Question about 2006 Dodge Ram 2500

1 Answer

Fcm location I posted earlier about my headlights not working only my high beams work all the fuses are good my problem now is trying to locate the FCM (forward control module) do you know where to find it on a 2006 dodge ram cummins 2500

Posted by on

  • Anonymous Mar 22, 2014

    The high beams work fine. the low beams not at all. Have all other lights. Can not locate any fuses or modules to check. Where do I start?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

The FCM is somewhere in the passenger compartment (in dash) location. The best solution is to take the vehicle into an authorized service dealership and have them diagnose this issue.

Posted on May 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No highbeams low works fine. changed switch but still the same fuses are good. help

98 Explorer No High Beams Problem - Ford Explorer and Ranger ...

Nov 15, 2012 - 16 posts - ‎8 authors
98 Explorer XLT 4X4 - No high beams. I've read thru many threads here and other places about this. Pulled and checked every fuse - all good ... Fog Lights Off When High Beams Activated - Normal?
19 posts
Nov 30, 2015
Headlights not working (not MFS, Fuses, or bulbs)
12 posts
Feb 24, 2015
97 explorer no low beams high beams
3 posts
Nov 4, 2013
no headlights in 96
15 posts
May 7, 2009
More results from

Jan 03, 2016 | 1998 Ford Explorer

2 Answers

Where are the fuses for my front headlights

there are no fuses for headlights o any car , there is an automatic breaker inside the headlight switch.
do your high beams work? if so then your headlight switch is ok
have you tried replacing on of the headlight bulbs with a new one? sometimes both will burn out at the same time due to a bump in the road.
you could have a bad high beam switch it's more common of a failure than a headlight switch on some years.
did you remove the headlight switch and remove the plug and look and see if connector and wires are melted , very common problem on all years of jeep. .

Jul 02, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

High beam headlight relay located

there is a fuse for that circuit in the fusebox lower dash if this is ok check that your getting power to the high beam wire at bulb holder if not the part of switch for high beam isn't working if are getting power check the bulb holders for warping etc as can get very hot and mishapen so that the bulb doesnt always sit on the contacts but if bothe lights out i'd think its a power supply problem

May 01, 2014 | 1995 Subaru Impreza

2 Answers

Headlights do not work. Beam works, park lights and other lights work. Bulbs ok

more than likely a fuse or a relay is bad. locate the fuse for the headlights (owners manual) and check if it is bad, if the fuse is good, find the relay and give it a flick or two and try the headlights then, if they work, its time for a new relay

Mar 19, 2011 | 2006 Ford Focus

1 Answer

Low beam headlights do not work, high beam headlights work

Hello and Welcome to FixYa!
Check for the fuses and relays, located in the Engine/ Driving Compartment.. The fuse/relay for the Headlights will be marked on the casing of the fuse holder. You have to locate that fuse and have to replace it in case of bad/ faulty. Also do make sure, that the Switch that performs the High/Low beam operation is properly working. Worst case scenario would be the bad filament/ projection tube usually called bulb/ beam.


Mar 07, 2011 | 2002 Pontiac Bonneville

2 Answers

My low beam headlights do not work as daytime running lights or manually with the headlight knob pulled out . The high beam headlights however do work if I have the knob pulled out all the way with the...

Check out your fuse associate with the low beam headlight, secondly there is a relay fuse under fuse rely box under the hoos. Locate this box, and locate the relay fuse associated to the low beam. You can rotate the relay with another relay of the same spec to see if the low beam lights are coming on. I would believe that it is a fuse that is blown, check your owners manaual on the location of the fuse box. Usually it's located in the driver side kick panel.

Jan 30, 2011 | 2001 Buick Regal

2 Answers

I have a 2004 dodge ram 2500, Hemi. Yesterday the low beam went out on the driver side only but the high beam works on the same light bulb on the driver side. I tried replacing the light bulb but the same...

The Front Control Module is attached to the under hood fuse block with 4 screws, The FCM is the power supply to the headlamps, if all other lamps are working correctly the concern is most likely caused by a defective FCM. Verify the WT/DB wire, left low beam driver is good. If it is replace the FCM. you can use a FCM from a salvage yard, these modules do not need to be programmed for your vehicle.

Jan 23, 2011 | Dodge Ram 2500 Cars & Trucks

2 Answers

Right headlight low beam does not work, high beam does. Left side headlight works fine

I had the same problem with my 2004 ram, passenger side low-beam wouldn't work after replacement. Online I saw many things from socket replacement to Fcm replacement. What worked was to remove fcm (front control module) and clean appropriate contacts with small nail file . Repair took less than 1 hour and cost 0$, wish I could give credit where I found info.

Nov 28, 2010 | 2004 Dodge Ram 1500

3 Answers

Only one headlight comes on on low beam. On high

I solved this exact problem on my 2002 Grand Caravan Sport by replacing the fuse block located under the hood. The problem was the circuit board in the bottom of the fuse block gets corroded and shorts out causing information from the fcm which travels through this board to get mixed up. I got my fuse block from an online mopar parts wholesaler for less than half of the dealer price. Just to let you know some have said they fixed their's at least temporarily by removing the fcm from the front of the fuse block and cleaning and or tweaking the metal tabs on it. This did not work for me. The fuse block did. It was about a $200 gamble for me...and this time it paid off. Good luck.

Jan 06, 2010 | 2002 Dodge Grand Caravan

1 Answer

Headlights wont work

Fuse 22 and fuse 23 are left and right low beam headlamp fuses located in the PDC. 23 and 24 are high beam fuses. There is also a low beam and a high beam relay in PDC as well. If no headlights work I would check for main switch or multifuction switch (wiper/high beam) since each light has its own fuse and relay.

Jun 05, 2009 | 1997 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

642 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides