are low a brake job is recommended.

May 04, 2011 | 2008 Nissan Armada

4 Answers

Brake trouble Grinding sound


sounds like it is time to replace the brake pads. i would do it quickly before you ruin the rotors.

Apr 06, 2011 | 2005 Mitsubishi Lancer

3 Answers

There is a grinding sound when I press the brakes on my Hyundai 2010. What might be the problem?


Hi,
If it is a grinding noise then you have a problem with the brake pad area, it may have a stone caught in this area. Or it may have worn front brake pads.

Jan 23, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

My 2006 mercedes e500 brakes are squeaking when I brake. Does this mean I have to replace the brakes?


first check brake pads, are they in good condition first remove front pads and grind outer edge and inner edge 1 mm with angle from mettle part, do the same for both pads in each wheels then fix it back, do the same to the rear pads too, the problem is your brake rotors are wear, when you replace brake pads next time must need to be replace brake rotors together with the pads. is this information helped you?

Oct 27, 2010 | 2006 Mercedes-Benz E-Class

1 Answer

How to change rear brake pads for a honda 2007 ridgeline


The 2007 Honda Accord is equipped with four wheel disk brakes. Disk brakes wear down and require regular maintenance. Worn brake pads can cause squeeling and grinding noises, as well as reduced braking power. Improperly maintained brake pads can cause damage to the brake rotors as well as brake failure. Save on labor costs by replacing your own brake pads.www.lightdeal.co.uk

Jan 07, 2010 | 2007 Honda Ridgeline

2 Answers

My escape is making a grinding sound, along with pulsating when braking. My husband has replaced the abs sensor, and it is still doing te same thing. Any suggestions what to do next?


The grinding sound when braking is almost surely worn brake pads. If an abs sensor is bad it will set the abs light on. Heres an easy way to figure whether to look at the front or rear brakes first. When braking, take notice as to whether the vibration is felt more in the steering wheel or the seat. If it is more in the steering wheel take a look at your front brakes first, and obviously if it is felt in the seat look at the back brakes first. Both front and rear need to be checked out because the pulsating you are feeling is due to rotors or drums that have been heated up and warped. In order to fix both problems, you most likely will need brake pads and rotors/drums. If you just replace the pads, not only will the pads wear away faster due to the damage to the rotors/drums, but your vibration issue will not go away and infact may intensify.

Dec 10, 2009 | 2003 Ford Escape

4 Answers

Where do you put the brake fluid on this car? Because, my car is making a grinding sound when I put my foot on the brake.


The grinding noise probably means you need to put new brakes on. If you fill the brake fluid reservoir, and then change the brakes, the new fluid will run out anyways, because the new brakes will have to be put in, and the fluid will run out.

Oct 01, 2009 | 1991 Dodge Spirit

Not finding what you are looking for?
1996 Ford Explorer Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...