At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Does the noise sound like its coming out of the engine or transimission because I can't help,you if I'm not there but does it sound like a tapping noise a lifter or or does it sound like a idle pulley get back I'll help you good lucl
It means that the Parking position Shifter does not giving signal to ignition and by pushing the shifter even more and then you start ok it shows the problem you have.Therefore ask a qualified mechanic to adjust the shifter position in order to avoid this problem.
is it in park try moving to neutal and see if it starts could be starter problem relay problem security problem are the lights on the dash for a security or key yellow light on or flashing need more imfo
Fist check the transmission fluid level by putting the truck in neutal with the parking break on, leave the engine running, open the hood pull the dipstick labeld trans out wipe it clean the put it in and pullit out to take a measurement if it is low fill it up and this should solve your problem if not, then you may have a broken syncros plate in the r=tranmission and you need to have it replaced.
So what it only does it in park or neutral ! The vehicle starting circuit is only suppose to let it start in park or neutal . Park neutral safety switch won't allow B+ voltage to S terminal on the starter solenoid unless the vehicle is in park or neutral . It's probably the starter relay contacts stuck closed . You really should learn how it works before guessing as to the problem . Plus learn automotive electrical testing ! The ignition switch when turned to the start position send's a voltage signal to the PCM - engine computer .The PCM will energize the starter relay to crank the engine . PCM / ABS 10amp fuse in the I/P fuse box supply's B+ voltage to the park / neutral safety switch . When in park or neutral the B+ voltage goes through the control side of the relay to the PCM which will supply a ground to energize the starter relay .
You culd be having more than one problem. First if you are having problem putting the car in park. The car may not actually be fully in park and therefore the neutral safety switch is active and telling to car you are in revers or in gear. If this is true then your car won't start for safety reasons. Try putting it in Neutral and see if it starts then. Ormay have a neutal safety switch that is bad. Can you hear the starter click when you turn the key to start?
×