Question about 2005 Hyundai Sonata

1 Answer

2005 Sonota turn signals and hazards stop working

Turn signals worked fine then they would come on then go off now they dont work at all and the hazards quit also. tried to replace the relay but cant find it dealer says it up in the dash. Thanks..

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Multfunction switch go to oriely auto parts buy 20 dollar book you will be money ahead hey vote for me ok if you need help let me know

Posted on May 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Chrysler Vision hazard light


on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Nov 10, 2013 | 1997 Chrysler LHS

2 Answers

My 2005 Crown Victoria .....Brake lights just stopped working (upper light also) All other functions work fine(hazards,turn signals & running lights) Just replaced the brake switch & there st


change the light control module. it is located under the dash near your right knee on the drivers side. this is a common problem with crown vics.

Feb 11, 2013 | 2005 Ford Crown Victoria

1 Answer

My hazard lights won't come on at all. The turn signals work fine, as long as the hazard button is not depressed. The hazards used to work, but if the hazard button was pressed and I put on a turn signal,...


sounds like a dirty switch, happens a lot in the UK as the switch is checked for the safety every year so the dirt in the switch causes open circuits, it is a complicated switch, it has many contacts that do different things when in and out, try a salvage yard

May 03, 2011 | 2001 Kia Rio

2 Answers

2005 CHEVY IMPALA TURN SIGNALS AND HAZARDS DONT WORK ALREADY REPLACED FUSES


The hazard button is probably bad it controls your blinkers and hazards. Push around on it and see if you can get it working. There was also a recall on these if your car meets requirements the dealer can tell you if yours is covered All you need to give them is the VIN number

Dec 03, 2009 | 2005 Chevrolet Impala

1 Answer

Turn signals dont work at all


Try your hazard lights. If they work, then it's your turn signal flasher. With your hazards on, listen under the dash for the constant "clicking". Locate the flasher for your hazrads... the turn signal flasher should be near it. Once you find it, just pull it out and replace.

You can use your hazard flasher in place of your turn signal flasher, just swap the two. This will get you to the store to buy a replacement.

Jun 08, 2009 | 2005 Hyundai Accent

1 Answer

Got my stereo stolen out of my 2005 Grand Am, and now neither my turn signals or my hazard lights work. I looked for torn or pulled out wires, but the only four that were loose were all attached to a unit...


The only thing that should not be working would be the audible turn signal / hazard signal sound. When the turn signals are activated, the audio (radio) system generates a clicking sound that indicates the signals are working.
When the radio is missing, no sound is generated.
Are your turn signals working outside, but no sound or are the signals not working at all.
Let me know.
Regards,

Apr 19, 2009 | 2005 Pontiac Grand Am

2 Answers

Turn signals and hazard don't work


Next best guess is the flasher unit has failed, this could be your little blue box, pick up a replacement at any auto parts store and replace it.

Apr 15, 2009 | 2005 Dodge Caravan

1 Answer

HAZARD LIGHT DONT WORK ON 2005 HONDA CIVIC WHEN TURNED ON CHECKED FUSES THEIR OK TURN SIGNAL WORK OK


Take your car to an autozone store. Ask them to sell you a new hazard light flasher and help you install it. They assist for free.

Mar 24, 2009 | 2005 Honda Civic

1 Answer

Lower brake lights dont work,third light does


Turn signal switch 95% of t he time. Try to work your hazards, if it stuck at all will also cause this.

Feb 10, 2009 | 1998 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...