Question about 2007 GMC Yukon XL Denali
I have a 2004 GMC Denali XL and the 3rd brake light has not worked for a while. I ordered a new one and installed it...but it doesn't work either. I checked the main fuse and its OK. I'm suspecting its not the light at all. WHAT ELSE SHOULD I CHECK??? Jeff
I received your 3rd brake light flash controller-fully adjustable ez fit kit. installed on my 2002 gmc sierra, power coming into box, good ground and unit is not working. third brake light works good with kit removed. any help would be appreciated. thank you for your time.
Posted on Aug 29, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 gmc sierra brake lights
did u check that they not burn?if not you should Check the wires going into the steering column if you don't have separate turn signal lights and brake lights because if they use the same bulb then the turn signal may be bad. If I remember correctly that particular car doesn't work this way, but I include it just in case.
Posted on Jun 29, 2008
SOURCE: Brake lights do not work
This is a well documented problem, replace the turn signal/multifunction switch to correct this issue, this very problem happened on my GMC, it is a 99 as well, replaced the switch as instructed by a chevy forum member and it fixed the problem
Posted on Nov 07, 2008
Remove bulb, make sure it sits tight in the socket. make sure socket is not burnt up (brown or black in color) Check bulb, if the filament inside is loose or discolored, replace as nesessary. Check brake light switch under driver side dash above brake pedal. make sure it is adjusted correctly.
Posted on Jul 23, 2009
You'll have to gently apply some prying pressure to the housing as you turn the screws, it sounds like they've stripped the part they go in...
Posted on Aug 13, 2009
Tips for a great answer:
Jan 22, 2016 | Cars & Trucks
Jun 24, 2013 | GMC Yukon Denali Cars & Trucks
Nov 19, 2012 | 2004 GMC Envoy
Aug 23, 2011 | GMC C1500 Cars & Trucks
Aug 05, 2009 | 2006 GMC Yukon Denali
Jul 23, 2009 | 2005 GMC Yukon Xl Denali
May 20, 2009 | 2005 GMC Yukon Xl Denali
May 20, 2009 | 2000 GMC Yukon Denali
Feb 02, 2009 | 2004 Cadillac Escalade
975 people viewed this question
Usually answered in minutes!