Question about 1998 Ford Explorer

1 Answer

Oem gear ratio for a 1997 ford f 150 - 1998 Ford Explorer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Look on the door jamb sticker for the axle code and compare it to the chart. please rate as solved if this helps.

oem gear ratio for a 1997 ford f 150 - 7241162.gif
85b0afe.gif
The front and rear axle codes are as follows:

  • Rear axle ratio codes (A) are:
    • 18 — 3.08.
    • 19 — 3.55.
    • 26 — 3.73.
    • 27 — 3.31.
    • H9 — 3.55 Limited slip.
    • B6 — 3.73 Limited Slip.
  • Front axle (B) code.

Posted on May 25, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 158 Answers

SOURCE: my 1997 Ford F-150 (manual transmission 4.6L 4x4)

needs shift fork and/or synchro work in the trans

Posted on Aug 13, 2010

  • 54 Answers

SOURCE: rearend gear ratio and type of a 76 ford f250

Judging by those numbers, gear ratio is 3.31. You can test this theory, by blocking the front wheels and jack the rear end up enough to get the tires off the ground. Then mark one tire with chaulk for a reference and also the drive shaft. rotate the driveshaft one full revolution and the tire should make basically 3 and a third revolutions.

Posted on Jun 01, 2009

  • 29 Answers

SOURCE: shift gears are locked!!

if you mean it will not come out of park then see if your brakes light light up when you step on the pedal if not check the brake light switch under the dash on top of the brake pedal.

Posted on Mar 06, 2009

  • 507 Answers

SOURCE: i need a 1997 ford f 150 key made

Take registration, state photo id, and around $60 to your local dealership and they should be able to reproduce a key for you.

Posted on Feb 09, 2010

wyatt1582
  • 453 Answers

SOURCE: 1997 ford f 150 xlt 4x4 it feels like its stuck in

Check vacuum pod on front axle at the gear hub or pumkin it will have a black plastic cover over it this pod engages the gears for 4X4. Remove cover and spray down with WD 40.

Posted on Mar 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gear shifter is loose and and will move from r to d but does not shift truck out of reverse. The shifter hangs loose. Is there a pin broke or is the shifting cable broke?


1997 F 150 Gear Shift Repair - YouTube

? 5:22
www.youtube.com/watch?v=MsHV09_3JWI
Oct 21, 2012 - Uploaded by DrBobaliscious
... and strengthen a broken gear shift lever on a 1997 Ford F-150.... Loose shift lever on Steering wheel Ford F150 F250 F350 E150 E250 E350

Sep 29, 2015 | 1997 Ford Expedition

1 Answer

What is the recommended trailer towing weight (a suitable range would be ideal) for the F-150 4x4 Supercab XLT Triton, 5.4L EFI V8 Engine, with 17" wheels and 145" wheelbase?


Depending on the gear ratio of your vehicle you have a max capacity of 8,500 or 9,500lbs. Your ideal trailer weight for this vehicle I would say is between 5,000 and 8000lbs. For more info on towing Click here.

Dec 31, 2010 | 2006 Ford F-150

1 Answer

When driving my ford maverick 1997 then slowing down i get a rustling sound coming from the gear box especially when engine braking what could this be


Check the tranny fluid level, and stop engine braking.
While I normally like to do it as well, if you suspect a problem, it is not worth it to let it get worse.
Since trucks have lower gear ratios, it is possible to put on too much stress with engine braking.

Sep 16, 2010 | 1997 Ford Ranger SuperCab

1 Answer

1997 Ford ExploreR with the following codes P1762, P0732 and P0735


p0732
incorrect gear ratio,second gear

p0735
incorrect gear ratio, fifth gear

p1762
are you sure this is the code number it is a manufacturer-specific code. and i'm not seeing it in my bood check to see if you have the right numbers on it.

Aug 21, 2010 | 1998 Ford Explorer

1 Answer

Need wiring diagram for a 1997 ford f 150 p/u 4wd


The field wire to the starter has a small eyelet connector that connects to the small terminal on the starter solenoid (sometimes marked "S").

All other wires have a large eyelet connector and they are all connected together with the battery cable to the large terminal on the starter solenoid (sometimes marked "BAT").

Sometimes the field wire to the starter is a push on type connector, and there would only be one obvious terminal on the starter solenoid that it could be connected to.

May 02, 2010 | 1997 Ford F150 Regular Cab

1 Answer

What is the stock gear ratio in a thunderbird with


there are 6 different options but I think yours is 2.73:1

look at the tag to know for sure
2.73 : 1
3.08 : 1
3.27 : 1
3.45 : 1
3.55 : 1
3.73 : 1


Mar 25, 2010 | 1997 Ford Thunderbird LX

1 Answer

1997 ford f 150 xlt 4x4 it feels like its stuck in low gears it goes in all the gears and not in 4x4


Check vacuum pod on front axle at the gear hub or pumkin it will have a black plastic cover over it this pod engages the gears for 4X4. Remove cover and spray down with WD 40.

Mar 12, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Need gear ratio on 2005 F150 4X4 with axle code 19


here's a sure way. Jack up 1 side of the rear end, unless it's limited slip then both now with vehicle out of gear make a mark on tire at straight up. Now mark your defferintial behind the drive shaft is good or any where you can observe the results. Now turn tire 1 revoloution and have someone count hte revs of the drive shaft or deferintial. Most likely on that truck it will be 3 and a half turns or a 3.50 gear works every time especially if your hip on your axle ratio availability for the specific vehicle in question. Your fixed have fun! Dc

Jun 07, 2009 | 2006 Ford F-150

1 Answer

Is there a maximum speed for high 4x4 on the 2008 f-150 supercrew?


Let common sense be your guide. 4HI puts power to the front and rear wheels at the same ratio as in 2wd for gear selected, allowing for better traction at higher speeds. 4LO puts power to the wheels at a ratio for more torque to the wheels.Just remember that all 4 tires are pulling so handling may be alittle different.

Dec 22, 2008 | 2008 Ford F 250 Super Duty 4WD

Not finding what you are looking for?
1998 Ford Explorer Logo

Related Topics:

3,504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...