Question about 1996 Chevrolet Blazer

1 Answer

After replacing transmission with 191,00 miles there is no second and overdrive gear. Rebuilt transmission replacing all solenoids, wiring harness and valve body plate still no second and overdrive g

After rebuilding my transmission in my 1994 GMC sierra it does not have second and overdrive gears. I replaced all the solenoid switches and valve body plate. This is the same thing it was doing before rebuilding the transmission. It has 191,000 miles and was shifting good before I replace the fluid. After replacing the fluid thats when my problem started. Thats why I rebuilt the transmission but it is doing the same thing. Please help I don't know what else to do.

Posted by on

  • Anonymous Mar 19, 2014

    What's the cost to rebuild the transmission.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

Make sure your shift linkage is tight and alighned properly

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is overdrive light flashing orange when the car warms up and has been driven for about 8 miles?


/D OFF Indicator The instrument cluster receives the O/D OFF indicator status from the PCM over the communication network. When the overdrive function is turned off, the PCM sends a command to the instrument cluster to turn on the O/D OFF indicator. When a powertrain concern exists, the O/D OFF indicator flashes amber and illuminates green when overdrive is selected off. What code ? you said solenoid A -
P0750 SSA SSA Solenoid Circuit Failure SSA circuit failed to provide voltage drop across solenoid. Circuit open or shorted or PCM driver failure during on-board diagnostic. No reverse gear (short) or no 4th gear (open). MIL on. Go To Pinpoint Test A . P0751 SSA SSA Functional Failure (Stuck Off) Mechanical or hydraulic failure of the shift solenoid. Not all gears present, MIL on. Refer to Diagnosis By Symptom . P0752 SSA SSA Functional Failure (Stuck On) Mechanical or hydraulic failure of the shift solenoid. Not all gears present, MIL on. Refer to Diagnosis By Symptom . P0753 SSA SSA Solenoid Circuit Failure SSA circuit failed to provide voltage drop across solenoid. Circuit open or shorted or PCM driver failure during on-board diagnostic. No reverse gear (short) or no 4th gear (open). MIL off. Go To Pinpoint Test A . Could be a wiring problem . Did you check the solenoid A wiring circuit back to the PCM ?

Dec 30, 2015 | 2007 Ford Focus 2.0

2 Answers

How to fix a ford f150 with trans fault and flashing overdrive light with diagnostic codes p0731 and p0732>


P0731 Ford - Incorrect First Gear Ratio
Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

p0732 Gear 2 Incorrect ratio
Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Shift Solenoids
- Shift Solenoids harness is open or shorted
- Shift Solenoids circuit poot electrical connection
- Transmission mechanical problems
- Transmission hydraulic control circuit

Start by inspecting the transmission oil level and condition, and change fluid if necessary.

also check OUTPUT SHAFT SPEED OSS for proper installation and function

hope this helps

Sep 16, 2014 | Ford F-150 Cars & Trucks

1 Answer

A have 2002 ford explorer overdrive light flashes and a code p0745. When I had the car for the first there was no check light and overdrive light wasn't on, as soon I drove the vehicle for half a mile the...


When the a transmission solenoid is malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.

Read more: http://engine-codes.com/p0745_nissan.html#ixzz2juUvQKpy

Nov 06, 2013 | Cars & Trucks

1 Answer

Where is the overdrive solenoid located on my 2001 Buick park avenue? I have the transmission pan off , can i put that back on and still put the solenoid? i would like a diagram of where it is located


You will need to pull off the side pan cover thats where the overdrive solenoid is located, lets see if i can get you a diagram to help you loacte it.i will tell you that there are two shift solenoid to control the gears and overdrive, there have been problems with jerking in overdrive this is due to the tcc solenoid and wiring harness and also the computer must be reflashed, dealer has update shifting and thats a must, i would replace that as far as the overdrive solenoid here are diagrams. the computer uses the shift solenoid with the pressure solenoid to control the overdrive i have circled the solenoid to replace , as theres not just one to control overdrive i have listed the one that control it .hope this helps.johnjohn2_161.gifjohnjohn2_162.gifjohnjohn2_163.gif

Sep 24, 2011 | 2001 Buick Park Avenue

2 Answers

P1746 THE OVERDRIVE LIGHT FLASHES AND WHEN ITS


CODE P1746 - EPC SOLENOID CIRCUIT MALFUNCTION. WHEN THIS CODE APPEARS THE ENGINE STARTED VECHICLE IN GEAR AND THE PCM DETECTED THE ELECTRONIC PRESSURE CONTROL EPC SOLENOID CIRCUIT INDICATED OPEN THIS FAULT CAN CAUSE HARSH ENGAGEMENTS AND SHIFTS. EPC MEAN ELECTRONIC PRESSURE SOLENOID.

Jun 01, 2011 | 1995 Ford Windstar

1 Answer

How do I locate the transmission shift soleniod. I this a promlem I can fix? Can I get to it without dropping the transmission. Ihave access to an auto shop, or should I take it to a transmission shop?


Its located inside the trans and need to open the drain plug on the transmission oil pan with a socket and drain the oil into a drain pan, then need to remove the bolts that secure the transmission oil pan to the transmission.

Now could you to remove the bolt that holds the transmission dipstick bracket to the bell housing with a socket. You can locate the bolt from the engine compartment. Place a scraper between the transmission pan and the bottom of the transmission and break the seal loose so you can remove the pan.

Remove the defective solenoid by removing the bolt that secures the solenoid to the harness. Three solenoids control the shifting on the Jeep. All have white and yellow wiring harnesses connected to them. The solenoid to the left (towards the Cherokee's engine) controls shifting "overdrive." The solenoid in the middle controls shifts between second and third gear. The third solenoid, closest to the rear of the Cherokee, controls shifts between first and second and between third and fourth. If you know which gear your transmission is stuck in, replace the solenoid that corresponds with that gear. If you are not sure, remove all three. Additionald etalis can find in this link: Jeep Secc-21S-Automatic-Transmission-42RE

Why you askw about this? Has some symthom or fault code there?

Feb 10, 2011 | 1999 Jeep Grand Cherokee

1 Answer

1998 dodge 3500 will not go in overdrive so i had transmission rebuilt it will not stay in overdrive for only 2 or 3 miles i took the truck to advance auto they check it with a scanner and said it was...


If the parts are functioning correctly as you say which sounds like they do you must have a weak computer that needs replacing instead. If a short was there no overdrive will work at all times

Nov 20, 2010 | Dodge Ram 3500 Cars & Trucks

1 Answer

1988 chevy c1500 problem with second gear


be 1988 and Im sure it has high miles, sound like worn transmission, transmission flush and replace it with new fluid might help some. get use tranny from a junk yard better and cost lot less than rebuilt. being GM mechanic for many years i see transmission on a truck with 100k tend to have leaks or need rebuilding. again i see some have better luck but rear.

Aug 31, 2009 | 1988 Chevrolet C1500

3 Answers

Code0755 shift solenoid b after about ten miles next day whilst driving in fourth transmission goes into second


If you were to take the solenoid pack apart you would find a bad connection on that solenoid. You sill need a new pack installed.

Aug 11, 2008 | 1993 Chrysler Town & Country

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...