Question about 1987 Ford Crown Victoria

2 Answers

NO POWER TO FUEL PUMP

NO POWER FROM RELAY SWITCH TO FUEL CUT OFF IN TRUNK WHICH FEEDS FUEL PUMP WITH POWER, 1987 FORD CROW VIC

Posted by on

  • bosnbrown May 25, 2009

    IT HAS POWER TO 3 WIRES COMING INTO THE RELAY NO POWER ON ORANGE WIRE COMINGOUT

  • thomas tysiak May 11, 2010

    does it have power to the relay or to the relay control circuit which pins are you testing

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

Then replace relay if there is power to it but none out

Posted on May 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Relay has power to it from the battery?

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel pump relay location


Yes In the trunk of some of the Crown Vics there is a switch next to the air ride control. It is called an Inertia switch and has a reset button. If you do not find this switch in the trunk, you will find it behind one of the kick panels above the front seat floorboard. It will sometimes activate by mistake with an impact.

The fuel pump relay should be in a Relay trio that is piggy-back to the Powerbox under the hood on the driver's side. There are plastic clips on one end which when pressed will allow the Relay trio to slide out of the case and towards the engine.

Oct 22, 2013 | Ford Crown Victoria Cars & Trucks

1 Answer

LOCATION OF THE STARTER MOTOR RELAY AND THE LOCATION OF THE FUEL PUMP RELAY SWITCH ON A 1984 CROWN VIC. IT HAS'NT BEEN STARTED IN A FEW YEARS AND WE ARE TRYING TO TRACE THE PROBLEM


the starter relay is by the battery , follow the positive cable to it. that car should have a FUEL PUMP INERTIA switch. in the trunk, it should be well marked

Sep 01, 2011 | Ford Crown Victoria Cars & Trucks

1 Answer

The fuel pump don't get electric power, I follow the positive fuel pump supply wire and localized it going in a electric black box just above the cooler radiator, and the line (pink with a black...


RESET THE INERTIA SWITCH LOCATED ON THE HINGE SUPPORT BEHIND THE LEFT INNER WHEEL HOUSE IN THE TRUNK AREA.FORD TAURUS STATION WAGON LOOK LOWER CORNER PILLAR REINFORCEMENT.RESET INERTIA SWITCH SEE IF FUEL PUMP WORKS.IF SO SWITCH COULD BE BAD TRIPPING OFF THE FUEL PUMP.

Jun 19, 2011 | 1987 Ford Taurus

3 Answers

No power to fuel pump on 1999 crown victoria


Hello abzalkhan193
Heres a few things to check that could cut power to the fuel pump. The fuel pump inertia shutoff sw
in the trunk on the left side, there is a reset button on the switch if you push the button down and
you hear/feel a click then the switch was tripped and you just reset it. The switch's job is to cut off
the fuel in case of an accident. Next, the fuel pump fuse located in the battery fuse block under the
hood on the right fender well, fuse #1 20amp fuse. Next, the fuel pump relay, the relay is located in
relay center on the left fender well. Hope this is helpful.

Mar 11, 2011 | 2001 Ford Crown Victoria

1 Answer

1992 ford crown vic working fine, next day no power to fuel pump or cut off switch


  1. Hi Domino, The fuel shut off is powered by the fuel pump relay (which is in the engine compartment fuse block) the fuel pump relay is powered by the EEC power relay(PCM relay) you will have to check for distribution and voltage. I hope this helps!

Aug 31, 2010 | 1992 Ford Crown Victoria

2 Answers

Where is the fuel pump relay located on a 87 crown victoria


It's located in the trunk on the drivers side behind the trunk carpet.

Aug 17, 2010 | 1987 Ford Crown Victoria

3 Answers

No power to fuel pump car was running fine just quit repalced fuel pump no power to pump, car will start when spraying starting fluid in to intake, is there a fuse ? also replaced ECM, fuel filter,...


Check for 12 volts power at the fuel pump harness. If no power is going to the pump, check the fuel pump relay. Also, check the fuel pump inertia switch. Ford usually has it on either inside left or right rear trunk fenders.

Apr 09, 2010 | 1987 Ford Taurus

1 Answer

2003 CROWN VIC HAS NO SPARK AND NO POWER TO FUEL PUMP CHECKED RELAYS AND FUSES CHANGED CRANK AND CAM SESOR LOOKED FOR BAD GROUND AND BROKEN WIRES AND HELP PLEASE


DID YOU CHECK THE FUEL PUMP SHUTOFF SAFETY SWITCH ON THE LH/DRIVERS SIDE IN THE TRUNK & MAKE SURE IT IS DOWN ,& EVEN IF IT IS SOMETIMES YOU CAN TAKE SOMETHING & PUSH IT UP & THEN PUSH IT BACK DOWN & IT WILL CRANK,& BELOW THAT SWITCH IN THE TRUNK IS A FUEL PUMP DRIVER MODULE ,IT MAY BE BAD,THOSE ARE A COUPLE OF THINGS THAT HAVE WORKED FOR ME ,& THATS PRETTY MUCH ALL I DO IS WORK ON FORDS, & LX CROWN VICS & P71 POLICE CROWN VICS WHERE I AM WORKING, HOPE THAT IT MIGHT HELP YOU FIX IT. SEAN

Nov 02, 2009 | 2003 Ford Crown Victoria

2 Answers

Fuel pump for a 1987 Tempo


If I remember correctly, I think those tempo's had a fuel shut-off trip switch in case of collision. Look in rear drivers side trunk, and pull driver side panel off. You should see a switch in there with a plunger on top that you push down to reset. Worth a try.

Dec 21, 2008 | 1987 Ford Tempo

Not finding what you are looking for?
Cars & Trucks Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...