Question about 2000 Oldsmobile Intrigue

1 Answer

Stick shifter How do I remove and replace the automatic stick shifter inside the car.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

To remove the shifter put your E-BREAK on and shift you car all the way in third gear then look on the back of the shifter there is a pin all you need to do is take a flat head screwdriver of needle nose pliers and pull the pin out

Posted on Aug 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On an automatic stick shift the stick shift came apart. What holds the knob on the gear shift rod?


Honda Accord - YouTube

? 5:31
www.youtube.com/watch?v=gRPG8D7Pa-U
Dec 20, 2010 - Uploaded by Auto Parts Direct To You How To Repair / Replace A Broken Or Stuck Shifter Shift HandleButton Knob On 2003-2006 Honda Accord .... How to Fix Your Loose Stick (manual shift stick) - Duration: 6:17. by Fixbook 165,139 views ... How to change a gear shifter light on a 2003honda accord - Duration: 4:04. by Joe Lester 46,291 ...

Sep 24, 2015 | 1998 Honda Civic

2 Answers

Where is the location of fuse for the light in the stick shift.


There is no fuse specific to this light. This light is fused with the park lights. If the park lights work,suspect the shifter bulb to be burned out

Jul 09, 2015 | 2006 Ford Explorer

1 Answer

My Mazda 2000 AUTOMATIC transmission suddenly will shift to a gear but will not engage. You can slide the stick to a different gear without pressing the button on the stick. I was told the shifter actuator...


dude go to a parts store and get a printout for removal- replacement of a shifter linkage..then go to a salvage yard and get a used cable and shifter setup and put it in yourself if possible..its not that hard...

Dec 08, 2013 | Cars & Trucks

1 Answer

Automatic shifter floats between drive and neutral


your shifter needs to be adjusted no parts need it take it to a shop because they have to figure out if is in your shifter or in the transmission where needs adjustment more likely in your shift

Oct 06, 2013 | 2004 Mitsubishi Endeavor

2 Answers

98 Pontiac Trans am automatic trans...


The front of the handle has a large "U" clip. Use a screw drive and pry the clip out. It's a lot easier to do when the shifter is pulled all the way back to "1" or "2" but is doable in park still. The handle will then pull up. There will be a plastic piece in it that pushes down to release the lock in the shifter assembly. If when you push the plastic piece down it doesn't release the lock you will have to remove the shifter cover and take a look inside, to see what broke. It may require replacing the whole shifter assembly. You should be able to find the complete assembly used for fairly cheap.

Jan 02, 2010 | 1999 Pontiac Firebird

1 Answer

Dual gate Hurst shifter adjustment


Hello! Here is what I was able to track down:

Hurst Dual Gate Shifter Assembly Parts Breakdown:


c73f4fe.gif

Removing & Replacing The Hurst Dual/Gate
1. Disconnect car battery.

2. Remove Knob. Remove four Phillips head screws that hold escutcheon plate down to console.
NOTE: SHORT SCREW IS USED IN REAR RIGHT - HAND HOLE. Remove escutcheon plate and console from floor tunnel.

3. Lift selector indicator lamp housing out of shifter and pull bulb socket out of lamp housing. Disconnect wire connectors from combination Back - up light / Neutral safety switch.

4. Remove two 1/4 - 20 x 1/2 hex-head cap screws that fasten Dual / Gate shifter to rear mounting bracket. Remove 1/4 - 20 x 1/2 hex - head cap screw that holds cable bracket to shifter frame. Remove two #10 - 32 x 3/8 slotted head cap screws that fasten Dual / Gate shifter to front bracket. Free shifter from cable by removing cotter pin and washer.

5. Remove combination Neutral - safety / and Back - up light switch. Install switch on Replacement unit.

6. Install replacement shifter unit in reverse order of removal of original unit.

7. ADJUST CABLE: SEE FIGURE 1 (Below)
Loosen nut that fastens cable pin to transmission control arm. Loosen nut enough to allow pin to slide in the slot in the arm. Turn the arm to NEUTRAL position. Move the stick to NEUTRAL. Tighten the adjusting nut. Test movement of stick and check to be sure that stick positions agree with transmission control operation.


43402db.gif
8. SEE FIGURE 2 (Below)
Connect car battery. Apply hand brake. Move stick to NEUTR AL position. Press foot on brake pedal. Start engine. If starter fails to operate, Neutral Safety switch must be adjusted. Adjustment is made with a long-bladed Phillips screwdriver through the "Street" gate. This screw is directly in front of the st ick. Turn the screw about 1/2 turn past the point where starter operates. (STICK MUST REMAIN IN "NEUTRAL" WHILE ADJUSTMENT IS MADE). Starter should operate ONLY when stick is in PARK or NEUTRAL position.


522a7e2.gif

Hope this helps and thanks for using FixYa!

Oct 22, 2009 | Pontiac GTO Cars & Trucks

1 Answer

Automatic shift has trouble getting into gear


If you have spilled any coke or coffee on shifter it will cause the shift lock actuator to stick if you have floor shifter. You will have to remove center console to clean. If nothing has been spilled shift lock actuator needs to be replaced.

Jul 24, 2009 | 1997 Ford Expedition

1 Answer

Neutral ignition switch


automatic or stick? makes a difference, if it's a stick it's on the chutch pedal if it's an automatic it's on the transmisson where the linkage hooks up to the shifter, remove the linkage by removing the nut that hold the shifter on then remove the screws that hold the safety netural backup light switch on be sure you have the E brake on before removing and chalk the wheels remove the switch and go to the parts store and buy a new switch and replace you will have to disconnect the wire harness connted to the switch as well it is a short wire with 4 wire or sometimes 5 on it when installing the new switch be sure to move the new switch to the forward postion so that it set on the can correctly you can turn the inside ring with your fingers to move it once it is lined up replace hold down screws and replace linkage nut.

May 27, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Transmission?


It may be the shifter lever bushing at the base of the shifter. To check you must remove the stick shift cover. With the stick exposed, push down and turn on the plate that holds the shifter shaft. It is spring loaded and may take some effort. ( Remove stick while in neutral) Pull the stick out of the trans where the stick shift pivots should be a rubber bushing about the size of a half dollar. I think you can only get this part at a Toyota dealer. Hope this helps !

Apr 13, 2009 | 1995 Toyota Corolla

1 Answer

Automatic transmission


low transmission fluid will not effect the hand shifter performance..to check your fluid let the vehicle run untill the temp reading is in the middle then shut it off.and within 90 seconds remove the stick wipe clean reinsert the stick remove again and see where wet mark ends

Oct 16, 2008 | 2007 Honda Accord Sedan

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...