Question about 2000 GMC Jimmy

3 Answers

Removing the Water Pump

I'm replacing the water pump on a 2000 GMC Jimmy, but unable to remove the fan. I took off the 4 bolts but still am unable to remove it properly.

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • GMC Master
  • 3,854 Answers

Here is a link that I hope will make your job easier. http://www.handymanlyness.com/archives/auto/repair/cooling_system/ water_pump/GMC/V6/Jimmy_wpr.html

Gooc luck and hope this helps. It's what i used to change mine and was very helpful.

Posted on May 25, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

While still on motor use a hammer and screw driver...put slot screw driver on an edge of the nut holding fan on and a quick hit with hammer..that should free the nut to hand screw off

Posted on Dec 14, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,055 Answers

If its clutch fan,you need too hold the shaft and unscrew it!!!!!!

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to remove the fan clutch in order to change the water pump


Thread on type. Loosen fan clutch counter clockwise for removal. Requires 36mm wrench (or adjustable crescent wrench).

Dec 31, 2012 | 1997 GMC Jimmy

1 Answer

How to change the water pump on 98 GMC Sierra


Michael is correct on replacing water pump but if you are mech. inclined it can be done by removing upper fan shroud and serp. belt only. leave fan on pump until removed. remove 4 15mill bolts and the whole assembly. apply gasket sealer to both sides of gasket and insert 2 upper bolts to keep gasket in place when reinstalling.I have a 1998 gmc and did this a couple days ago while installing injection spider.

Jul 28, 2012 | 1998 GMC Sierra

1 Answer

Steps to remove water pump


Water pump on that should be no more then 2 hours labor if you are farming it out to a pro. Remove top half of fan shroud. 4 bolts. Remove Clutch fan. Remove serpeitne belt. Remove 4 bolts holding pump on to block. Reverse process. To install.

Feb 19, 2011 | 1999 GMC Jimmy

1 Answer

How to replace 94' jimmy water pump?


It is prob. a little late, looking at your posting date. But, it should be as easy as pulling the serpentine belt off, removing the fan and the the water pump should follow with the removal of a few bolts. After that I suggest you take a shop towel and stuff in the hole to absorb the fluid that will leak out slowly and put silicone on the around the edge of the new water pump before putting it on, creating a solid seal, it doesn't take much to get the results. Then just put it all back together.
I'm not sure which motor you have in your Jimmy, but it is basically the same with all of them. Hope this is helpful in the future to anyone.

Sep 23, 2010 | 1994 GMC Jimmy

1 Answer

How to replace a water pump on a 2000 GMC Safari


drain the radiator coolant,remove air cleaner assy,remove the mass iarfow,remove the upper shruod,remove drive belt,remove fan and fan blade assy,remove coolant pump bolts and pulley,disconnect the coolant byoass hose and clamp,disconnect the radiator hose from coolant pump,remove the 4 coolant punp bolts coolant pump and the gasket,,revise at installation.

Jun 28, 2010 | 2000 GMC Safari

1 Answer

Removing the water pump 2000 gmc jimmy


drain coolant, remove drivebelt, remove upper fan shroud, remove cooling fan and clutch assemblyremove water pump drive pulley mounting bolts, remove upper hose from the water pump, remove water pump mounting bolts, remove water pump from the engine, remove gasket, and make sure that all mating surface are clean and free of gasket materials or burrs

Jun 20, 2010 | 2000 GMC Jimmy

1 Answer

1998 Jimmy: How do I replace the water pump to my 1998 GMC Jim...


You will have to take the fan and fan clutch off to get to the water pump. It is best to go to oriellys and put a deposit on the fan removal tool it will be easier on you. Than there is only four bolt holding the water on.

May 16, 2010 | 1998 GMC Jimmy

2 Answers

Replace water pump on 1997 gmc jimmy 4.3 litre


there are four nuts that you must remove at the front of the pulley between the fan. remove fan, fan shroud,loosen accessory belts. remove water pump pulley and the pump bolts will be exposed. check belts for replacement while you have them loose. reverse procedure to install.

Apr 29, 2010 | 1997 GMC Jimmy

1 Answer

Need to replace the water pump on a 1992 gmc pick-up need diagram of how to replace do I need to pull the fan cluch and radiator to get to it???


hi,first off you have to remove the acc. drive belts, ac,alt.,pwr str belt etc.but loosen up the 4 bolts that hold the fan to the water pump.then remove any brackets 4 bolts hold the water pump in place and remove water hoses before removing pump bolts. clean and replace gaskets and pump reinstall all parts and added coolant .also you may want to replace thermostat.

Oct 23, 2009 | 1992 GMC Sierra K1500

1 Answer

I need directions to change my water pump


drain engine coolant.relieve belt tension .and remove the drive belt.remove upper fan shroud.remove fan or fan and clutch assembly.remove water pump pulley and coolant hoses from water pump.remove water pump bolts.then remove pump from engine.pay attention to bolts location because they are different lenghts.clean water pump gasket mounting surface dont scratch .or pump gasket wont seal and leak .apply sealant to water pump bolts.install water pump with new gasket.if gasket paper put a sealant on it.torque water pump bolts to 30 ft lbs.if you got a 2.2L engine torque water pump bolts to 18 ft lbs.install coolant hoses on pump .install water pump pulley.install fan and fan clutch assembly.install the drive belt .and the upper fan shroud.fill the radiator with coolant.then run engine to check for leaks.WARNING AS A SAFETY PRECAUTION REMOVE NEGATIVE BATTERY CABLE SO CAR WONT BE CRANK BY ACCIDENT. ALSOOOO DONT FORGET TO TURN OFF RADIO FIRST BEFORE DISCONNECTING BATTERY SO YOU WONT LOSE YOUR RADIO CODE.

Jun 01, 2009 | 1999 GMC Jimmy

Not finding what you are looking for?
2000 GMC Jimmy Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...