Question about 2006 Chevrolet Cobalt

1 Answer

My plate light dont work and i just put in a new bulb is it the fuse and if it is what is it called..

I cant seem to find the plate light fuse for a 06 colbalt

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

It runs off your tailight fuse if this is ok then check your wiring to the light itself and as always the bulb.

Posted on May 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

License plate light


The licence plate doesn't have a fuse, it comes on when you put your lights on, if you have your park lights on and the plate light isn't working then generally it's just a bulb, see what you can find, cheers good luck

Feb 19, 2014 | 2002 Mitsubishi Eclipse

1 Answer

Turn Signals dont work Sonata GLS 1997 v6 3.0L the bulbs are new but cant find the right fuse to change all fuse seems to be ok


see the diagram attached. test the bulbs+fuse+loose wires+corroded wires+oxide, tight every wires.
God bless you60f0e02f-d388-4b4e-8cf6-743dd4b7fa17.jpg

Oct 30, 2013 | Hyundai Sonata Cars & Trucks

1 Answer

I cant find my fuse for the license plate lamps. I was in an accident and one of them got smashed and the other is not lighting either. Im thinking its a fuse problem but there is no fuse dedicated to the...


hi.
most cars run licence plate lamps on the same fuse as the tail lights.
if your tail lights work, then it is more likely to be a fault on the bulbs or bulb holders, or the wiring in that area, probably caused by the crash.

i would recheck this area first, using new bulbs to rule these out.

May 13, 2011 | Nissan Xterra Cars & Trucks

1 Answer

I cant find the fuse for the licences plate light


It will fused with the headlights. If all the other lights work, replace the license plate light bulb(s).

May 30, 2010 | 2004 Acura MDX

3 Answers

The letters on my shift selector of my Nissan Do not light up.


Likely its the bulb that illuminates the shift selector, There not to hard to replace, it will actually prove to be more of a challenge trying to find the bulb anywhere other then the dealership where you will pay around $150 for a $10 bulb. as for actually replacing it, its not to difficult if you can find the screws that mount the plate that has the letters around your shifter, once you find those, just pull the bulb out, and replace it with a new one. Be sure to disconnect the battery before doing this though, so you dont cause a short. If you cant figure it out, its probably best to seek help from a mechanic or someone that is familiar with it.

Mar 09, 2010 | 2006 Nissan Sentra

2 Answers

Is there a fuse for the license plate lights on a


The licence plate lamps are tied to your tail lamp fuse on most models. Might be a bad ground.

Feb 11, 2010 | 2005 Chevrolet Silverado 1500 2WD

2 Answers

My license plate lights dont work help?


the bulb is most likely burned out. there are a few types of license plate lights out there. some where you have to replace the whoel unit and some that have replaceable bulbs. both you can find at your local parts store.

Jan 30, 2010 | 1990 Nissan Pathfinder

1 Answer

My brake (running lights) dont turn on only when i step on the brake. nor my licesne plate work nor my gauges lights work. i got new bulbs for my brake light.


First, your instrument panel lights. Make sure to check the knob on the dashboard to the left of the instrument panel which controls
the brightness of the instrument panel lights. Push the knob to get it to pop out. Turn the knob to adjust the brightness.
If that is not the problem, go to your fuse boxes. Check those in the interior fuse box (left kick panel, below the dash--fuse chart on the cover) and those in the engine compartment fuse box (far upper left as you face the car). If, after you replace anything that has blown, it blows again, that would suggest a short somewhere in the system.
If you don't find any blown fuses (and I think you will) then it's time to go to the light bulbs. The tail light bulbs are accessed from inside the trunk. The license plate bulbs are just above the license plate and are accessed by removing two screws that hold the fixture in, then taking off the click plate and removing the bulbs.
Hope this is of some help.

Oct 29, 2009 | 1994 Honda Accord

2 Answers

NUMBER PLATE LIGHTS NOT WORKING


take the bulb back out and clean inside the bulb holder, there may be some corrosion or other debris in there

Nov 03, 2008 | 1999 BMW 318 ti

Not finding what you are looking for?
2006 Chevrolet Cobalt Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...