Question about 1988 Dodge D-Series Pickups

1 Answer

1985 ramcharger transmission doesn't engage

I swapped engines now transmission doesn't engage. Worked fine before swap now it does nothing. Could it be something as simple as a vacuum line or something i missed?

Posted by on

  • 2 more comments 
  • nesmith513 May 26, 2009

    yes the torque converter is bolted up

  • Chris
    Chris May 11, 2010

    before you bolted up the torque converter did you make sure to push it all the way back into the transmission?

  • mike ryner
    mike ryner May 11, 2010

    Are you sure you bolted up the torque converter?

  • Chris
    Chris May 11, 2010

    did you check all wiring and fuses?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If your torque converter on the front of the trans wasnt seated properly before the engine was set in and tightened at the bell housing, you may have cracked the front pump on the tranny

Posted on Oct 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I swapped out a 2003 4L80E transmission for a 19994L80E transmission that was running fine in my friends Suburban that was working fine whith no trouble but it will not engage now. Any suggestions?


they are different years 1999 is up to 2000/2001 then the 2003 is 2001 to 2004/5. auto box module works different, box's look the same but the sensors are different inside you would need to change the auto module and pair it to your ecu on your engine.

May 29, 2014 | 2003 GMC Sierra 2500HD

1 Answer

Swapped out engine now transmission won't engage


I hate to ask this but... Was there a flywheel on your engine and if so did you bolt it to the torque converter? Swapping an engine should have no ill affects on the trans unless of course the torque converter is not bolted to it. If all is ok then its time to look at a transmission problem. best of luck!

Mar 14, 2010 | 1999 GMC Suburban

2 Answers

What is the automatic transmission fluid capacity for a 1988 dodge ramcharger 4wd 5.2L engine


To find the correct specification, we need additional information about your 1988 Dodge Truck Ramcharger 4WD 5.2L FI 8cyl:

A999/32RH Transmission model
Transmission Fluid Capacity 4 Quarts
Application:
Fluid and filter change

Transmission Fluid Type 06810

Application:
With automatic transmission
Note :
Castrol ATF +4 ATF


Transmission model A727 or 36RH
4 Quarts
Application:
Fluid and filter change
With lock up

Transmission Fluid Type 29201

Application:
With automatic transmission
Note :
Coastal(R)+4(R)ATF

06810
Application:
With automatic transmission
Note :
Castrol ATF +4 ATF

VV346
Application:
With automatic transmission
Note :
Valvoline ATF+4 Full Synthetic ATF


Lubrication chart for 1985-88 100, 200, 300 4WD

143b247.jpg

Hope helped (remember rated this post).

Feb 25, 2010 | 1988 Dodge Ramcharger

1 Answer

I have a 94 s-10 4x4 with a 4l60e I swapped the motor. now the transmission shifts very quickly from first to forth and then to lockup and about kills engine . its also sitting an egr code 32 I have...


the engine was not a match from the same building codes as yours. computerized engine swaps must be exact swaps or problems will arise such as yours

Feb 24, 2010 | 1993 Chevrolet S-10

1 Answer

2000 Celica Engine Swap


you can just pull out the engine alone and leave the transmission. It depends how difficult pulling out the engine. You can also take the transmision with the engine

Oct 03, 2009 | 2000 Toyota Celica

1 Answer

1985 Mercedes 190E auto tranny swap - wont go into gear


are you checking tranny fluid level.check condition of fluid if it look brown smells change tranny fluid and filter.fluid change dont help .you got pump and input clutch problems.

Apr 28, 2009 | 1985 Mercedes-Benz 190

3 Answers

Engine swap 1985 240 DG into 1983 Volvo 245


Go ahead and swap the transmissions, and that should be about it. The b230 and b23 engines are basically the same block, so there should be no trouble there.

Apr 07, 2009 | 1984 Volvo 240 Series

1 Answer

Swapped trans. now it wont shift?


change the shift solnoids should do the trick

Jan 19, 2009 | 1995 Pontiac Bonneville

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...