Question about 1995 Jeep Wrangler

1 Answer

4 cyl. won't start,new plugs, wires,cap,etc.

My 1995 jeep wrangler will not get fire to plugs.put new plug,plug wires,coil, distbr. cap,& rotor.what else would prevent it from starting?

Posted by on

  • 4 more comments 
  • kojakboss May 25, 2009

    could bad timeing chain stop it from getting fire to plugs?

  • kojakboss May 27, 2009

    the wire thatplugs into the coil is getting almost 12 volts.could eng. shut down relay have an effect on it?

  • kojakboss May 30, 2009

    i put a spark plug in the coil wire where power should go to the dist. cap and got no fire .

  • kojakboss May 31, 2009

    its a new coil.

  • Cougar Eloc May 18, 2013

    Change the module in the disrtibuter. If had to change the coil the problem is the module.

  • Anonymous Mar 17, 2014

    new cap /rotor, fule presser 54 steady,new wire and plugs,no code on reader

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

A crank sensor tells the coil to fire.are you getting a signal at the coil to fire?

Posted on May 26, 2009

  • therealgraha May 28, 2009

    if you are getting almost 12 volts at coil. is the coil firing out its wire?

  • therealgraha May 30, 2009

    sounds like the coil is no good

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 jeep wrangler problems


Could also be a fuse or relay problem.
You'll need to find out if the coil has voltage and if the pick-up stator in the distributor is sending a signal to the computer.
Might want to check the computer for trouble codes too.

Jul 08, 2012 | 1995 Jeep Wrangler

1 Answer

Sport Wrangler 6 cyl. Engine lite flashing. Diagnostic tool lists code PO305. I looked it up and it states misfire in cyl #3 & 5. How do I fix this?


Check the plugs, wires and coil pack for these two cylinders. Most lilkely it is the coil pack, they work for 2 cyclinders at a time. cylinder motors use 3 and 8 cyl moters use 4 of these. If your und=sure where the coil pack is, follow it backwards from the spark plugs.

Jul 08, 2011 | 2002 Jeep Wrangler

1 Answer

My1995 Jeep Wrangler is hard to start when it is


CHECK BATTERY VOLTAGE.IT SHOULD BE 12.5 VOLTS.IF BATTERY OKAY.YOUR FUEL FILTER COULD BE STOPPED UP.OR YOU NEED NEW PLUGS + WIRES + CAP AND ROTOR.

Apr 18, 2010 | 1995 Jeep Wrangler

1 Answer

I have a 1998 jeep wrangler 4 cylinder it is not cranking because it is not firing what could be the cause?. I have pulled the plug wire off to see if there is fire but it is not getting fire to the plugs.


COIL PACK HAS PROBALLY CRAPPED OUT.IF IT ELECTRONIC. SEE IF THE COIL WIRE HAS SPARK IF SO COULD BE A BAD CAP WIRES AND PLUGS OR ROTOR OR TIMING HAS JUMPED ON THE ENGINE

Oct 27, 2009 | 2002 Jeep Wrangler

1 Answer

My 1995 jeep rangler want start but it turns over i replace rotar button, plugs, wires, distributor cap it's not getting any fire to the distributor cap


Check coil, crank postion sensor and pickup coil inside the distributor. (most likely the cps or the coil)

Sep 27, 2009 | 1995 Jeep Wrangler

1 Answer

1995 jeep wrangler with a 4.0 liter motor. The


r ur plug wires healthy-they wear from heat n voltage-pull on um n inspec-u can hav ignition module tested @zone along with a code scan

Sep 05, 2009 | 1995 Jeep Wrangler

1 Answer

1988 jeep wrangle


Check your spark plugs. Without good spark plugs the ignition won't ignite. Just go look for Jeep spark plugs at like AutoZone and they are real cheap. To change them you will need a long socket wrench to twist them out and change each one.

Jan 30, 2009 | 1988 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...