Question about 1992 GMC Sonoma

1 Answer

Headlights i have a 1992 gmc sonoma v6 4.3 liter 4wd truck and the headlights move up and down and dont stay in place what do i need for it???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • GMC Master
  • 3,854 Answers

At Auto Zone or any other large auto parts store like Parts Source will have the Headlight Retainer clip's and springs that hold the headlight housing to the body.
Good luck and hope this helps and when you replace the old ones if there still there, put some grease on them so they don't rust. If you need instructions, they should have the step by step to install and aime the headlight.

Posted on May 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whate type of fluid does a 1991 gmc sanoma 2.8 liter 5 speed take for transmission


i have a 1992 gmc sonoma with a 2.8liter engine with a 5speed manual trans. does it uses atf or gear oil if it uses atf what kind?

May 08, 2012 | 1991 GMC Sonoma

1 Answer

I need the fireing order for a 2000 sonoma 4.3 vortec and when i put the gas pedal to the floor it bogs down i just did a complete tune up and it still does it and no engine light is on


2000 GMC S15/T15 Sonoma P/U 4.3 liter V-6 VIN "X"
and
2000 GMC S15/T15 Sonoma P/U 4.3 liter V-6 VIN "W"


zjlimited_213.gif


Hope helps (remember to rate this answer).

Feb 25, 2011 | GMC Sonoma Cars & Trucks

1 Answer

1991 sonoma 2.8l what is the sparkplug wires order at plugs and distributor cap


Got kind of confused because I'm pretty sure the Sonoma didn't come out until 1992 but then again I could be wrong. Not perfect you know. Anyhow this is the firing order for the GMC 2.8 Liter engines from 90 - 93 (see picture below). I hope this is what your looking for and I hope it helps. good luck.

clifford224_42.jpg

Feb 20, 2011 | 1991 GMC Sonoma

1 Answer

Firing order sparkplugs and distributor


1992 GMC P/U 4.3 liter V-6 VIN "W"

55c659f.gif

Hope helps.

Sep 04, 2010 | 1992 GMC Sonoma

1 Answer

I JUST NEED A DIAGRAM OF THE SPARK PLUG FIRING ORDER ON A 1995 GMC SONOMA. GOD.


1995 GMC S15/T15 Sonoma P/U 2WD 2.2 liter L4 VIN "4"

fe2eb79.gif



1995 GMC S15/T15 Sonoma P/U 2WD 4.3 liter V-6 VIN "Z"

fd99af5.gif



1995 GMC S15/T15 Sonoma P/U 4WD 4.3 liter V-6 VIN "W"

38d92c6.gif

Hope help with this (remember rated and comment this).

Mar 28, 2010 | 1995 GMC Sonoma

1 Answer

For 4x4 gmc sonoma is the 4 wheel drive light is always supposed to be on


It's only suppose to be on when the 4WD is in use and should be off when in 2WD. If the light is on, replace the 4WD switch on top of the transfer case, drivers side. You can pick up the vacuum switch at Auto Zone, Napa for around $25.00 and is common to fail. When they fail, the vacuum to the front axle hub actuator will stay engaged and the axle will always be engaged. it's a simple fix and should take you 15min to replace if you can get under the Sonoma with out jacking it up off the ground.

Disconnect the vacuum line from the switch and unscrew the switch out from the transfer case with a 3/4 inch wrench i believe. No need to worry about Teflon tape, the switch is tapered and will not leak fluid.

Good luck and thank you for using Fixya.

Feb 23, 2010 | 1992 GMC Sonoma

1 Answer

1997 Sonoma won't go into 4wd. When the 4wd button is pushed it


check the actuator under the truck at at the transfer case may need adjustment or lube the actuator rod

Dec 14, 2009 | 1997 GMC Sonoma

3 Answers

Starter problem on a '92 GMC Sonoma


have you disconect the positive battery cable .because it is hook to starter.if you have disconect battery cable.then the starter has a bracket holding it in place so you cant move it.

May 23, 2009 | 1992 GMC Sonoma

Not finding what you are looking for?
1992 GMC Sonoma Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...